GtiJason

Love the battle with SD, and omfg Marc is here. Great day for all with 3070 = 2080ti. Stoked to see you her

Wow, not sure who can fill these shoes !

uCode or uCode removed ? Been trying dif bios because I have all kinds of issues/bugs. Can't get MemTweakIt to even show timings all I get is "About" tab hit Apply does nothing, hit OK program closes. TimingConfig 4.0.3/4 shows 65535 for every timing. Tried XP and W10 May 2020 update

Yeah I remember now, posted this at like 2:30am on a school night lol

ES definitely works for non K OC, pretty sure an old teammate of mine (DJ) was first guy to do non K OC with Biostar. Here's a Hardware 1st place of his

I only used ASRock OC Formula for non K OC but for this board I remember it was all about the proper microcode and for example on Gigabyte if you had flashed a newer bios and wanted to flash to an older bios that supports non K OC you had to use FTP in Windows or DOS. Check your bios for the microcode version you have, maybe the 11T bios is not writing over that newer code. If you have an EVC2, rasp Pi, Arduino, CH341A programmer etc. that will take care of it by erasing and replacing bios

You should be able to use 7A12_11T no ? I can't find 133 anywhere despite there being downloaded over 700 times. Here's all the Non-K bios I have, there must be 40+ in this folder along with pdf's of Overclocking.guide for each brand of board

Very nice work ! You manage to run really cold ?

Think this is it setfsb_2_3_178_134.zip

Somethings off with this sub. Screenie shows 3294 XTU score but posted 3302 pts for Superposition 8k ?

Mine came from China via EBay https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=ddr3+memory+tray&_sacat=58058

So are you saying to pull a jumper wire from any 5v source to the 5v pin on usb ? Hope I can free up some more time soon for the OCF + PSC, so much fun to be had with X48 REX, Z97 OCF and new stuff like APEX XI / APEX XII

You got a bigger pic ? Hard to read even on big monitor

Good job bro !

Awesome run and effi ! Last piece of the puzzle to a well rounded bencher

Should be easy, check cpuz.ini file and make sure it's setup to read SPD. Mainones of concern are XOC=0 SPD=1 SMBus=1 DMI=1 Sensor=1

Sick !

Nice ! I've had APEX XII for weeks but no luck with cpu. Might just grab 10600k/10700k to play with mems

Yeah Keep !

Oh no's, cpu is cold scared now. I do not look forward to this myself

Are you talking about DDR4 platforms ? Anyways maxmem is broken in some versions of windows, usually Windows 10 so you will want to use this method Run CMD as Admin and type: bcdedit /set removememory 11264 This will leave you with 5120mb or 5gb (using 16gb kit), and as Keep said good setting for 3dMark Firestrike and newer 3d 3dM01 - 06, 11, Vantage, Heaven, AM3 etc can use less like 3gb To restore memory back to full 16gb just run CMD as admin again and type bcdedit /deletevalue removememory Other maxmem settings, Super Pi or Max mem freq on XP32 = 600 - 640mb Geekbench 3, CBR 11.5/15, GPU Pi for CPU, wPrime/PiFast here or above setting: 1.9 - 2.2gb HWBot X265: either no maxmem or around 7-8GB if having hard time getting good OC at around 1.6v ish Point is you can get away running 600mb, 3gb, 5gb, 8gb and no maxmem set for most benchmarks

Yeah, all (or at least most)HOF cards have this. At first I think it was used to control Chil8318 with IR DPDC 1.0.4303 / PowIRCenter via USB>UART (USB005) cable from IR Here are the I2c pins on my 1070

Nicely done my friend !

Monster !

Very Nice !