GtiJason
-
Posts
1708 -
Joined
-
Last visited
-
Days Won
21
Content Type
Profiles
Forums
Events
Blogs
Posts posted by GtiJason
-
-
Nice Shar, guess OCN having Hawaii theme party
-
1
-
-
Alright, good job bro !
-
She's a beaut David !
If I win I'd just like to try on SS and then do a quick 1 week contest and pass it on
-
On 4/5/2020 at 7:46 AM, Noxinite said:
For board 4 if I remove the EPS 8-pin the board will turn on, so clearly there is an issue there but the general resistances seem okay.
Also, I tried a working BIOS chip from board 3 in each of the other boards, however I still got the same behaviour.
Exact problem with my 2nd board
-
2
-
-
4 hours ago, Bonyus said:
how did I manage to overclock the processor without the "k" index, I have an i7-4770, and the Z87 motherboard / share a secret please)
"Boards such as the Z87X-OC have a special training procedure for the BCLK and it allows 110-114mhz on most every CPU, so you can do over 180mhz BCLK on air with these CPUs and boards.
Some boards won’t have this BCLK training and will be limited to 103mhz BCLK up and down, most mainstream boards for instance. They also won’t have the training procedure for when you set the BCLK.
For max bclk for 2d tests use bottom slot for discreet gpu. For 3d you will be limited
Use the last PCI-E slot on the Z87X-OC or any last slot which is directly hooked up to the PCH. You can find this slot as it will be a 4x PCI-E 2.0 slot, this slot’s PCI-E clock is always 100MHz while the other slots will go up with the BCLK/PCI-E clock you increase."
It is best to set the BCLK first and then change other settings such as memory
IDE mode, use it for your OS. Win XP/7 can 8/10 I'm not surehttps://community.hwbot.org/topic/77746-the-gigabyte-z87haswell-overclockingoc-guide/
-
On 2/12/2020 at 3:34 PM, zeropluszero said:
Fuck that right off.
If new shit cant be hacked to run on XP it'll be the last hardware I ever bench.Not sure what Mutt's saying about insta banning bios hacking to make W7 work on lga 1200, seems harsh
but XP appears to be possible on new Intel platform, so good news there ! -
Nice setup bro ! Good work
-
7 hours ago, Sparky's__Adventure said:
I did it, guys!
Edit: PB is now 5.52.516, same mem settings as in this post, just better 16k tuning and more aggressive waza.
Looking good man ! Must be nice to have a combo (imc,board,ram) that can do 4133c12-11 1T as well as 4800+ C14-13 2T.
I have a somewhat fussy APEX XI with imc on 8700k not much better that I just recently was able to run 4800c14 after trying far far far more kits than I've ever had to bin for a given setup.
First kit of BDie I bought from Dec 2015 did 4133c12 straight away 1.885v w/ wazza lol. (Edit, MOCF bios set V so about 1.940-1.950v real)
What do you mean by PB ?-
1
-
-
The quality is amazing David
-
You the best Roman !!!
-
1
-
-
3 hours ago, Sparky's__Adventure said:
Got a better run through, still inching closer. I have not found any success with lower vtt, the mem doesn't seem to like it at all.
I'm going to look around in OS and figure out how to reduce maxmem. It's not in msconfig, at least not like in Windows 10.
If you can't change in msconfig / Boot / Advanced options then use this . . .
Control Panel => System => Advanced Startup and Recovery => EDIT file: => / maxmem=600-
1
-
-
Nice to see you using the gpu with almost 84% asic. Responds well to temps at least -45C. Never had a pot to try colder but probably like my ti KPE and dice is max cold before problems
-
Nice one Angel !
NinjaEdit: Is that a VENOM on big cpu ?-
1
-
-
On 3/2/2020 at 2:58 PM, aerotracks said:
Thank you, I will try tomorrow. Another thing, just using BIOS defaults and then loading XMP I can train 4360 and no higher.
I then looked in to QVL and supported 4600 kits are all A0 while fastest A2 set is 4333 speed. Coincidence or is this max MHz for A2 on the board?
I can confirm that the 4600c19 kit is AO but never tried on x299 (the platform it was made for)
Usually use it on APEX XI or MOCF -
That's Devils Canyon for you. Poor scaling typical for cold and volts
-
Using HYKO's will net you a few points
-
Going to be hard to beat is she keeps scaling on lin, hard to beat the way it is on dice. Top spot could be yours if you keep er Froze and never let it Burn !
-
Just a guess but I think he wants an estimate on what his stuff is worth
This is best place to ask such question -
22 minutes ago, Gigelz said:
you can flash the x04 for the normal soc force onto the ln2 board with intelfpt without any problems. works perfect !
That's correct, I was very confused the first time I went to flash mine. Might have one specifically for ln2 board, will upload if so. Just send me a dollar by mail for each dl. ?
I'll just upload what I got so they are here for those in need
FPT-Z97(Win).zip mb_bios_ga-z97x-soc-force-ln2_f3.zip Z97XOCL2_X02.zip Z97XSOCF_X04.7z Z97XSOCF_X08.zip
-
1
-
1
-
-
-
On 1/2/2020 at 7:44 PM, l_Nuke_l said:
took a look there already. images dont load. thanks tho.
Where there's a will, there's a way ! Wayback Machine / Archive . org can sometimes help.
This time Archive.Gti can help you most of the way, only issue is the Q? do you have to remove any resistors like on this pic of 1080 Strix
s1080_tool_v02.zip S1080TIXOC.rar strix1080tistock.rom 1080TI_STRIX_LN2_TIPS.pdf
-
1
-
-
Good job Gigelz, solid ddr3 !
-
Lookin' good bro !
-
1
-
-
22 hours ago, speed.fastest said:
Does 0094 BIOS supporting i5 9600K? Thanks
If you are talking about the 0094HT I linked on November 22nd here's all the supported cpu's
-
1
-
1whiteshark1 - 2x GeForce GTX 970 @ 1667.5/1502.3MHz - 13sec 729ms GPUPI - 1B
in Result Discussions
Posted