Jump to content
HWBOT Community Forums

aussie-revhead

Members
  • Posts

    95
  • Joined

  • Last visited

Everything posted by aussie-revhead

  1. Thank you sir, can you link me to the correct bios? Is there a particular version I should be using?
  2. Hi guys, its been a while since I posted here and its a shame to come back only when I have problems but it is what it is and I need them fixed so I can get benching. So I have a 2 stage cascade, it has been sitting unused for 2 years or more, I took it out to try to keep my 9960x cool. Before I subjected my big cpu to that I thought it would be best to get it all working, test my insulation and sort out bugs with a smaller cheaper cpu, so I bought a 7800x and started testing. Longer story short I have the following weird issues: 1. The cpu does not do what I tell it to. I like setting a baseline and then test steps from there so I can see the incremental gains, if I set my multi to 50x then cpuz shows 5000 in windows and all is good. I set 51x, 52x and 53x and they are fine but 54x shows as 5300 in cpuz, if I reboot the multi setting is at 54 but the cpu speed at the top of the screen says 53x. If I try 56x, 57x or 58x they all show 5300 in windows and 53x in that top part of the screen. I tried everything I can find in bios (latest 124 bios), disabled EIST, speedstep but they made it worse (54x in bios was 3500 in windows ...). Has anyone seen an issue like this? Is there a hard limit in factory bios to limit the mhz? Do I need an XOC bios? 2. Ram issues - I am using g.skill Trident-z 4133 due to being b-die but this rig is not happy at all. I did my first wave of testing at default 2133, lucky I did because nearly everything higher than that causes no post and FF code. I did get it to bench at 2400 (yeah I know...) but that's it. I tried XMP, I tried more volts, I tried 3800, 3600 (with various and very loose timings), even 2600-17-19-19 will not post. I feel like I have had this issue before with another rig but I cant remember how I fixed it .... any ideas guys? 3. OCrobot failed - I don't need it but I tried it and it got to 9% and sat there, is that related to the above? 4. Profile save failed - I saved a baseline at 5ghz and when I loaded it I found it was blank. What are the chances that my test cpu is stuffed? I want to try the 9960x but I don't want to put it in danger either, so I would rather rectify the issues if I can, then try the bigger cpu. Any help would be greatly appreciated. ? ?
  3. Have you tested stable volts for 5ghz?
  4. Actually Ozzie more like aud600 for shipping, I quoted it already. If shipping wasn't so dear I would have bought this ages ago.
  5. I'm not looking to push them hard either way, what price are you looking for?
  6. Thanks but which are 8gb hynix sticks?
  7. Guys, my z170 only seems to like Hynix rams, if you have a pair to sell please post up or PM me. Seller must be willing to ship to Australia. Cheers :nana:
  8. Thank you for your patience but I will withdraw it from a sale for now as it's back in testing with a Ti HOF.
  9. This CPU was purchased from here with high expectations and it delivered, it runs stable clocks as follows (yrmw): 4500 at 1.14v 4600 at 1.18v 4700 at 1.22v 4800 at 1.28v 4900 at 1.38v It loaded windows at 5ghz but heat is a big factor in stability, you might do better than me here, it's a J547 batch. I have the retail box and will post world wide at your cost. I paid usd760 for it (including shipping) and it's a very good cpu, sorry I don't have any cold results. I will get a pic up after work. Asking reserve USD640 or 540 euro (I hope I got my conversions right). The only trade I need right now is a 7820x or higher that can do 5ghz on water at 1.3v or less. All offers to be plus post please. I will consider bids below reserve and I will close within a day of reserve being met. Pm or post any questions. Just confirming I will add a pic when I get home from work. I reserve the right to remove the listing as I have it listed elsewhere also. Good luck and happy bidding. :celebration:
  10. Awesome, can you quote shipping to Sydney Australia?
  11. Still looking for a gpu pot, I need it asap. :nana:
  12. OK I have a BartX cpu pot now, still looking for a gpu pot for dice, must fit 1080Ti
  13. Hi, how much to post the DDR4 to Sydney Australia?
  14. aussie-revhead

    7820x

    Guys, I see lots of you guys playing with these CPUs but the first shipment still hasn't hit Australia. If anyone has one that they have binned, finished with, found better etc please post up. I would prefer one that has been delidded.
  15. Im still interested but he hasnt been here for 3 weeks ...
  16. He has replied now, thank you
  17. How much to ship the pot to Sydney Australia?
  18. How much with shipping to Sydney Australia?
  19. Majkel hasnt been on here in 4 weeks, if anyone knows him could you please ask him to check his inbox? Thank you.
×
×
  • Create New...