October 29, 201212 yr Author 3DMark11 & Heaven LN2 result MPower & 7970 Lightning http://www.hwbot.org/submission/2324393_ http://www.hwbot.org/submission/2323855_ Edited October 29, 201212 yr by oc_windforce
May 12, 201312 yr So I grabbed a few 3570K's and all of them show up as E1/L1 stepping under cpuz 1.64 The MPower will not allow me to change multi, the latest bios I have is E7751IMS v17.7, anyone have a newer bios that will allow the multi to change?
May 12, 201312 yr So I grabbed a few 3570K's and all of them show up as E1/L1 stepping under cpuz 1.64 The MPower will not allow me to change multi, the latest bios I have is E7751IMS v17.7, anyone have a newer bios that will allow the multi to change? If all else fails, use 17.6.
May 12, 201312 yr If all else fails, use 17.6. link to try? http://us.msi.com/product/mb/Z77-MPOWER.html#/?div=BIOS I assume you mean this 17.6? Edited May 12, 201312 yr by l0ud_sil3nc3 found link
May 12, 201312 yr link to try? http://us.msi.com/product/mb/Z77-MPOWER.html#/?div=BIOS I assume you mean this 17.6? yessir, I don't have access to bios files here http://www.msi.com/product/mb/Z77-MPOWER.html#/?div=BIOS
May 12, 201312 yr Crew I got a few betas here Loud (H82 dates from end of march), but can't test it with 3570K... H81 beta here : https://dl.dropboxusercontent.com/u/66364457/MSI/MPOWER/E7751IMS.H81.rar H82 beta here : https://dl.dropboxusercontent.com/u/66364457/MSI/MPOWER/E7751IMS.H82.rar Was mainly to improve RAM compatibility, too bad Samsung support went downhill... always flash with ME included ! We had most succes with 17.6 indeed, don't try to push the rams too high (PSC and BBSE), with some rams the board is more stable with 4 dimms then two Edited May 12, 201312 yr by Leeghoofd
May 12, 201312 yr I got a beta here Loud, but can't test it with 3570K... H81 beta here : https://dl.dropboxusercontent.com/u/66364457/MSI/MPOWER/E7751IMS.H81.rar Was mainly to improve RAM compatibility, too bad Samsung support went downhill... always flash with ME included ! Beardman to the rescue! When can I hug you Alby?
May 12, 201312 yr I got a few betas here Loud (H82 dates from end of march), but can't test it with 3570K... H81 beta here : https://dl.dropboxusercontent.com/u/66364457/MSI/MPOWER/E7751IMS.H81.rar H82 beta here : https://dl.dropboxusercontent.com/u/66364457/MSI/MPOWER/E7751IMS.H82.rar Was mainly to improve RAM compatibility, too bad Samsung support went downhill... always flash with ME included ! You are a lifesaver, testing now:)
May 12, 201312 yr Crew Beardman to the rescue! When can I hug you Alby? At TP101 3rd of June in the dark room, wear something kinky You are a lifesaver, testing now:) Can't warrant anything mate, will check if there's something new under the sun tomorrow Loud...
May 12, 201312 yr Wow nothing with 82, about to try 81 I am about to throw this turd in the Asrock and see what happens, as my friend that is binning the other chips say they work fine on the MVG.
May 12, 201312 yr Crew you tried the other Bios chip ? seems one bios is corrupt Edited May 12, 201312 yr by Leeghoofd
May 12, 201312 yr you tried the other Bios chip ? seems one bios is corrupt The other bios chip hangs on Entering Setup:( So much fail tonight lol
May 12, 201312 yr 2400 c8 RipjawZ PSC, first bios boots in, second is hanging on Entering Setup. CMOS flash both times and it is still hanging. Weird.
May 12, 201312 yr Crew You got any samsung or hynix based dimms to try ? does it also hang without any drives attached too it ?
May 12, 201312 yr Removing ssd and swapping memory on second bios chip (B) results in a hang after pressing delete to enter UEFI. Btw bclk changes no problem, multi is just not setting on bios A with the beta you linked.
May 12, 201312 yr hmm where is this on the board, black button next to the bios switch that says SW1?
May 12, 201312 yr it is not reset bios it is direct BIOS boot bios reset is jbat1 just below the battery
May 12, 201312 yr power technology must be "custom" otherwise you can not oc with multi the motherboard works fine with the new E1/L1 CPUs http://hwbot.org/submission/2379291
May 12, 201312 yr it is not reset biosit is direct BIOS boot bios reset is jbat1 just below the battery Direct BIOS boot button just does not work, will change power options to Custom, as I have been disabling it. Thanks zzolio, will post back shortly. It was power options set to Custom indeed, everything working fine now. Edited May 12, 201312 yr by l0ud_sil3nc3
May 12, 201312 yr feeling out the Mpower, turns out bios B is corrupted but A is working fine. Thanks Albrecht & zzolio, board seems to be fine until I try to go 2600+ on PSC, any tips for that? the above run was with tWCL 6
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.