GRIFF Posted April 10, 2014 Posted April 10, 2014 (edited) For sale the fantastic kit 2x512Mb Crucial (single side) with legendary chips D9GMH. Supported fully stable frequencies (1 hour of memtest) (air cooling): Dual Channel CL3-3-3-8 2.65V = 450MHz CL4-4-4-12 2.65V = 580MHz CL5-5-5-15 2.65V = 645MHz For test i'm use Maximus II Gene (Intel P45) & Biostar Tpower I45. I have 2 kit. Price 30€/kit + spedition. My location: Genoa, Italy Photo: Edited September 28, 2014 by GRIFF
GRIFF Posted April 10, 2014 Author Posted April 10, 2014 Is price per kit or for five kits total? for kit )))
Christian Ney Posted April 11, 2014 Posted April 11, 2014 (edited) That's way too much bro Edited April 11, 2014 by Christian Ney
TaPaKaH Posted April 11, 2014 Posted April 11, 2014 Christian Ney broke Marketplace rule #14, ban him!
Administrators websmile Posted April 11, 2014 Administrators Posted April 11, 2014 Lame excuse, time to ban you :nana:
darco_2 Posted April 19, 2014 Posted April 19, 2014 I'm a bit worried about this: "(1 hour of test) (air cooling)" + "CL5-5-5-15 2.6V = 620-625MHz" Just to set things straight: you hit those modules with 1h of @2,6V testing?
GRIFF Posted April 28, 2014 Author Posted April 28, 2014 (edited) I'm a bit worried about this: "(1 hour of test) (air cooling)" + "CL5-5-5-15 2.6V = 620-625MHz" Just to set things straight: you hit those modules with 1h of @2,6V testing? These modules will withstand up to 2.7V on the air. Edited April 28, 2014 by GRIFF
Samsarulz Posted May 2, 2014 Posted May 2, 2014 Do you ship to Chile? Those kits are naked or have some heatsinks?
GRIFF Posted May 3, 2014 Author Posted May 3, 2014 Yes. But in this time i found one problem of My motherboard and i need ramake all tests. Wait some days. Thanks.
GRIFF Posted May 9, 2014 Author Posted May 9, 2014 (edited) I have found one parameter (NB to DDR Reference voltage) of my Maximus 2 Gene which prevented overclocking of RAM and i remake CL5 and CL4 tests of all modules with this results: CL4 single channel 580 MHz 2.55V CL4 double channel 570 MHz 2.55V CL5 single channel 650 MHz 2.55V CL5 double channel 640 MHZ 2.55V 640-650 MHZ CL5 limit of this motherboard, i need DFI or Gigabyte P45 boards for more tests. For my opinion this chip they pass 730-750 mhz on air. Edited June 18, 2014 by GRIFF
Calathea Posted May 9, 2014 Posted May 9, 2014 I have found one parameter (NB to DDR Reference voltage) of my Maximus 2 Gene which prevented overxlocking of RAM and i remake CL5 and CL4 tests of all modules with this results:CL4 single channel 580 MHz 2.55V CL4 double channel 570 MHz 2.55V CL5 single channel 650 MHz 2.55V CL5 double channel 640 MHZ 2.55V 640-650 MHZ CL5 limit of this motherboard, i need DFI or Gigabyte P45 boards for more tests. For my opinion this chip they pass 730-750 mhz on air. Just a note, if you have not tested higher than 650 cl5, you can by no means "suspect" that they will do 700+. Many good 600 MHz cl4 D9's top out below 700 cl5
GRIFF Posted May 9, 2014 Author Posted May 9, 2014 (edited) My better module: 630 mhz CL4 2.59V Edited May 9, 2014 by GRIFF
GRIFF Posted May 9, 2014 Author Posted May 9, 2014 (edited) 665 mhz CL5 2.57V Edited May 9, 2014 by GRIFF
Guest barbonenet Posted May 12, 2014 Posted May 12, 2014 griff mene serve proprio una coppia! dammi le migliori mi raccomando......cosi non ho problemi a salire;) pm
Recommended Posts