Kotori

Nice!

P5A was unable to clock change in DDS2, i don't know what cause. Iwill XA100plus was possible but board died before try max fsb.

What signals was necessary? Sorry, I don't know meaning of the question, where? which? So you soldered the output of DDS2 to the reference-clock-oscillator and it caused rising of PLL maximum frequency? Yes, For example http://hwbot.org/submission/3010261_kotori_cpu_frequency_pentium_3_celeron_mobile_500mhz_766.42_mhz PLL of this board ICS9248AF-61 maximum 100mhz By the way K7pro fsb is max 119mhz without mod Or could you explain what signals go where From DDS2 output to Mother board PLL(X1)

Not TubroPll, use DDS2 kit(Direct Digital Synthesizer2) http://akizukidenshi.com/catalog/g/gK-04594/ Sine wave output-only, 1hz~16.7mhz, 16.7mhzz~33.4mhz, depends on the Crystal, Operation at dip switch, TubroPLL doesn't sell now.

used an external PLL, 751chipset is possible up to 150mhz(need mod) but maybe impossible in this board.

My K6-3+ coldbug at -15℃

Nice!!

Very nice! congratulations new record!

Thanks, air cooled+3.8v io voltage. P5A doesn't boot in particular multipler and FSB combination, even if it's lower than cpu 720mhz.(my K6-2+ limite at 720)

Yes can't boot but may be possible if use other boards.

Hello GraduS-san, this time set to 2.4v, my chip don't like more higher voltage

Thank you very much

Please add mobile pentium 3 600mhz http://valid.x86.fr/xptuyy http://www.cpu-world.com/CPUs/Pentium-III/Intel-Mobile%20Pentium%20III%20600%20-%20KC80526GU600256.html Thank you

Everyone use for FPM ram overclock, good or bad i do not know.

Congrats Nikolay-san! I feel S370 and SDR is hottest now in the old hardware category.

Golden stick! congrats!

Great!

Nice run I.nfraR.ed-san!

I don't have that plan now.

Congrats!

Congrats! one after another good score from you.

Well done Team KATANA!!

Thanks, I.nfraR.ed-san and Strunkenbold-san, i will test use my MVP3 board it has 2M external cache.

@I.nfraR.ed-san: Yes tried XP but 2k little faster than xp in my set up, i chose 2k for only Aquamark2.1, this pifast run too slow, it's regardless of OS, I don't know what's wrong, and my SCSI card(very old) unstable in XP.

Thank you GraduS-san! 9200SE PCI(XIAi) but pci clock changed in bios.