websmile

SPD tab is mandatory to show that retail memory was used according to the rules and you forgot it, like several other people. No choice for me but to remove the score from competition. This is why I always emphasize that reading the rules carefully (general and stage rules) is important

Not bad, KPE is really going strong - with higher cpu next stop 35k?

The general rules for Catzilla apply, as long as you stay in these limits you are free to tweak whatever you want - also loading time, I guess this is a legit tweak

Verification Link is not mandatory, so not required

Rules have been reworked so that they are more precise(Thanks, Pieter), you only need one gpuz tab, sensor gpuz tab not mandatory, hwmonitor covers cpu temp and therefore also igp, please do not forget mainboard and spd tab when you screen results

I made a last precheck, results looked good at first glance

Maxmem is limited to the use of via 133 chipset - please check the rules and keep this in mind XP should be OK, but win7 was used as well @all I made last precheck today, please include mainboard tab, especially for maxmem, because it is chipset bound as stated - no mainboard tab means I cannot verify this, so I had to remove results today

Please remember that this is a vendor based competition, this means you have to include mainboard tab or your scores will go out of ranking - I made last precheck today and had to remove some scores

All sold, nothing left - please move to sold, thanks for the space HWBOT

PID are sold and already shipped, first and only bump for the Tridents

No, Broadwell is out, and Pieter will get the job done soon

Hi Up for sale are my last bench PSC, since I bailed out of benching I decided to make a clear cut now and sell them 1. 3x2GB G.Skill DDR3-2000 CL6-9-6-24 PID 8117 PCB, easy 2667 tight and more, I received these as backup in case I would decide to bench again when I sold my 2400C9PIS and my 2133C8 RipjawX. Never used them for real benchmarks, but they did 2400 C7 below 1,65v on Z77 and on Z97 2667 C8 tightworked easily on Asus Impact and Asrock OCF when I tested them. 2. 3x2GB G.Skill Trident DDR3-2000 CL9-9-9-24 1,6v These were my test and bench kit for quite a while, all sticks easily do 2667 tight and more, for benchmarks I ran best two sticks above 2700 tight with less than 1,9v, headroom left. In the past I combined this kit with a Flare stick I had which gave two dual kits that did 2730 and 2700+, I guess this shows how good this kit is, I had lots of tridents but these are strongest in the end. In original blister package Prices (shipping not included) 1. 175 Euros sold 2. 140 Euros sold The mems are located in germany, shipping will be with deutsche Post and will be around 12 Euros per kit including tracking and insurance. Payment is possible with paypal or western union. Please do not offer trades for ddr4 like happened at my last thread, it is more than uncertain I will ever test skylake so I would rather keep my psc than trade them for crap that needs cas15 Disclaimer: Private sale, no returns, also no warranty provided by me. On oc, ymmv, but these are very strong mems and they will get the job done, especially because I tested them on air and IMC on air as well, no voodoo

Please move, search is no longer valid - thanks for the space HWBOT

Please move to sold, thanks for the space HWBOT

I do not want to spoil the fun, but 6600GT is what it says, I would have no problem with single card because sli is faster, but no 6800 - sorry

Your new golden one? Very nice result Edit - OK, is not your new retail, looking twice sometimes pays^^

Bump, imho 155 for a quad kit of decent quality is not too bad

Fast test added, 32m 2800c9 tight around 1,97v, I took two random sticks of the quad kit

HWMonitor is enough, GPU is in cpu - on the driver, try several different ones, sorry, on this I cannot help you

After a question about Broadwell, it is not allowed and rules will be clarified, on HWMonitor - launch only after benchmark is enough, idle temps will be lower than load anyway, at least I accepted this for 2D and will not change for 3D P.S. please do not forget CPUZ spd tab and make sure it displays info - I had to remove some scores from 2d battle because of this and I am not happy about it, the contestants lost their results due to sloppy rule reading

Yes, same wallpapers, as there are no new ones and comp already started Important info for contestants IGP means the integrated graphics unit of the cpu - you are not allowed to use a discrete vga like some have for the start Link for definition of different vga types here

On the IGP-issue - contact MSI - I would not have chosen this as well for a comp like this - but please take in, if MSI would have asked for a highly expensive videocard result by, for example 980TI MSI or a 970 or whatever, criticism that money dominates comp would have been real big On general rules for EL comps, we have to live with the limits, you know it as good as I do. Temps are hard to control when you have an online competition, as well as some other issue. Sure we see suspicious results, we sometimes ask for proof then including video stream for example. So, we also count for ethics and wait for the mistakes of the people who don´t have these Enjoy the competition, as said before, a lot is compromize on rules but we tried to find a balance. Maybe not always successful :celebration:

I moderated the extreme part of this comp today, and there was nothing inadequate or foggy - because ther is not temp and no cooling limit. Maybe you should consider to use your enormous experience and move up to XOC

Criticism on temp limit is OK, but rules are same for everyone - we will consider the Input though, but I benched more than 10 years and I can tell you that it is not hard to manipulate "idle temperature".

I have still some PSC, 3x2gb 2000c9 trident and 2x2GB Flare1800c7, four sticks do 2667+, fifth one is weaker. 200 Euros plus shipping for the whole bunch^^ Kit1 (1xtrident+1xflare) kit2 (remaining two trident sticks), they do 1350 easily as well I normally limited tests and benches to 1,90v max, but they scale further, I tried once to see if they pass can take more volts with memtest. Good mems, but some sticks have trp weakness on air, which you normally can easily level on cold due to more volts and temps low