MetalRacer

I have a hardly used Little Devil unit I bought new in March if you are interested. LD PC-V2 115V Phase Change - Black XL Suction Line - LD Cooling Computer Cases

Trash!

Trash!

Appreciate the help a bunch. Big Thanks,

Anyone have a copy of this unofficial evbot firmware that allows for higher than 1.3v on the GTX580 Classy.

Thanks!

You are on fire!

Hooked up the 5960x to the LD and did some quick benches. http://img.techpowerup.org/170325/capture782.jpg

It screws up the point spread and makes it difficult to strategize.

I think so. This LD is actually bigger than the one I previously had. I might just hook it up to the 5960x and see how it does.

looking good!

The one I was using for those screen shots died so I just got a new Little Devil last week and it is super nice.

I noticed you are also looking for an SS unit. I ran mine on an SS unit for a good while and 5.0 with 5000 cache wasn't hard. http://img.techpowerup.org/170320/capture026.jpg http://img.techpowerup.org/170320/capture005x.jpg http://img.techpowerup.org/170320/capture007x.jpg http://img.techpowerup.org/170320/capture029.jpg http://img.techpowerup.org/170320/capture033.jpg

Just tried them and one stick works but the other one doesn't. Sad they can't do a better job testing them considering the $$.

Just installed a new set of G.Skill F4-4266C19D-16GTZSW and it keeps hanging on codes 55, CC, 01. Board works fine with these other kits. F4-3200C14D-16GTZ & F4-4000C19D-8GVK. Using BIOS 0701.

I have one in my daily driver I run at 4.6 with 1.225v and have run it at 4.8 with 1.35. Does 5.7 on ln2. I'm only running a single Swiftech MCR320-QP rad so I've never pushed it hard on water. http://img.techpowerup.org/170316/capture1438.jpg MetalRacer`s Ryzen Blender score: 28.37 with a Core i7 5960X MetalRacer`s wPrime - 1024m score: 1min 3sec 308ms with a Core i7 5960X

Well done!

That was it! The VCC PLL Voltage setting was the problem. Big Thanks!!!

You might try Fredayama's 2x8 B die 3866 preset and then work your way up.

I did try uninstalling and reinstalling on Win7, Win10 and XP64 but had no luck. I first encountered the problem when I enable ln2 mode and it persists even with ln2 mode disabled. I should mention this is with the full size OC Formula.

Any ideas why a previously working AFD would suddenly start freezing anytime I hit apply regardless if any settings were changed or not?

Very interesting! Please keep us updated with your results.

Nice 1!