Jump to content
HWBOT Community Forums

Evga Untouchables Rev0.1 testing on GTX285


Chiller

Recommended Posts

I tested last weekend a Untouchables Rev0.1 10+3Phase mounted on a Evga GTX285 for the GPU.

first i tested it on Dice, to see how it reacts etc...

 

And must say :

 

Evga, DAMN SWEET JOB that you made this thing.

Next runs will be on LN² and hopefully take good places with the gtx285 on hwbot.

first some pics of the vga then some pics and links of the first test runs.

 

 

The card with Untouchable :

 

103v5z4.jpg

 

whfhbn.jpg

 

35klf1y.jpg

 

4t4shc.jpg

 

2ibk9zd.jpg

 

9k1gk4.jpg

 

 

The scores on hwbot :

 

3dmark01 17th place http://hwbot.org/submission/2214107_

 

3dmark03 12th place http://hwbot.org/submission/2214120_

 

3Dmark05 7th place http://hwbot.org/submission/2214122_

 

3Dmark06 13th place http://hwbot.org/submission/2214123_

 

3Dmark vantage 11th place http://hwbot.org/submission/2214119_

 

Aquamark 6th place http://hwbot.org/submission/2214118_

 

Really need some ln² in the house for really bench this card with Untouchable.

This is pure workmanship on highest level this Untouchables !!!!

 

Keep it going with top hardware Evga !!

 

EDIT UPDATE :

 

GTX285 + Untouchables on LN² +1000Mhz core :

 

 

update :

 

 

 

GTX285 + Untouchables on LN² +1000Mhz core :

 

 

Aquamark 6de place : http://hwbot.org/submission/2218502_

3Dmark03 10de place : http://hwbot.org/submission/2218500_

3Dmark05 7de place : http://hwbot.org/submission/2218496_

3Dmark06 9de place : http://hwbot.org/submission/2218474_

3Dmark Vantage 5de place : http://hwbot.org/submission/2218499_

 

mrqlxv.jpg

 

11144dh.jpg

Edited by Chiller
Link to comment
Share on other sites

Where is the ''I like'' button ?

 

don't know, can't you make a button here? :P

 

I'm interested in seeing what kind of boost these PWM cards give to GPUs. Stock PWM Vs this.

 

At the moment, I consider them "psychological warfare"

 

It will be better, more stable and better OC then stock PWM,

because stock PWM was only 4phase and now with the Untouchables Rev0.1 it's 10+3phase, only the vMEM is not used, mem still get's it's power from stock PWM.

 

Only 10phase from Untouchy are connected for vGPU, much more cleaner power, less rimple effect in current etc.....

 

And fine tuning voltages by EVbot

Edited by Chiller
Link to comment
Share on other sites

every vga is different, the one is better then another one.

 

But cleaner power, less rimple, more ampere possible, accurate setting of vGPU etc etc etc, will only make overclock better, higher and more stable then the stock PWM.

 

It's pure electronics offcourse.

Link to comment
Share on other sites

GTX285 with only a 4-phase PWM???

 

GTX260-192 has 3-phase :P

 

Are you sure the card you have is not 6+1?

 

The BEST card (tested & confirmed awesome with stock PWM) + eVGA PWM board might make for some nice hardware rankings, but IMHO no amount of good soldering + this PWM board will make an average card better than a great hand-binned card.

Edited by K404
Link to comment
Share on other sites

it's the idea of having fun, and make some HW points lol.

 

It can't be bad for the vga offcourse.

Next will be an Evga 8800GT 512mb on the untouchables.

 

Exactly! Even if it just gives you 30 MHZ more, it was worth it...it's not about binning cards, it's how much you can get out of what you have ;)

 

Excellent work there!

Link to comment
Share on other sites

Looking good :)

 

One of the great things with this device is that it can save old cards that would have been thrown out. I have 2 x HD5850 + 1 x GTX285 that can't run without it and now I can bench them again!

 

Please give more pics of the soldering, might also a few pictures of how you put it together? How big soldering Iron do you needed ?

 

Vdrop? I can't see many condensators :D But nice job

Link to comment
Share on other sites

More pics will follow.

 

Vdrop is very low, because the Untouchables is very powerfull, very stable.

Had constant measurement of vGPU while benching.

 

Was thinking of adding more Capacitors, but this is rock solid as it is.

 

How and what is more info here : http://kingpincooling.com/forum/showthread.php?t=980

 

http://kingpincooling.com/forum/showthread.php?t=1095

Edited by Chiller
Link to comment
Share on other sites

  • 2 weeks later...

GTX285 + Untouchables on LN² +1000Mhz core :

 

 

Aquamark 6de place : http://hwbot.org/submission/2218502_

3Dmark03 10de place : http://hwbot.org/submission/2218500_

3Dmark05 7de place : http://hwbot.org/submission/2218496_

3Dmark06 9de place : http://hwbot.org/submission/2218474_

3Dmark Vantage 5de place : http://hwbot.org/submission/2218499_

 

mrqlxv.jpg

 

11144dh.jpg

Link to comment
Share on other sites

  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...