September 5, 201410 yr Just to be totally clear about this... those processor speeds are stock speeds, right? Wouldn't be much of an overclocking contest if we were all stuck on the same frequency! So... what is the frequency, Kevin?
September 5, 201410 yr Here's some 32m tweaks http://www.overclock.net/t/1249432/super-pi-32m-tweaking-guide And as for copy wazza I use ocx spi tweaker And for amd users look here http://hwbot.org/newsflash/2099_the_stilt_releases_bulldozer_conditioner_software_amd_superpi_history_to_be_re_written and here http://forum.hwbot.org/showthread.php?t=86959
September 8, 201410 yr What you really need is something like 2600c10 TridentX with HCH9/HYK0 which are dual sided 4gb sticks. Those low bin kits won't don't very well when put up against something like the tridents because I don't think that the low bin stuff can run at 2800 c9-12-12-14 twcl 6 like the 2600c10 Tridents can
September 8, 201410 yr True, but wanted to take these sticks to the competition. Current score (not uploaded to HWBOT yet) is 07:08:300. If sub 7 can be achieved with these sticks thats amazing!
September 9, 201410 yr Question about this competition.. Is it correct to say that processor speed is not limited for the FS stage?
September 9, 201410 yr What you really need is something like 2600c10 TridentX with HCH9/HYK0 which are dual sided 4gb sticks. Those low bin kits won't don't very well when put up against something like the tridents because I don't think that the low bin stuff can run at 2800 c9-12-12-14 twcl 6 like the 2600c10 Tridents can 7 seconds dead was close .. but this is the best I could get out of em: http://hwbot.org/submission/2625103_koekwau5_superpi___32m_pentium_g3258_7min_3sec_219ms Still very impressive for these very old DIMMS I found Gl for place 1,2 and 3 everyone. I'm out cuz I can't do better with the currrent hardware I have @ home.
September 10, 201410 yr 7 seconds dead was close .. but this is the best I could get out of em:http://hwbot.org/submission/2625103_koekwau5_superpi___32m_pentium_g3258_7min_3sec_219ms Still very impressive for these very old DIMMS I found Gl for place 1,2 and 3 everyone. I'm out cuz I can't do better with the currrent hardware I have @ home. Looking good mate. Have you wazza and had a look at the thread I posted? If you have not done wazza it could very well get you below 7m and I'm working on a fx 4100 + HYK0 based mems + amd 760g chipset
September 10, 201410 yr Looking good mate. Have you wazza and had a look at the thread I posted? If you have not done wazza it could very well get you below 7m and I'm working on a fx 4100 + HYK0 based mems + amd 760g chipset Followed everything you said and it did shave of a couple of seconds! Thanks for that =) It's really the timings not cooperating. 10-13-13-18-104-1T with 2500Mhz ain't gonna do the sub 7 trick. Think I need 10-12-12-15-104-1T for that. But still cannot believe what these simple el cheapo modules are capable of =)
September 10, 201410 yr Yeah that's Samsung ICs for you Also what volts are running them? Samsungs love lots volts and doesn't really shine till 1.9v+
September 10, 201410 yr Been pushing 1.85V. I'm scared I might damage my 5Ghz Pentium G3258 IMC pushing more volts. Or do you need to push way more to make that happen? Awesome to read even 1.9V ain't a problem for these unstoppable DIMMS. The last 0.05V could mean stability for 11-13-12-18-104 and maybe even 11-12-12-18-104. Gonna try it this weekend. I'll let you know =)
September 10, 201410 yr Holy shi*** 49 people at day 10th days of competition. This is more interesting each day.
September 11, 201410 yr Just wanted to clarify on this submission is it valid http://hwbot.org/submission/2622512 GPU 7970 but the correct GPU should be 280X Thanks Edited September 11, 201410 yr by rayhow
September 11, 201410 yr Just wanted to clarify on this submission is it valid http://hwbot.org/submission/2622512 GPU 7970 but the correct GPU should be 280X Thanks I said all Tahiti. The HD 7970 is a Tahiti so it's a OK. Also nice clock on that card I had a Vapor-x that got to 1210/1650 at best. BTW why did you run the 7850K @ 4.39Ghz with a stock NB frequency when the maximum for AMD SuperPi is 4.57Ghz. Edited September 11, 201410 yr by buildzoid Mistake about frequency limit
September 11, 201410 yr should have mentioned that problem earlier let the Organizer do the changes to avoid any suspicion report on the submissions Edited September 11, 201410 yr by rayhow
September 11, 201410 yr should have mentioned that problem earlier let the Organizer do the changes to avoid any suspicion report on the submissions I'm the organizer and the Firestrike stage clearly states that: "Only use videocards based on the Tahiti, Tahiti Pro, Tahiti Pro', Tahiti XT, Tahiti Pro'', Tahiti XT', GK104, GK104', GK104'', GK104''' core." The HD 7970 uses a Tahiti XT core so it's fine. Edited September 11, 201410 yr by buildzoid
September 12, 201410 yr Rayhow >> Submission validated by Don_Dan, as it's a detection issue by 3DMark. You can continue benching serene now
September 12, 201410 yr Ok, I'm right bloody sick of this. Trying to enter videocard and it refuses every combination of "Radeon" "HD" "7950" etc etc I can think of, and auto-complete doesn't give enough choices. So what exactly does it want there?
September 12, 201410 yr Never mind. Wanted a series on top of manufacturer. Now how would I know that? Cannibalized the stock cooler long ago.
September 13, 201410 yr I have a problem regarding my submission. I can't select 2cores ( there is only selective cores 4x and 6x ) How can I correct this ? >> http://hwbot.org/submission/2627629 <<
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.