Steven86 Posted April 3, 2013 Share Posted April 3, 2013 After popping in this GFX card, this little black resistor/transistor, whatever this should be, caught a little flame ending up in no screen and a sound.. I cleaned the space around it, popped it back in-->fans are spinning, my mainboard doesn't give any error, yet no screen. Now I have death 470gtx on it's way, would it be worthwhile or should I try to replace this cap? Or are chances slim to zero of getting this card back up and running? Thanx! Quote Link to comment Share on other sites More sharing options...
Splave Posted April 3, 2013 Share Posted April 3, 2013 I think you are better off retiring it, then spending money on the parts to fix it and maybe not fixing it still Quote Link to comment Share on other sites More sharing options...
Steven86 Posted April 3, 2013 Author Share Posted April 3, 2013 I think you are better off retiring it, then spending money on the parts to fix it and maybe not fixing it still I was thinking the same to be honest, however I saw people doing the craziest shit before with the power circuit so I thought why not try it (simply cause it died before I could even say hello to it lol ) Quote Link to comment Share on other sites More sharing options...
xxbassplayerxx Posted April 3, 2013 Share Posted April 3, 2013 Zombie! Or as the Brazilians say: Zoombie! Quote Link to comment Share on other sites More sharing options...
Steven86 Posted April 3, 2013 Author Share Posted April 3, 2013 haha Quote Link to comment Share on other sites More sharing options...
Xtreme Addict Posted April 3, 2013 Share Posted April 3, 2013 You have burnt mosfet and now it makes a short. You can remove it and maybe GPU will start to work. If PCB didn't melt (traces inside PCB) and nothing more died, there is a chance you can replace it, but if you don't even know what the part is called, I think you don't have soldering skills or tools to do it Quote Link to comment Share on other sites More sharing options...
Bobnova Posted April 3, 2013 Share Posted April 3, 2013 Removing it'll be a good trick, but it's doable. At that point you can swap a new one in (also a decent trick), and it'll either work great or explode promptly. Quote Link to comment Share on other sites More sharing options...
Steven86 Posted April 4, 2013 Author Share Posted April 4, 2013 You have burnt mosfet and now it makes a short. You can remove it and maybe GPU will start to work. If PCB didn't melt (traces inside PCB) and nothing more died, there is a chance you can replace it, but if you don't even know what the part is called, I think you don't have soldering skills or tools to do it My previous job 7 years ago was soldering smd , leds, resistors..with a decent weller station soldering should not be any problem. Getting the right component probably will be the thoughest job. And mosfet lol yes word didn't cross my mind. Thnx for the input, will use this info and see what I can do. Report later.. Quote Link to comment Share on other sites More sharing options...
xxbassplayerxx Posted April 4, 2013 Share Posted April 4, 2013 You're going to want a hot air station because mosfets have a large ground pad in the center that you're not going to be able to reach with an iron. Quote Link to comment Share on other sites More sharing options...
Xtreme Addict Posted April 4, 2013 Share Posted April 4, 2013 My previous job 7 years ago was soldering smd , leds, resistors..with a decent weller station soldering should not be any problem. Getting the right component probably will be the thoughest job. And mosfet lol yes word didn't cross my mind. Thnx for the input, will use this info and see what I can do. Report later.. haha you made my day good luck with repairing gpu Quote Link to comment Share on other sites More sharing options...
Steven86 Posted April 4, 2013 Author Share Posted April 4, 2013 haha you made my day good luck with repairing gpu I know back in those X800 en geforce 6800 days a power issue or flame would kill the core...So I think I need more then luck Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.