TASOS

That's exactly how i do it. But everytime i change the multi to 2600 , it stucks at C0 for a few seconds , then it shuts down and restarts in safe mode. I need to test with a different cpu , i cant think of anything else. Why CFR and samsung are so easy ... and PSC are so strict ?

ok , then. Do we have to report ALL of this guy's submissions ? http://hwbot.org/user/mtc/ or is there an automated self destruction routine for these ?

Thanks for the info. I have already used it. Still , the best i could do on PSC , was 2400 8-11-7-28 1T. I suspect that is caused , by the lack of straps. I'm on 100 only.

Do we have anykind of changes about current ES hardware usage ? I ask cause i wrote something in this thread http://forum.hwbot.org/showthread.php?p=317459#post317459 but , now i cant find the part in rules , where the ES is forbidden ... and i wonder if i made a mistake ?

Current generation of ES hardware is allowed to receive points ??? I thought it was forbidden.

Thank you. Do we have to download and install java also ?

I need a step by step guide for novice users , on how to run and submit results from an android device. Who can help ?

That's how i do it till now. I'm experimenting my settings on advanced manual mode. I still dont have the memory profiles available , even in F7a beta bios. I dont have a "k" cpu and i suspect that this is the reason why. For the same reason (i think) , i dont have all the straps available , so i'm kind of limited in options , untill the retail k series cpu hit the market.

Is there any chance , that the pre-set memory profiles are activated with certain cpu's ???

Reporting back. Updated bios to F7a beta. O/C buttons working +/- (both full steps and decimal) but the Gear button doesnt light-up when activated. Is that considered ok ?

That's the latest beta , right ? I've got to be very brave , to flash a beta bios posted Friday 13th !!! Thanks

For persons like me (aka "the retailers") There is nothing in classic mode There is nothing in uefi mode There might be something in ghostbuster mode , but i still havent found the combination keys to enable it.

There is not there.

Where can i find these ?

You cant drive a car without a steering wheel. The answer is yes.

Chaintech Zenith series 9CJS , eh ? Not good performers back then , though.

Should i also write here , about memory overclocking problems ? or should i write them in sin0822 o/c guide thread ??? Well , long story short , is that (at least my efforts) Hynix CFR clocks as expected Samsungs clock a bit lower than usual PSC is a disaster !!! I dont have any access to any of those ready-set memory profiles , so the results are based on my own limited knowledge.

Yes oc button is installed. There is no responce. They dont even light up , when pressed.

Ahhh. Also ... i forgot it earlier. The on-board switches for bclk and multi DONT work.

To keep this thread clear. http://forum.hwbot.org/showthread.php?t=107019

Gigabyte Z97X-SOC Force The good points Nice looking board ! Well equipped !! Theoretically very well build in terms of both hardware and software !!! But ... As a new product , there are some things that perhaps need minor adjustments ? or bios development ? I dont really now , that's why i opened this thread. I run into a few minor problems , and i'm looking for a solution. A. I cant operate the board with a pci vga card. A recent generation of a DX11 HD5450. The vga is a perfectly working card , tested on an other motherboard. Whenever i plug it in , an exclamation appears in device manager (pci to pci bridge) driver. The card doesnt accept any version of AMD drivers (new or old) to be installed. Tried re-installing system drivers , vga drivers , new windows7 os install ... nothing changed. Same result on both pci slot's. B. Tried an other (pci-e this time) HD4350. Tested and perfectly working vga. The system booted the 1st time as a standard vga and after installation of the proposed 13.9 AMD drivers ... BSOD all the way. Tried older version of drivers , nothing changed. Tried the first two pci-e slots. Now i'm working the board with an HD7870 with no problems. For the record , i had the same results-problems using bios version F5 , X04 , F6. Open to suggestions. /

He is on a reporting streak , with this benchmark. There are reported submissions all over the place.

This is an O/C guide and i'm looking for some answers about generic matters ? ... do we have a specific thread in this forum ? About SOC-FORCE model.

The above result is submitted in wrong category. That card sure is a pci-e version. There is NO sapphire 5450 pci , with 1GB ram. and sure doesnt look like a low profile pci card , in the photo. A result moderator must edit it. .

The problem still exist. The member of the month is ... nameless !!!