Hilderman Posted April 11, 2015 Posted April 11, 2015 what factors are used regarding the invite list for this competition? Quote
Massman Posted April 11, 2015 Posted April 11, 2015 Oops, that was a small bug. The competition is open to every Rookie overclocker! (please let me know if you're not able to submit) Quote
IronMetal Posted April 11, 2015 Posted April 11, 2015 I can't compete against @Hilderman 4900MHz, was funny anyway Quote
Hilderman Posted April 11, 2015 Author Posted April 11, 2015 ok, another potentially stupid question what are the settings for the GPUPI benchmark? i only have a selection for gtx 970. no cpu setting. I am def a rookie with all this Quote
IronMetal Posted April 11, 2015 Posted April 11, 2015 I did have CPU selection at GPUPI benchmark, that's weird Quote
Hilderman Posted April 11, 2015 Author Posted April 11, 2015 I'll try and post a screen of what i have. weird. prob a rookie error, lol Quote
skulstation Posted April 12, 2015 Posted April 12, 2015 had the same problem the furst time i traid this benchmark on a cpu,so no rookie error lol. but than i found this post from GENiEBEN Assuming it's an Intel CPU, download and install the runtime needed https://software.intel.com/en-us/articles/opencl-drivers Quote
IronMetal Posted April 12, 2015 Posted April 12, 2015 @Hilderman, what voltage and cooling solution do you use for 4900MHz? If you don't mind sharing Quote
Hilderman Posted April 13, 2015 Author Posted April 13, 2015 1.43 ish, gone as high as 1.48 vcore but with little return. Corsair H60i at the moment. 24/7 I run 4.6MHz @ 1.275 vcore Quote
delabody Posted April 15, 2015 Posted April 15, 2015 Hi @ all users in rookie rumble#17, please look that you use the right settings for stage 3 benchmark... some users are posting their graphiscard scores instead of cpu scores.....the wrong timings... u have to post that timing from cpu in GPUPI for CPU - 100M.... Best Regards and have fun while benching ;-) Quote
delabody Posted April 15, 2015 Posted April 15, 2015 @Hilderman, u have to download some additionaly drivers from intel that u can see your processor in settingsmenu from GPUPI for CPU - 100M... its writen in the description on that hompage from GPUPI for CPU - 100M... in german and english ;-) sorry fro my bad english guys... Quote
Taloken Posted April 17, 2015 Posted April 17, 2015 It would be nice to make GPUPI a per-core stage, actually it favorise too much Xx9 platforms over Zx7 ones. Quote
Massman Posted April 17, 2015 Posted April 17, 2015 It would be nice to make GPUPI a per-core stage, actually it favorise too much Xx9 platforms over Zx7 ones. Per core benefits 8core event more since the score is "lower = better" Quote
alQamar Posted April 17, 2015 Posted April 17, 2015 Hello the rules for GPUPI 100M state screenshots for another benchmark. Please check this and report back if this is intentional or erratic. Thank you. Quote
alQamar Posted April 17, 2015 Posted April 17, 2015 Are those the correct settings regarding the rules for this competition? 1. OPENCL > Select CPU 2. Select 100M HWBot CPU 3. Batch size: 20 M 4. Reduction size: 64 Quote
alQamar Posted April 17, 2015 Posted April 17, 2015 not a fair competition anyway, because there is no ranking for same hardware How would I be able to beat a X99 platform with an old Sandy Bridge, but I am quite satisfied with my #28 place atm. Quote
Taloken Posted April 18, 2015 Posted April 18, 2015 Per core benefits 8core event more since the score is "lower = better" Yep but for NN#2, you make the GpuPi stage as a per-core stage. http://forum.hwbot.org/showthread.php?t=132135 In my memories, all multi-threaded benchmarks for RR (hwbot prime, cinebench ...) were implemented in a per-core stage. Quote
Wiggles Posted April 19, 2015 Posted April 19, 2015 Can we disable cores for HWPrime? or does it have to be all cores used(IE 4 cores disabled in a 5930K or 6 cores disabled in 5960X?) Quote
Crew Leeghoofd Posted April 20, 2015 Crew Posted April 20, 2015 (edited) !!! Plz guys make squre you are not wasting your efforts on HWBot Prime and GPU benchmark in Windows 8 or later OS versions !!! Also make sure the scores are visible and the CPU-Z CPU and Memory tab are included in the screenshot Edited April 20, 2015 by Leeghoofd Quote
Crew Leeghoofd Posted April 20, 2015 Crew Posted April 20, 2015 Can we disable cores for HWPrime? or does it have to be all cores used(IE 4 cores disabled in a 5930K or 6 cores disabled in 5960X?) Full core run mate Quote
delabody Posted April 21, 2015 Posted April 21, 2015 Hi Guys, can please tell me anyone, how to handle that gpupi 100M CPU -benchmark.... ???? in my opinion its only a lucky thing to get a good result there.... i run that benchmark a few times all with same bios settings.... and always got different scores..... doesent matter if i overclock my cpu or not.... any suggestions here? Quote
Taloken Posted April 24, 2015 Posted April 24, 2015 Seems like sharing is hard with local products on stage 3 .... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.