l0ud_sil3nc3

Is there no way to view timings used? Top Notch Dre:)

Maybe the contest that requires a yellow board:D I have binned a whole 2 kits of MFR. . . . on air . . . . DDR3 4200 here we come lol

ps I just listed all my class b hardware for sale, not doing the semi's as I have other things to prep for;)

So not doing MOA anymore and figured now would be the best time to sell all the gear. I have: MSI Mpower (with retail box and accessories) $150 shipped Intel 3570K batch #: 3251B377 which is the exact same as the 6.7 32M chip which is what I used in the first round and now has a wounded IMC. This was the backup cpu that clocked almost the same as the first one, albeit at a slightly lower voltage. Never tested on LN2, but 5Ghz air 32M requires 1.29v on MVG with tight memory timings. $500 shipped Intel 2600K x58 multi for 32M which I received from a teammate. http://hwbot.org/submission/2150693_zeneffect_superpi___32m_core_i7_2600k_5min_46sec_828ms Just got this in the other day and have not tested it 4c 8t , but I am sure 5.7+ should be easy with a good phase setup. CPU has no readable markings on IHS due to erosion from a certain TIM. $500 shipped And of course I have a unmodded MSI GTX560 TI 448 PE/OC which the cooler was removed from to verify what exact model it is. $185 shipped Prices for the cpus shipped are Express Mail via USPS so it should be a 1-3 day service anywhere in the world since I know time is of the essence, feel free to pm for any screens.

^Will test later tonight and see if this is possible on air.

dat dere bandwidth

l312b512

I use 2.2 vccin on air for 5Ghz runs and no issues, it is when you start doing 2.5+ cold or air, when things go crayola! I think a living, benchable 6.xxx cpu is better than a dead one while trying to max multi as I have wounded three doing this, no load. Will be retesting the twin to this cpu which has a lower vid, it has been sitting in the air rig for a minute lol.

^Without a doubt some of the best results given the dice temps, you are killing it man I am sure those sticks will fly on LN2, keep up the good work buddy:)

Not quite max, just safe (2.2 vccin) http://valid.canardpc.com/show_oc.php?id=2867602 I am sure there is more just need it stay alive and not die like all the others lol

So decided to freeze some Samsung as on air it absolutely kills most ic's and even though many believe cold doesn't bring much benefit, in my case I was able to go much further on LN2 than any of my air results. Tested a new cpu, which may be the best Hasfail I have seen in my hands, safe vccin and safe vcore as I would like to keep this one around for a while:p: Setup is the OG Inflection and Triple Point sitting on top of factory Trident X heat spreaders as it was more than enough for this ic. some 5Ghz 32m action: uploading video of the above atm, even though it is slightly above the limit in the screenshot. think this might be causing any issues:rofl: and finally. . . .

Well sort of. . . have a video of the above, but had to rerun due to it being 0.16mhz over, no biggie easy peasy

All done at -100c

^Very awesome for sure, glad to see the board is doing so well with PSC, will post cold Samsung results shortly.

Quick air update with some cold AC blowing on the other half of the 2400 c8 kit which is untested on cold. Delivering as promised:) l0ud_sil3nc3 - 5:59:843- 50x100.1 - 1300.8 MHz 7-12-7-28-88-1 - Mini OCF - G.Skill 2400 c8 PSC 1.96v all @ (cold) air

At the end of the session I decided to test this cpu with safe vccin (2.2v); L312B332 cb -128c cbb -96c 2c 2t valid is still on the drive and only required 1.65v. Some 4c 8t action:

this guide = winning!

epic sheee peee uuuu!

woooot! M6E is running well I see, great work man I knew that cpu was special and showed us just how epic it is.

Well same shit here, 55 on both the first dimm slots and now a wounded 6.7 cpu, so much fail MSI. I procured another board and the Siamese twin to the wounded cpu is going in the failpower, wish me luck

Bro you rock, just had 280l delivered this morning glad I procrastinated and will bench this today:)

just for you girl

I think tighter timings would help especially at lower frequencies, but as Dumo has stated tighter is not always faster. I could not get 3100 with those timings to pass, but the good thing about my kit is it seems to like voltage, 1.9 on air is fine so I am hoping they do well on cold. Hiwa is correct being single sided hurts the most, but I think if you could get 4 dimms (full bank) to run it would cancel out the single sided performance hit, but I am sure the IMC would have a tough time coping with full bank, decently high mhz and tight timings (can't believe I just said tight timings and MFR in the same sentence:p). Thinking about strapping the pot on these suckers but so much more PSC to bin atm.