RULE

I take #22

A lot of trouble today. Above 3600 1T is impossible for my geil 4000 c19 and is strange because with asus i can bootup easy at 3733. Try to push with 2t and 4000c13 is pretty easy. I notice the VCCSA voltage if leave in auto run high at 1,35v with new bios 1.93A. Is that normal with LN2 mode disable?

Can't wait anymore, tomorrow bigyellow is here, back from rma. I've my geil 4000c19 b-die to test.

push!

nice run Hideo-san, only 2t available for 4 dimm B-die?

bump

Nop, never run FS I'm without x99

Duo LN2 supply problem, i need to sell my beloved vga. -GTX980Ti KPE 77,8% ASIC QUALITY Insulated with LET PCB Heater solder and active With box and accessories, except t-shirts,poster and stickers Registered on EVGA website for warranty, invoice available 1560mhz aircooling 2000mhz LN2 I'm not realy a 3d guy so in good hands can do better stuff. Asking 1000€ shipped EU incl. paypal (send money to a friend) or banktrasnfer

Some porn timings with i3-6320: 3700/2.05v/-58°c Next multi was unstable, probably need cold also on the cpu.

Is not yet clear for me how many ticket need to buy. Workshop and OcGathering need 100€ ticket, oc world tour? 1. going 2. World Series+Overclocking gathering(if i came with car) 3. Train or car, need to consider cost/time travel. If i came with car i can bring 20lt dewar 4. no idea yet, hotel if i came with my GF 5. i can assist in OCWorkshop

I think this kit is E-Die

Thank you Hideo-San!

Bump

Hi people i'm here to sell a couple of extra cpu CPU#1 i5 6600K BATCH L542B436 VID 1.15V Delided and reclosed with Thermal Grizzly Kryonaut between 4,7ghz cpu stable with ROG Realbench 1h fixed frequency 1.425v (not tried lower) 4,8ghz Geekbench @ 1,425v (not tried lower) CPU#2 i5 6600K BATCH L542B424 VID 1.15V Delided and reclose with Thermal Grizzly Kryonaut between 4,9ghz cpu stable with ROG Realbench 1h fixed frequency 1.425v (not tried lower) 5.0ghz Geekbench @ 1,425v (not tried lower) Both cpu was teste with Raijinteck Triron AIO 360 with 50°C max temp. Price: CPU#1 - 300€ + shipping CPU#2 - 330€ + shipping Contact me for estimate shipping cost for your country. If you asking i can reopen the lid.

Is a huge conflict against stability and efficiency at some point. -58°c @ 2.00v 3600c11-11-11-28-1t and 3733c11-11-11-28-1t is easy on cold with 2.00v but less efficient.

Mine B-die scalinge @-58°c until 2.0v @l0ud_sil3nc3 have you found CB? I can't wait any longer the lil board...need one

Yes but is all in french languages! I've some questions: -how many ticket need to buy? 1 for hwbot world tour (80€) and 1 for OC gathering (100€)? -which hardware will be use for world tour extreme competition? who provide it?

Quick run just befor Christmas lunch. CPU@AIO - RAM@SS -58°c 2,0v Good news, there's no CB until -58°c. But is hard found stability, need more time and cpu with better cooling.

Easy to find in EU, try google https://www.google.com/search?q=GWW416GB4000C19DC&oq=GWW416GB4000C19DC&aqs=chrome..69i57j69i61&sourceid=chrome&es_sm=93&ie=UTF-8

I'm curios with 4 dimm will be crazy efficient in XTU, but 700€ is a lot of money.

Hi all, just the other day after team.au aquamark submission i've discovered the existing of samsunb-b die. Searching in EU shop i've found a kit with not much information on the web, Geil Dragon PC4-32000 4000 cl19-25-25-45 1.4v 2x8GB KIT (GWW416GB4000C19DC). Even on Geil official website there's nothing about this kit, but since all the DDR4 Dragon I've seen was single side and this kit was 2x8GB i've try to purchase with the hope to find Sumsung-b die. Lucky me it is. So i see the the Loud Silence 32M of yesterday on Z170M OCF, my Big Yellow is on the way home after RMA, the MOCF is not available yet in EU, so i've run some XTU on Asus Z170 Gene. Nothing against Asus, i just prefer the Yellow Board. Starting from here @ 1,70v Here @ 1,80V Again @ 1,80v very thight 1900 @ 1,85v very thight There's more in this kit, tomorrow i'll try some cold.

Nice Man PUSH PUSH!

2V is for memory BTW is not the end:

Very strong result man, MFR powa! With Gene i can push my MFR to 3733 c11 but the efficiency sucks, i'm the only one with efficiency trouble on Asus?

I've already order Die-Mate from caseking but i'm waiting new supply arrive, so i decide to buy a 3d printed tool from an Italian shoop.... No need word just look the photo...