Rauf
Members
-
Joined
-
Last visited
Everything posted by Rauf
-
300€ then. Last call -
Rauf replied to Massman's post in a topic in Skylake/Kaby Lake/Coffee Lake (-X) (Z170/Z270/Z370/X299) OCShouldn't low clock benchmarks feature something that most cpus can handle without a single stage or better cooling. Or risks the hardware? 5g xtu seems too high. Physics as well. Superpi not so much but many 6700k can't do 5 ghz superpi at all on air/water...
-
Only on LN2. But haswells are pretty linear when it comes to scaling on both volts and cold.
-
-
Rauf replied to Dancop's post in a topic in Skylake/Kaby Lake/Coffee Lake (-X) (Z170/Z270/Z370/X299) OCThanks for the replies guys!
-
Rauf replied to Dancop's post in a topic in Skylake/Kaby Lake/Coffee Lake (-X) (Z170/Z270/Z370/X299) OCHow do you guys get the kryonaut to such low temps without cracking? Tried Z170 on LN2 for the first time today and got the crack at -145. This was with my Kingpin EE with supertight mount! Springs fully compressed. And they are quiet sturdy... Do you use a thin or a little thicker layer?
-
Rauf replied to pepinorang's post in a topic in Skylake/Kaby Lake/Coffee Lake (-X) (Z170/Z270/Z370/X299) OCPerfect timing! Will bench my first session with this board tomorrow Thank you for the guide. Such guides are invaluable!
-
-
Have one for sale: http://forum.hwbot.org/showthread.php?t=146276
-
No, sorry. But I expect it to perform very well. It should boot windows at 5 GHz somewhere between 1.25-1.3V. Don't hold me to this though as I haven't tested it.
-
You need Microsoft Visual C++ 2008 x86!
-
Hi Selling a very good 4770K. Does 3Dmark05 4C/4T at 6.3 GHz with 1.65V. Only used twice on LN2. Not delidded. Batch L318B359. Cache is good for up to 6 GHz, didn't push it on the results below. CB around -130. No problem with IMC either, only tried Samsung but 2880 MHz 9-12-12 tight was fine (max for my mems). Used in the Gigabyte Z97 Last Hurrah comp: GPUPI - 6.15 GHz: http://hwbot.org/submission/2941544_rauf_gpupi_for_cpu___1b_core_i7_4770k_4min_26sec_69ms Geekbench single core - 6.27 GHz: http://hwbot.org/submission/2953548_rauf_geekbench3___single_core_core_i7_4770k_6288_points Located in Sweden, EU. Shipping will be around 15 euro insured. Price: 400 euro. Paypal, or WU if paypal not available in your country. Buyer pays fees.
-
-
Rauf replied to xxbassplayerxx's post in a topic in Skylake/Kaby Lake/Coffee Lake (-X) (Z170/Z270/Z370/X299) OCTested 4 6700K MB MSI XPower. None delidded. AIO Water Results: Best one:
-
Rauf replied to Strat's post in a topic in Skylake/Kaby Lake/Coffee Lake (-X) (Z170/Z270/Z370/X299) OCYou are very fast to reply! I meant about the spd for quad kits giving problem overclocking on z170. Have seen reported that two mems from a quad kit overclocks worse on z170 than four the same mems on x99.
-
Rauf replied to Strat's post in a topic in Skylake/Kaby Lake/Coffee Lake (-X) (Z170/Z270/Z370/X299) OCMy board will arrive today Hope Pepi can share bios and tools soon By the way Strat, no issues overclocking quad kits for you?
-
Rauf replied to Strat's post in a topic in Skylake/Kaby Lake/Coffee Lake (-X) (Z170/Z270/Z370/X299) OCThanks! Command center light would be nice as well!
-
Rauf replied to Strat's post in a topic in Skylake/Kaby Lake/Coffee Lake (-X) (Z170/Z270/Z370/X299) OCI like the MB, thinking about getting one. But I see you are using special bios (T0P) and it does not seem to be available anywhere. Anyone willing to share?
-
-
Rauf replied to Strat's post in a topic in Skylake/Kaby Lake/Coffee Lake (-X) (Z170/Z270/Z370/X299) OCNice of you to share! The msi board does seem nice. How about RTL and IOL?
-
-
-
-
-