l0ud_sil3nc3

Aquamark is a straight cpu/memory test, vga clocks mean little. I would run at least 4c 4t if possible and the highest cpu/memory clocks you can run. Freezing ram is a good idea for this one as well:)

Nice any cb/cbb issues?

dat Faildozer is strong!

^2.05 to 2.1 is fine for 5Ghz

Good start bass

XP for sure will check when I am back at the house and upload.

nailed it DJ

Troooolloool, so crever Sprave! Be sure to bring me back a cb/cbb free 7Ghz Haswell:D

Very nice indeed!

-112c

Very nice, what dimm?

The ME drivers I have allow me to change bclk in Windows with TurboV on the M6E.

5 should be good up to 2800 and is much faster than 6, but you are right is should gain a bit for higher mhz runs.

^ no the early valids for 7Ghz required 2.5vcore and 3.04 input, much higher than any retail can probably take.

I had to:D Congrats man that is a monster for sure.

Replacement chip is not so good, it needs about 1.34v for 5Ghz 32M.

Thanks for the link, but I can for sure tell you I set 2.9v for input voltage and 2.2v for vcore and cpuz reads vcore exactly as that. All voltages were adjusted in the OS with TurboV. The M6E has never read vcore differently than what is set in the bios, at least in the all the bios's I have tested.

Just getting warmed up over here;) No literally

L312B332 5Ghz 32M 4c 8t 1.28v dead stuck at post code 78. I have two more of the same batch with very close serials.

Retail, I would feel soooo bad killing Ryan's cpu, glad I decided to try the retail 4770K first, but 2.2 vcore and 2.9 input at -120c resulted in a reboot and constant post code 78 after that. Cache voltage (a.k.a. ring bus, uncore) was at 1.6v for 5000. I swapped cpu's and out today and see if I can take it a bit easier on this one as retail c0's are not able to handle high voltages it seems.

Be careful guys, they die pretty easy even under cold the first shee pee uuu is dead.

then you need single sided MFR:)

Who cares how high it goes, it is good for competive 32M benching on air, almost as fast as cold PSC.

Nabbed a few at a local Fry's they seemed to have an over abundance of stock, all Malay though not a single Costa.

lets get things started:) PSC Samsung MFR 4Ghz b0 is inferior to c0 prepping to go cold on the 4670K atm, should have results in a bit