stummerwinter

Same here... Bought/tested at least 20 pcs, and the first 2600K ist still the best with ~ 5575...And my 2500K doesn't help in all cases...

Thanx! @Smoke: have not enough CPU-power for 03... Need a CPU that can do > 5800... Maybe someone has a 2600K for sell...

Thanx to all of you! Have to say, GELID works pretty good, even at temps ~ -170°C... Saddly this card scales only up to 1,625 V - even with OCP-mod...

@JP: use normally a AX1200 too... But your 03 is really bad, gonna sent you an PM... @Petri: SLI sucks, even more Quad-SLI...

HOLY SMOKE...again...

Damn... You did beat me... Need more CPU power...

Nice... Which mainboard did you use?

Sry, not possible, because to expensive to produce... Some cards like or need 2,0 V (I don't have the 1,9 V hack), to run at lower temps... God hint! [X] *sign* I woulnd't use the metal backplate, causes to much condensation... That's the way I do it... plastic backplate covered with armaflex and an adhesive rubber foam (~ 3 mm thick) on the front, a litte rubber at PWM: slim container: and some more armaflex: most important tweak...

Great to read... Just to add: I tested right now 5 cards under LN2 in preparation for GC in Cologne... 1 x 1675/1400 3D03 1 x 1575/1300 3D11 1 x 1625/1350 3D11 1 x issues below -160°C 1 x not shure, tested different thermal grease These cards I got from Christian (via Michael) from ASUS Germany, thanx btw, just retail, nothing selected... Serial numbers: B5CVCM068782 ~ B5CVCM068788 (not all are present for me) and 68843 Found out, thermal grease in combination with container ist a issue, my big container is simly to wide, causes condensation at PWM! big one: slim version: The slim version works much better, but has lack of "cold power", but anyway, 1625/1350 where doable... Agree with MM, fw-voltage tweak ist not a really nice thing, but works somehow. I didn't use tweakit, simply pushed buttons and EVGA-tool to oc... I think, we should work on you insulation... BTW, JP: I failed also while ocing, the card which did the 1625/1350 in 3D11 was not modded OCP/PWM...

Thanx! Let's see, will be at GC on weekend, have to work until friday evening... BTW: vGPU = 1,60 V (at this run, tested also more, but forgot OCP-mod) vMEM = 1,80 V

MATRIX - not selected right now...

Hi Giorgio! Good to see you back in business!

Yes, back in business...

Yeah, it's fun again, still remember the good old times...

Used the hack with 1,9 V vMEM but got 2,0 V which solved my CB issues... But this score was done with 1,8 V hack... Increased the voltage on the card with +/--button, had also issues with the vGPU, once set, can't reduce, need to re-load the hack...

Congrats Bros!

Holy SMOKE, again...

WOOT! Nice one...

Nive one!

Congrats, awsome chip in your hands!

Congrats!

Somebody going to do SLI? Congrats Jan again...

Damn, Vince is back... Congrats!

Congrats Jan!

Holy smoke, congrats Jan! Impressive ccore! :nice: