Massman Posted October 29, 2010 Author Share Posted October 29, 2010 Hypers worked perfectly here. One thing I always do with the MSI is allow the board to set the subtimings as it wishes to do. So, whenever I start testing from scratch, I do this: - clear cmos - boot into bios - F10 without setting anything - reboot into bios - disable all features I don't need (not yet adjusting in cell menu) - F10 (save and quit) - reboot into bios and start adjusting the settings No idea if that would help? Quote Link to comment Share on other sites More sharing options...
Don_Corleone- Posted October 29, 2010 Share Posted October 29, 2010 Tested several boards? Tested several CPUs? Yep 3boards including 2rev 1.0 and a 1.1 with bioses from 1.0(and beta versions) up to 1.4.6 And 5 different batch 980X but no ES... 2Memory Set including STT 2000c7 and 2200c8 kits Can you test with a retail chip PJ? :confused: Quote Link to comment Share on other sites More sharing options...
Massman Posted October 29, 2010 Author Share Posted October 29, 2010 No retail 980X in the house here. I don't really see how that could be the issue, though. Quote Link to comment Share on other sites More sharing options...
Don_Corleone- Posted October 29, 2010 Share Posted October 29, 2010 No retail 980X in the house here. I don't really see how that could be the issue, though. So the STT memory is the case? Trinergy , Fuzion and GD80 does not have a similar problem. 890FXA-GD70 have a bad write performance too but not as bad as xpower. Quote Link to comment Share on other sites More sharing options...
Massman Posted October 29, 2010 Author Share Posted October 29, 2010 do you have the bad write performance at any clock frequency? even below DDR3-2000? Can someone dump the STT spd here? Quote Link to comment Share on other sites More sharing options...
Don_Corleone- Posted October 29, 2010 Share Posted October 29, 2010 (edited) http://hwbot.org/community/submission/1049621_ Above test done with that STT modules on BBFuzion The same setting scores 1300 with XPower due to extremely bad Write performance. edit : Memory freqs like 1600 gives write score of 8K. write performances improves with higher freqs and better timings but still poor. Edited October 29, 2010 by Don_Corleone- Quote Link to comment Share on other sites More sharing options...
Massman Posted October 29, 2010 Author Share Posted October 29, 2010 Very weird. Post SPD file here, maybe MSI R&D can have a look at it. Quote Link to comment Share on other sites More sharing options...
Massman Posted October 29, 2010 Author Share Posted October 29, 2010 Pieter can you try with your PSC? thanks... Bios 1.4b6 isn't the easiest one it seems. Took me quite some time to get it running ... Result is quite okay without copy-waza and for 3x1GB Quote Link to comment Share on other sites More sharing options...
Splave Posted October 29, 2010 Share Posted October 29, 2010 Interesting Im using stt too hmm Quote Link to comment Share on other sites More sharing options...
Splave Posted October 29, 2010 Share Posted October 29, 2010 is there a bios that allows rtl adjustments? Quote Link to comment Share on other sites More sharing options...
Massman Posted October 29, 2010 Author Share Posted October 29, 2010 They all do from 1.0B31 forward. Quote Link to comment Share on other sites More sharing options...
Splave Posted October 30, 2010 Share Posted October 30, 2010 I cant seem to find the option, maybe im just too n00b for this board Quote Link to comment Share on other sites More sharing options...
Don_Corleone- Posted October 30, 2010 Share Posted October 30, 2010 Interesting Im using stt too hmm Did you have such problem splave? Quote Link to comment Share on other sites More sharing options...
Splave Posted October 30, 2010 Share Posted October 30, 2010 memory type issues, do yours run over 1850 cas 7 okay? Quote Link to comment Share on other sites More sharing options...
Splave Posted November 2, 2010 Share Posted November 2, 2010 bought another board and some different memory will see if anything changes Quote Link to comment Share on other sites More sharing options...
Splave Posted November 9, 2010 Share Posted November 9, 2010 goodluck to people clocking hypers on this board lol! Quote Link to comment Share on other sites More sharing options...
Massman Posted November 9, 2010 Author Share Posted November 9, 2010 Could you please post SPD of the incompatible memory? Quote Link to comment Share on other sites More sharing options...
Massman Posted November 11, 2010 Author Share Posted November 11, 2010 Dumping an SPD can be done using the Taiphoon Burner app: http://www.softnology.biz/ Quote Link to comment Share on other sites More sharing options...
Splave Posted November 11, 2010 Share Posted November 11, 2010 sure mass, ive been using BDBG 6-9-6 1700 seems to be max 2050 does 8-10-8 on air cooling. Interesting thing is I saved the profile with my BDBG then booted with my hypers and loaded proile and they booted 7-7-6-19-60 2000mhz which wouldnt work before (not 32m stable but 1850 wouldnt boot before) Something def fishy. Will post up tonight. Quote Link to comment Share on other sites More sharing options...
Massman Posted November 11, 2010 Author Share Posted November 11, 2010 That's how incompatible SPD would show Quote Link to comment Share on other sites More sharing options...
Splave Posted November 11, 2010 Share Posted November 11, 2010 is there a way to flash my supertalents to your corsair profile? Quote Link to comment Share on other sites More sharing options...
Massman Posted November 11, 2010 Author Share Posted November 11, 2010 Yes. I'll post a dump of the GTX2 SPDs here in a couple of minutes (perhaps 1h). Quote Link to comment Share on other sites More sharing options...
Splave Posted November 11, 2010 Share Posted November 11, 2010 thankyou! Quote Link to comment Share on other sites More sharing options...
Massman Posted November 11, 2010 Author Share Posted November 11, 2010 In the meantime, please throw me your dump. (hmm) Quote Link to comment Share on other sites More sharing options...
Splave Posted November 11, 2010 Share Posted November 11, 2010 hahaha, will do tonight when I get home from work Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.