l0ud_sil3nc3

^thanks Eeky me too:D

Winning Hideo-san!

in:)

Thanks Ryan, and the 230 has been empty for a few days:D Should have another tank here on Friday

$450 shipped for either cpu

Working on getting it for <0.50c a liter atm . . . and my cpu is not one of those, I tried vcore as high as 1.85v with input at 2.3v, 2.4v, 2.5v and 2.6v and no difference 32m would always fail, same with pifast and etc. . . I will retry it again as it is able to run 32m at 5Ghz at 1.15v for both core and uncore, so there has to be something I am missing as well.

Thanks PJ:)

So decided to start binning retail for the Asrock comp and figured it would be a good idea to use ram which has been tested thouroughly, i.e. more than one board with multiple cpu's. This kit always seemed to stop at 2600 and did not seem to like volts nor extreme cold. With this cpu, -133c is good for the memory and 2.15v is working great not to mention 2700+ is good, see below:yepp: Can't have it all though right, cb on this particular sample is -110c, playing with input voltages does nothing for max clocks or max pi stable clocks, such a disappointment, but it seems binning cb is the most important thing as -110c is not going to go nearly as far as -135c+. some pics:yepp: . . .and what I have been working so hard on, could not have done this without Splavebro's pushing/motivating/sharing, thanks dude:up: "66 = 55's" :rofl::ROTF::rofl::ROTF:

Nice tiborrr!

Is there no way to view timings used? Top Notch Dre:)

Maybe the contest that requires a yellow board:D I have binned a whole 2 kits of MFR. . . . on air . . . . DDR3 4200 here we come lol

ps I just listed all my class b hardware for sale, not doing the semi's as I have other things to prep for;)

So not doing MOA anymore and figured now would be the best time to sell all the gear. I have: MSI Mpower (with retail box and accessories) $150 shipped Intel 3570K batch #: 3251B377 which is the exact same as the 6.7 32M chip which is what I used in the first round and now has a wounded IMC. This was the backup cpu that clocked almost the same as the first one, albeit at a slightly lower voltage. Never tested on LN2, but 5Ghz air 32M requires 1.29v on MVG with tight memory timings. $500 shipped Intel 2600K x58 multi for 32M which I received from a teammate. http://hwbot.org/submission/2150693_zeneffect_superpi___32m_core_i7_2600k_5min_46sec_828ms Just got this in the other day and have not tested it 4c 8t , but I am sure 5.7+ should be easy with a good phase setup. CPU has no readable markings on IHS due to erosion from a certain TIM. $500 shipped And of course I have a unmodded MSI GTX560 TI 448 PE/OC which the cooler was removed from to verify what exact model it is. $185 shipped Prices for the cpus shipped are Express Mail via USPS so it should be a 1-3 day service anywhere in the world since I know time is of the essence, feel free to pm for any screens.

^Will test later tonight and see if this is possible on air.

dat dere bandwidth

l312b512

I use 2.2 vccin on air for 5Ghz runs and no issues, it is when you start doing 2.5+ cold or air, when things go crayola! I think a living, benchable 6.xxx cpu is better than a dead one while trying to max multi as I have wounded three doing this, no load. Will be retesting the twin to this cpu which has a lower vid, it has been sitting in the air rig for a minute lol.

^Without a doubt some of the best results given the dice temps, you are killing it man I am sure those sticks will fly on LN2, keep up the good work buddy:)

Not quite max, just safe (2.2 vccin) http://valid.canardpc.com/show_oc.php?id=2867602 I am sure there is more just need it stay alive and not die like all the others lol

So decided to freeze some Samsung as on air it absolutely kills most ic's and even though many believe cold doesn't bring much benefit, in my case I was able to go much further on LN2 than any of my air results. Tested a new cpu, which may be the best Hasfail I have seen in my hands, safe vccin and safe vcore as I would like to keep this one around for a while:p: Setup is the OG Inflection and Triple Point sitting on top of factory Trident X heat spreaders as it was more than enough for this ic. some 5Ghz 32m action: uploading video of the above atm, even though it is slightly above the limit in the screenshot. think this might be causing any issues:rofl: and finally. . . .

Well sort of. . . have a video of the above, but had to rerun due to it being 0.16mhz over, no biggie easy peasy

All done at -100c

^Very awesome for sure, glad to see the board is doing so well with PSC, will post cold Samsung results shortly.

Quick air update with some cold AC blowing on the other half of the 2400 c8 kit which is untested on cold. Delivering as promised:) l0ud_sil3nc3 - 5:59:843- 50x100.1 - 1300.8 MHz 7-12-7-28-88-1 - Mini OCF - G.Skill 2400 c8 PSC 1.96v all @ (cold) air