[GF]Duke Posted July 30, 2010 Share Posted July 30, 2010 So should the ocp hard mods still be done? Unfortunately no one has posted results for this or the results are vague. I want to try it but i'd reallly like to see some positive results. Anyone? Or will i have to be the guenia pig. Quote Link to comment Share on other sites More sharing options...
Massman Posted July 30, 2010 Share Posted July 30, 2010 http://hwbot.org/community/submission/1033340_pt1t_3dmark_vantage___performance_geforce_gtx_480_33838_marks - Hipro5 bios #1 - Kinc's modifications Quote Link to comment Share on other sites More sharing options...
Hazzan Posted July 30, 2010 Share Posted July 30, 2010 http://hwbot.org/community/submission/1033340_pt1t_3dmark_vantage___performance_geforce_gtx_480_33838_marks - Hipro5 bios #1 - Kinc's modifications awesome ...how much VGPU run with that core ? Quote Link to comment Share on other sites More sharing options...
Massman Posted July 30, 2010 Share Posted July 30, 2010 1.3V in afterburner IIRC Quote Link to comment Share on other sites More sharing options...
Viss Posted August 3, 2010 Share Posted August 3, 2010 1250 is good, strong card. Flashed the chillocp but it doesnt do anything, ocp at exact same settings as before unfortunately. Quote Link to comment Share on other sites More sharing options...
Don_Corleone- Posted August 3, 2010 Share Posted August 3, 2010 I've flashed chil8266 but voltage adjustment via afterburner disabled. Also i experienced some strange artifacts in 03 GT2. Any idea? Quote Link to comment Share on other sites More sharing options...
BenchZowner Posted August 3, 2010 Author Share Posted August 3, 2010 I don't think the chl8266 firmware has anything to do with the artifacts. For the rest I'll have to test them on another GTX480 as soon as possible and come back to you. Quote Link to comment Share on other sites More sharing options...
Hazzan Posted August 6, 2010 Share Posted August 6, 2010 1250 is good, strong card. Flashed the chillocp but it doesnt do anything, ocp at exact same settings as before unfortunately. so far I try OCP not wokring if you just flash chillocp...so we must still remove some resistor on PCB....I remove resistor and flash chilocp working perfect my friend Uploaded with ImageShack.us Quote Link to comment Share on other sites More sharing options...
[GF]Duke Posted August 6, 2010 Share Posted August 6, 2010 I concur. Kinks mod and Benchzowner Chilflash mod together work perfectly for me. 1.45 gpu no problem. CBB = problem now. I shorted out that resistor twice nw and still i have CBB. Quote Link to comment Share on other sites More sharing options...
BenchZowner Posted August 6, 2010 Author Share Posted August 6, 2010 Try this alternative mod for the CBB issue guys: [ obviously, you have to undo the original CBB mod shown by Kinc ] Quote Link to comment Share on other sites More sharing options...
[GF]Duke Posted August 7, 2010 Share Posted August 7, 2010 Thanks BenchZowner i'll give that a shot. Unfortunately no juice until Thurs. But i will def report back. Quote Link to comment Share on other sites More sharing options...
Linuxfan Posted August 7, 2010 Share Posted August 7, 2010 Try this alternative mod for the CBB issue guys: [ obviously, you have to undo the original CBB mod shown by Kinc ] BZ, You solder a wire between these right? Thanks! Quote Link to comment Share on other sites More sharing options...
e-Killer Posted August 7, 2010 Share Posted August 7, 2010 BZ, You solder a wire between these right?Thanks! no he used Paint for make that green line. i think yes only solder a wire, i gonna test this in couple hours Quote Link to comment Share on other sites More sharing options...
BenchZowner Posted August 7, 2010 Author Share Posted August 7, 2010 Yes, just use a wire to connect those two legs ( pins ) Quote Link to comment Share on other sites More sharing options...
[GF]Duke Posted August 14, 2010 Share Posted August 14, 2010 hey BZ i tried that new CBB mod and it was a no go for me. I think this is just one stubborn mofo bitch of a card. Quote Link to comment Share on other sites More sharing options...
Linuxfan Posted August 14, 2010 Share Posted August 14, 2010 Duke;67096']hey BZ i tried that new CBB mod and it was a no go for me. I think this is just one stubborn mofo bitch of a card. Sorry to hear wonder why? Quote Link to comment Share on other sites More sharing options...
BenchZowner Posted August 14, 2010 Author Share Posted August 14, 2010 Duke;67096']hey BZ i tried that new CBB mod and it was a no go for me. I think this is just one stubborn mofo bitch of a card. Leave the alternative CBB mod as is ( I mean done' date=' connected ) and do an additional mod. Connect a 10kOhm VR set at 10kOhm between the SMD capacitor and the left empty solder pad on the right as shown in the following pic [img']http://www.abload.de/img/gtx480_alt_add_cbbr7gm.jpg[/img] Hope this one will help you Quote Link to comment Share on other sites More sharing options...
[GF]Duke Posted August 15, 2010 Share Posted August 15, 2010 (edited) I'll try anything at this point lol Thank you. BB with results. Well i was having problems with the cards bios loading at the end of my session yesterday. The R3E kept hanging at "Loading VGA Bios". Thats when i ended the session. So i figured i'd pop it in this am to make sure it would boot before i did anymore work on it and it boots but my destop is all artifact's. I think i killed this one. I guess i'll have to go for my 5th card today. F....k me. Edited August 15, 2010 by [GF]Duke Quote Link to comment Share on other sites More sharing options...
unityofsaints Posted August 10, 2017 Share Posted August 10, 2017 Does anyone have copies of the files mentioned in the OP? Predictably, the links don't work anymore now. Thanks in advance! Quote Link to comment Share on other sites More sharing options...
basco Posted December 26, 2017 Share Posted December 26, 2017 late but here you are: https://www.dropbox.com/s/d8zu66zdk6yw36t/gtx480.zip?dl=0 i think i have all the stuff from benchzone for gtx 480 but i have to look for it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.