Andrix85 Posted May 19, 2014 Share Posted May 19, 2014 Hy boys, i have this mboard to bench with 775 cpu...i reach easy 505 mhz fsb, but i can't go higher...I set NB 1.5V, PLL 1.65V...Someone can give me some advises about his mboard ? I don't find other bios or programs to overclock better perhaps... Thanks Quote Link to comment Share on other sites More sharing options...
Guest TheMadDutchDude Posted May 20, 2014 Share Posted May 20, 2014 Try setting a higher vNB. This board isn't great for overclocking with though. Quote Link to comment Share on other sites More sharing options...
nedernakker Posted May 20, 2014 Share Posted May 20, 2014 1.5V NB should be enough for at least 600 MHz FSB. try the GTL settings and see if the bios has the clock setting fine delay options like the p45 dark.. Quote Link to comment Share on other sites More sharing options...
Administrators websmile Posted May 20, 2014 Administrators Share Posted May 20, 2014 DFI X38 and X48 are usually weak on max FSB, these are simply not good at OC, I had several boards myself which I tested and also know lots of people who were severely disappointed by these series`. Try playing with voltages, GTLs, VTT etc like proposed, but I fear you will stop far from reaching 600 even with ideal settings. Grab yourself an Asus X48 - or maybe a P45 DFI or Gigabyte for quads Quote Link to comment Share on other sites More sharing options...
basco Posted May 20, 2014 Share Posted May 20, 2014 had the same exp with 3xgiga x48 dq6 which all stopped at around 500 fsb no matter what. Quote Link to comment Share on other sites More sharing options...
K404 Posted May 20, 2014 Share Posted May 20, 2014 Funny..... I have a DFI P45 and 515FSB is where things stop being "easy" Quote Link to comment Share on other sites More sharing options...
Administrators websmile Posted May 20, 2014 Administrators Share Posted May 20, 2014 Funny..... I have a DFI P45 and 515FSB is where things stop being "easy" Try GTLs and clock fine tuning setting in advanced menu, unless you are very unlucky board should do much higher fsb - all three dfi p45 I had, T2RS and T2RS plus, did above 600 fsb on air with different wolfdales Quote Link to comment Share on other sites More sharing options...
K404 Posted May 20, 2014 Share Posted May 20, 2014 I was expecting much better than 515, yes but I felt that I should be hitting much closer to 600 without having to get "deep" Time to dig out some old notes Quote Link to comment Share on other sites More sharing options...
Andrix85 Posted May 20, 2014 Author Share Posted May 20, 2014 I have three settings for GTL...one it's for NB and two for CPU...the basic value it's 110, but i don't Know if it's Voltage or other... Quote Link to comment Share on other sites More sharing options...
TerraRaptor Posted May 20, 2014 Share Posted May 20, 2014 There are tables in the web for DFI P35 but they didn't help me. I remember using something like 40/80/80 for >550fsb with 1.6vnb. Quote Link to comment Share on other sites More sharing options...
Kotori Posted May 20, 2014 Share Posted May 20, 2014 (edited) I had put south bridge voltage near maximum, in my case http://valid.canardpc.com/show_oc.php?id=2610799 but it's LT Edited May 20, 2014 by Kotori Quote Link to comment Share on other sites More sharing options...
Andrix85 Posted May 20, 2014 Author Share Posted May 20, 2014 I had put south bridge voltage near maximum, in my casehttp://valid.canardpc.com/show_oc.php?id=2610799 but it's LT Also mine it's LP LT X48 T2R, but i need more performance mboard...I sell it... Quote Link to comment Share on other sites More sharing options...
Crabby Posted May 21, 2014 Share Posted May 21, 2014 Its a great mb for the lower fsb chips like Celerons and Pentium E5xx and looks great when exposed to uv light! lol http://hwbot.org/image/1172567.jpg Quote Link to comment Share on other sites More sharing options...
ZFeSS Posted May 22, 2014 Share Posted May 22, 2014 Most mobos on X38/X48 limited to 500-550MHz FSB, DFI too. High vNB and high vPLL (2v or more) is helpful, but it's not the same clocking as for asus x48. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.