Splave

same here -115cb but mem goes just shy of 1900 somethings strange though with my card, I loose screen and bench continues like 7970 lol anyone else? @ 1.6v 1880/1880 seems to be about it for 11...cpu only at 5ghz so could be a bit lower max but not bad...sucks to be around -100c though

smart move on their part, this should make things way easier now to try and convince them to let us keep the tool

damn Im only there from the 27th - the 1st you guys are making me jealous

after a couple 12 hour days on the board starting to get used to some quirks and learning to adapt to them. competition bios seems like the best so far which is nice. goodnight big bang II, see you in the morning friend. let me know if you need any extra blankets.

Matose try this mod should help, solved all my problems Be advised, it did not work when the yellow was at the bottom position just so you know.

maybe bent pin or bad board EDIT: Testing c2 right now, hopefully solves all my problems

I use to hang them on my wall in the garage, 2 nails that hold the card on the case bracket. but then sold them :I Or on the ground in the corner of the garage

I get that error when trying 4gb Dimms in anything other then single channel. Is this with 4gb dimms?

I think that they should provide each contestant with the Chil tool to control voltage and be done with no problem

thanks fester So for me current issues are CPU must be at x45 or lower to cold boot or will get 9A -Must boot x45 or less first for the hard reset...then bump to x50 and is stable until power down. -If power is cut, will get 9A hang Control Center II on every bios chip asks for a reset to apply settings.

under water atm, will try chilled but I think its the c1 messing up (hoping)

Im very behind on the gpu, so you use this new bios + the hardmod? gives you 1.4vid default then you force p0 state and raise voltage with AB but currently only 1.6*v max?

yeah thats 2333 is at 125bclk, any thoughts on the control center problems? PSC 2400 divider = b4 Corsair hynix 2666 cas11 2400 divider = b3 kingston genesis Cold boot 2333 profile (that passes 32m) = 9A ordered a c2 3930k to rule that out shiot is getting expensive!

rofl

1x kingpin tek 9

new bios memory still stuck under 2400 divider b4 code, sometimes 9A tried just about everything still max 2333mhz but will run tight so I dont think its the imc... I thought it was 2t vs 1t but it isnt.......maybe its my c1 chip by chance.....? you can boot 2400 100bclk no problem?

V1.4 was better. V1.3 is great except the control center needing a restart

You hurt my feelings

Fgured out my mem issue $5usd for each person that wants answer

I do, seriously

At final you always get 2 My results so far

Yep, its actually CL7 but still looks cool lol

please change mine to Manmass

I enabled adjust in windows but I have power technology disabled, maybe should be custom?

Im running the kingston genesis 4x2gb kit, 9A or 63/67 if I try to boot 2400...maybe its a 1.3bios issue will try 1.4 today again. Any ideas why Control Center II is telling me to restart before the settings will take place mass? REALLLY appreciate your help with all this man, its been crazy trying to get this board to run and any feedback Ive sent to the motherboard dude there has been no response. (Probably because his inbox is full)