So,here it is. 2300 c8 2*2 PI mem on air.

 

can u please give me an estimate value of it ?

stock cooling fan,and box is still avaliable so its a complete package when comes to shipping.

 

thanks

 

Adam

The kit looks very good but some of the secondary/tertiary timings on your run are way off what people normally use for benching.

If it can do same sort of voltage with secondaries of 4-96-10-4-26-4-5-6 and tertiaries 4-5-4-15-4-4-4-4-4-11-11-11 then it could be worth around 150 Euros (maybe 200 more if buyer is desperate).

The kit looks very good but some of the secondary/tertiary timings on your run are way off what people normally use for benching.

If it can do same sort of voltage with secondaries of 4-96-10-4-26-4-5-6 and tertiaries 4-5-4-15-4-4-4-4-4-11-11-11 then it could be worth around 150 Euros (maybe 200 more if buyer is desperate).

 

Thanks for the help Sam!

will rebench it with those settings.

well well well... I will keep it,it seems. With the recommended 2-3 settings it fails to pass 32m at 2600 with 1.91v

Im a bit sad.

Try the X04 Bios, if it still doesn´t work at tight settings the kit seems to dislike tight settings

Will give it a try mate,thanks

There might also be one particular subtiming that the kit is not too fond of at low voltage.

There might also be one particular subtiming that the kit is not too fond of at low voltage.

 

That is possible,and maybe the bios im using is not the best,and in addition my board is a bit hurt so I have to use the black slots for dual channel.. After an ln2 session maybe I was a bit too fast removing the frozen dimms and the b channel is not working anymore only if I apply a bit of side pressure on the stick.. then its recognized by the bios.

did you try 2800 at your original timings might be interesting

nah man,currently the x99 setup was under testing but I want to test my g3258 again with these sticks so I will give it a try.

some psc does not like Sam's super tight subs, dont be sad, its still an awesome kit bro