Calathea

It should be really good for 3d06 right. I'm a bit curious how much better than my chip it is too 6 GHz cinebench here. But I think you should take it easy with high load maybe, no need to risk degrading/killing the chip, the greatest use of this chip should be in 3d01, 03 etc. Have you ran any spi 32m?

Well deserved, now treat it with care. Do you know how well it handles multi core load?

good work, fast for the clocks.

4670K: L311B286 @ 5GHz, 1.45v 2C/2T = SPi32M not that bad, my 6 GHZ 1.6 vcore cinebench 4670k needed 1.42 volt for 5 Ghz 32m air. Just wanted to say that. If it can do over 4800 uncore air it's probably above average, especially with that batch. :celebration:

wow, very efficient

Benchbros, I don't get it. Why only run -50 to -70?

Honestly the cpu doesn't scale with much more volt. I think it's a low leakage cpu. Coldbug is at -120, I started at -115, pulled down to -125 and let it warm up to about -118 at the end. Then some heatgun to prevent cold bug. Btw, max pi 1M is 6300 MHz 1.65 Vcore.

Thanks It's good for high load situations, might be good base for 3d-bench system on single stage cooler. I think I have 10+ graphics cards waiting for better times.

Guys, what's the deal with these cpus doing all cores stable high clock, low volt but not even making 1M at 6,3? My 4670k is very similar to Bullshooters cpu, I actually had it stable in XTU over 5,7 GHz but max 1M is 6,22 GHz @ 1.66 Vcore Is it just low leakage, non scaling?

I remember this. For what you've payed for it, you should demand an answer from the seller.

Blargh, that L316B316 4770k was bad 6,2 1M but at 1.85 vcore.

Thank you. I have printed it and have it with me to the store lol

Most impressive. 32m like a baws.

Wow what a chip Splave. My 4670k No scaling sadly, ran pifast/pi at 1.66 vcore -120 Celsius and ~6,2 GHz is max. 4770k tomorrow!

awesome work.

yup two L311B359 was the same. Very small line between fully stable and just cpuz valid. On a side note, I seem to have gotten addicted to this thread

Will do guys, today also this 4770k which was actually 1.435 vcore 5 GHz. Not as good as the 4670k at 4,5 Ghz though.

So what do you think, still a crap cpu even with low volt @ 4,5? Wprime 1024M ok at 1.125 4,5 GHz 4c/4t.

3 new 4670k here. L312B549 L312B549 #1 1.2+ volt for 4500 MHz Spi32M, no 5 GHz L312B549 #2 1.175 volt for 4500 MHz Spi32M, no 5 GHz L312B549 #3 1.11 volt for 4500 MHz Spi32M, 1.42 for 5 GHz. Was expecting more from the third, 1.11 v @ 4,5 GHz is the best one for me so far but it hits a voltage wall at around 4,9.

sorry didn't mean to be disrespectful See you got a better result now. 5,5 seemed a bit low.

ln2?

When you say boot at 5 GHz, do you mean 4c/8t? I thinks it's quite a lot easier to boot 2c/2t like most of us bin cpus.

Very nice. Proves that not all good cpus needs to be 1.25 volt 32m

Is this your 1.38 volt 32m chip?

Good luck!