Elmor's Lab

Some more info about the unlocking. What you need to know is that it's just a simple BIOS update and that it's experimental = not suited for 24/7 use. For example any power management will not work using this method. XTU is also screwed up when using this, with scores around 200 points. BIOS for different boards will be released at a later stage when they are more fine-tuned. Air cooled 4.7GHz Core i3 6300 on Maximus VIII Gene CPU-Z VALIDATOR Air cooled 4.8GHz Core i5 6400 on Z170-A CPU-Z VALIDATOR LN2 6GHz Core i3 6300 on Maximus VIII Gene CPU-Z VALIDATOR edit: Air cooled straight boot 400MHz base clock on Maximus VIII Extreme CPU-Z…

hey, I have an Asus R9 390X DCUII that I'm prepping to take cold. I'd like to use the hotwire points for voltage control, but I've been unable to find any mod guides. There's a couple pads right next to the points, so that seems obvious, but after looking at other guides there's also usually a resistor or two that needs to be removed? Any volt, bios, or other mods or tips would be appreciated Thanks

hi , guys these is my problem ,i used the card for several benchs with stock voltagem and clocks. the gpu shows image on boot ,but when arrives too desktop ,it crashes and reboot´s my pc . i´m wondering if flash another bios it will resolve the problem. please video https://youtu.be/sAittiks5gs Thank you

WARNING: This may cause your system not to start. Use at your own risk. The below procedure allows you to flash an older BIOS on motherboards without USB BIOS Flashback feature. The lack of this feature means there's no simple way to recover if things go wrong. Software required UEFITool v0.21.5 Thread Mega Intel Flash Programming Tool for ME 11.0 Hwbot (note that you need to unzip using a software which supports RAR5) Prepare the BIOS file for use with FPT Get the BIOS for your motherboard in CAP format (in this case MAXIMUS-VIII-IMPACT-ASUS-0019.CAP) Open the CAP file in UEFITool Export to ROM (MAXIMUS-VIII-IMPACT-ASUS-0019.ROM) …

Main features * Single 8-phase output * Output voltage 0-2.5V * Output current up to 500A * On-board voltage control/monitoring * 6x Hotwire connectors for auxillary VRM's * Firmware upgradable Current functionality (FW v0002) * Output voltage setting/monitoring * Output voltage offset switches (+0.4V, +0.3V, +0.2V, +0.1V) * Safety switch (limits output voltage to maximum 1.4V) * Output current monitoring * VRM temperature monitoring * Load-line calibration (0%, 60%, 80%, 100%) * Hotwire setting/monitoring Upcoming features * Profiles (save/load) * Auxillary output voltage sense This is still an experimental project and a few test samples hav…

Seems this knowledge got lost between generations, a lot of people have been asking me about the "special 980 Ti XP driver". It's really as simple as adding the device ID of 980 Ti (17C8h) in nv4_dispi.inf the most current XP driver for say original GTX Titan. See example inf files here https://copy.com/uHw7us1P7jQZLyuK (353.62) Latest drivers as of writing 361.75 http://www.nvidia.com/download/driverResults.aspx/97762/en-us (32bit) http://www.nvidia.com/download/driverResults.aspx/97763/en-us (64bit)

Enjoy https://www.copy.com/s/Y7wZVGv9mk31M3fx

Thought you guys might like this experimental software for maxing out your X99 platform, it allows you to change the ratio for each core individually. Only for ASUS R5E, other ASUS X99 should work in theory but not tested. To fully utilize this function you need to use it along with TurboV Core. When first started it will ask you "Init per core mode?", entering "y" will apply the current max ratio to each core. After that you use TurboV Core only to set your maximum possible ratio. If you want you can just set it to 80 and forget about it until next reboot. Whatever ratio you set in this software will now be applied on a per core basis. The software shoul…

3D only bioses https://www.mediafire.com/?jbqwtjjctv19aq7 GPU Tweak https://www.mediafire.com/?a9o0ybdvtlxdtty Post your results here, share your findings or let us know if you have issues.