GtiJason
-
Posts
1708 -
Joined
-
Last visited
-
Days Won
21
Content Type
Profiles
Forums
Events
Blogs
Posts posted by GtiJason
-
-
AIR Cooling XTU at 5.2g, never thought I'd live to see this. Nice cpu !
-
OK that's enough testing for you, it's my turn.
-
Updated OP, 32 shops now
Found one place to buy in US, has free shipping too
https://www.newegg.com/Product/Product.aspx?Item=9SIA5FY56T0002
-
This is SuperPi 1m adiirfan01, you can edit this sub top right corner
-
RTL's didn't train right either, showing 52/51/9/7, so take away 2 from the first dimm and it shows they wanted to be 50/51/7/7 or maybe even 49/50/6/6 possible
-
Smokin', but no delid wow. I wouldn't be trying this unless using my SS.
-
Impressive, must have taken a lot of energy. props to you my friend !
-
Anybody also see significant difference between Z170 and Z270 binned memory?
Just tested 4133 C12-11-11 tight binned on Z170 kit and it can barely run 4000 tight in 32M.
Another binned kit is OK... so it feels like that some kits don't like new platform?
Sure have, but for me its been a bit harder to train/find proper volt combinations for stability (vccio, vccsa and vttddr?). The biggest issue Ive seen is rtl's not training or only able to run looser. I've tried going between SKL/Kaby a few minutes apart with same b die and on SKL trained and was stable 4133c12-11 50/50/7/6 & 50/51/6/6 swapped to 7700k and would only train 58/51/15/7 and could only set 50/51/7/7 manually or no boot. Best method I've found to work for me was train at 4000 with dram volts far higher than needed (my kit does 4133c12-11-240-50-51-6-6 1.885-1.895v bios, waza stable), so I'll set like 1.970v bios then 4000 will train 49/50/6/6. Boot to OS, lower volts and bclk up to 4133 and have 49/50/6/6 rtl's. Never tried 32m tho, but gb3, maxxmem and xtu were stable
-
@Bullant and @emissary42 , the set doesn't boot with 2600mhz 12/12/12/35...anything above 2400mhz don't boot, i don't know if its because the mobo or maybe the CPU that can't handle
The only MSI board I have used that was good for 2600+ c8 was the Z97 XPower with the newest bios. I'm sure MPower could as well but I've never owned one myself. For your setup I'd stick to trying 2400c7 11-7-28 tcwl=6/7
-
hi , i have a i5 4590 with mobo msi z97- g43 , and i can´t go higher then 104 blck ,so i´m where too see iff you, guys can halp me with some tips, or bios mod too flash in my mobo.
The mobo is 1 week old
thank you all
Non k OC is locked on Z97 (Haswell/Devils Canyon). You are limited to the minor bclk oc that you've already found. If you are looking for points XTU is best/only real option with 4590
EDIT: This should not be in this forum, Elmors lab is for EVC/EVC software support, hard mods and complex Asus OC concerns. Mods feel free to move to Haswell/Devils Canyon OC thread
-
Testing cpu mount and mem pot / heatspreaders
Aluminium holdown and mem pot- BartX
Mem pot thanks to BigBlock990
Single Stage Phase change- Ron (runmc) from Under the Ice
Test Bench by JohnDoe
Board coating- Plastidip spray "Smoke"- by me
ALBUM
Z97 SOC Force LN2 - BartX cpu mount + mem pot - Album on Imgur
-
If you have not purchased hardware yet I suggest Z170/270 platform mobo, an unlocked processor- i3 7350k/i5 7600k/i7 7700k, a gtx 1060/70/80 or AMD RX 460/70/80 gpu, 2 x 8gb 3200c14-14-14 or higher single rank (sided) DDR4 ram, a Gold or platinum 850+ watt psu and a decent all-in-one watercooler such as NZXT X62, EK Predator, Swiftech H-240x etc
If you already have a rig, join an overclocking forum and spend time reading guides and topics that interest you like cpu, gpu or ram OC. No idea what you are trying to overclock makes it far too difficult to send you somewhere specific but heres a start
Skylake Overclocking Guide [With Statistics]
-
-
-
This run very ineffecient, had no intentions of benching anything other than SuperPi but after setting up OS and pouring down to fullpot realized 3 of 3 ver. Formula Drive were without text, and wPrime/PiFast wouldn't run. I've used same OS before and never had issues, need to re-run with new remove cpu pot mid bench cb tweak anyways
-
Yellow dimm slots and psc, huh never tried this. Probably because all 3 Z97 OCF's had them sealed tight from water. Good mems btw !
-
Amazing run, mad skillz !
-
Welcome back bro, nice gold !
-
-
Some 2T fun with Corsair 3200C14 B-Die on big yellow board
Okay, I now see why you let the ddr3 kit go. I've been drooling over these Dom P's myself for a while now, looking forward to 1t results in the near future !
.
-
Seems like yesterday the number to aim for was 6000, time fly's
-
4 ducks in a row, now that must be good luck !
-
Go Go Barbo !!!
-
Well, want a change of RAM possibly, or going with some smaller kit of similar speed!
So, could anyone tell me how much my kit may fetch please?
Not been overclocked sadly, 4000MHz was plenty for me. :worried:
Should have the box somewhere but ATM, lets go with it being unboxed.
Thanks.
RAM Model: G-Skill F4-4000C18Q-32GTZ - Specs here: Go on! Take a PEEK, you know you want to!
Most of the guys here are more concerned about how they overclock, and more specifically can they run Super Pi 32m with wazza at 4080c12-11, 4133c12-11 or more
. That is close to a $500 usd kit retail, why don't you sell them somewhere like reddit hrdwareswap, another OC forum or ebay. They are Samsung B die which is the most desired/relevant memory currently so they have that going for them. Basically since the XMP on B die hardly matters here most guys are not looking to spend over $100 on any untested 2x8gb b die. Maybe see if another UK overclocker with proper board and skills can test them for you as good b die can fetch $200 or so for 2x8gb kit
ASRock Z170M OCF funhouse
in Skylake/Kaby Lake/Coffee Lake (-X) (Z170/Z270/Z370/X299) OC
Posted
Haha, so true...