-
Posts
1304 -
Joined
-
Last visited
-
Days Won
12
Content Type
Profiles
Forums
Events
Blogs
Everything posted by Rauf
-
Probably waiting for HOT?
- 690 replies
-
- asrock
- formula-ddr4
-
(and 1 more)
Tagged with:
-
Dancop - Core i3 6320 @ 3990MHz - 735 marks XTU
Rauf replied to Bulshooter's topic in Result Discussions
Doesn't scale on ln2? -
Rauf - Core i7 6700K @ 6255MHz - 7459.81 pps HWBOT Prime
Rauf replied to ObscureParadox_3XS's topic in Result Discussions
Thanks! It's easier to see if you missed a spot with red -
Clean all contact areas with aceton, use kryonaut and mount really tight works well for me. Been benching six sessions straight at -170 and below with no crack. Last time I didn't even reapply tim on die, just left cpu mounted in socket and it worked as well. But you use kryonaut as tim and then seal with glue?
-
You need XP for this
-
Luumi - Core i7 4770K @ 6633MHz - 7248.83 pps HWBOT Prime
Rauf replied to Doug2507's topic in Result Discussions
That is insane! Imagine you would have done this a few months ago... -
Splave.ROM - GeForce GTX 980 Ti @ 1200/1800MHz - 601409 marks Aquamark
Rauf replied to DrTanK's topic in Result Discussions
Really impressive! -
Got myself an oc forumla now as well. What bios do you recommend? Seems some biosrs are missing from the bios list thread... Latest official is 1.50, but it seems people are using 1.44 something.
- 690 replies
-
- asrock
- formula-ddr4
-
(and 1 more)
Tagged with:
-
Rauf - Core i7 6700K @ 6167MHz - 1357 cb Cinebench - R15
Rauf replied to Leeghoofd's topic in Result Discussions
Thanks -
Used this MB for a 6 hour session at -170 on my 6700K yesterday. It works really well! A couple of things I have noticed: How the volts change the behavior of your CPU is really CPU dependent. It's not as easy as haswell, you will have to try all settings to see how your CPU reacts. ST-volts can make a huge difference on CB on some CPUs. Raising PLL volts might now work for some, but ST-volts will do the trick. For some ST-volts of 1.3V is enough, for one of mine it needed 1.6V to get below even -116. Memory OC is really great on this board. Might contest the Asrock in this generation! LN2 mode enabled in bios shuts of AES-instructions. You need these, at least for Geekbench or your score will hurt a lot. My board is early retail, and does not have physical ln2 jumper. You don't actually need it though. It runs fine without it on LN2. Or you could solder, just connect two points. For Samsung-E memory, you need at least 1.13 bios. The older T.0P won't run these mems well at all. Newer bios make them fly as you have seen in this thread! One annoying thing however is that often after a bios flash the board enters a sort of mode where trying to reboot won't work 9/10 times. The errors are persistent and occur both at stock settings and under LN2. Both reboots after bios changes and reboot from windows gets stuck. You have to power off, reboot into bios because board reports failed boot, reboot again and it works most of the time. Sometimes it will take multiple tries to get successful boot. Sometimes a reflash of the bios will help cure this problem, but I'm hoping for a fix in upcoming bioses. I have seen this reported by another user so I'm not alone with this problem.
-
Hi I have reported this before, but not gotten a reply. I'm trying to climb the rankings and so I would really like the missing OC-eSports Points from the MSI Beat the fastest competition. The problem is that my XTU-score is gone from the competition, and that moves me from first to fifth place. The submission is still in my profile, so I don't know what happened. It was not removed due to rules etc. Is there anything you can do to undo the undoing of my result It is also my greatest achievement so far, so I would like some way to remember this officially Here is the sub: http://hwbot.org/submission/2776163_rauf_xtu_core_i5_3570k_1141_marks News article: http://oc-esports.io/#!/article/2821/rauf_claims_top_spot_in_the_msi_beat_the_fastest_contest Thanks for your help!
-
Yes, tried way above 2V even. Nothing helped. Spent like three hours trying to get it going, so I think there was not a setting i did not try
- 489 replies
-
- skylake
- batch
-
(and 40 more)
Tagged with:
- skylake
- batch
- 6700k
- 6600k
- l510c971
- l510d077
- l512c763
- l514b860
- l519b740
- l519b743
- l519b744
- l519b875
- l519b892
- l519b932
- l519b972
- l519c078
- l519c087
- l519c193
- l520b668
- l520b669
- l520b990
- l520b994
- l520c033
- l521b643
- l523b383
- l523b475
- l523b667
- l524b278
- l524b329
- l524b520
- l524b542
- l524b663
- l525b503
- l525b504
- l525b530
- l525b538
- l525b711
- l526b243
- l526b394
- l527b204
- l527b622
- l527b662
-
LOL, tried mine on LN2 today...and it was absolutely horrible! Really bad cold bug, -110 with normal LN2 volts to help with CB. Had to raise to ridiculous ST-volts (MSI MB, don't know what they are called on others) to get rid of CB. Performed horrible as well. Max HWBOT Prime was 6GHz at 1.85V. Delidded, with kryonaut, of course.
- 489 replies
-
- skylake
- batch
-
(and 40 more)
Tagged with:
- skylake
- batch
- 6700k
- 6600k
- l510c971
- l510d077
- l512c763
- l514b860
- l519b740
- l519b743
- l519b744
- l519b875
- l519b892
- l519b932
- l519b972
- l519c078
- l519c087
- l519c193
- l520b668
- l520b669
- l520b990
- l520b994
- l520c033
- l521b643
- l523b383
- l523b475
- l523b667
- l524b278
- l524b329
- l524b520
- l524b542
- l524b663
- l525b503
- l525b504
- l525b530
- l525b538
- l525b711
- l526b243
- l526b394
- l527b204
- l527b622
- l527b662
-
Sold and shipped. Thanks for space!
-
Bullant - GeForce GTX 580 @ 1473/1166MHz - 179805 marks 3DMark2001 SE
Rauf replied to Andrix85's topic in Result Discussions
Great score! OCF works fine with XP? Might have to get one of those to then...Need special bios ?