Mysticial Posted December 7, 2016 Author Share Posted December 7, 2016 Just a heads up to any staff members who might want to know... I'm planning a March 14th (Pi Day) release of version v0.7.2 of the program next year. And it will not be speed consistent with the current v0.7.1 release. Let me know if this will cause any problems with any ongoing competitions that will cover that date. I can't say what the speed difference is since that isn't set yet, but it will be more than enough to trip up an ongoing competition. The date isn't set in stone and will depend on the stability of the program in the preceding month. But it is the date that I tend to aim for since it's Pi Day. Quote Link to comment Share on other sites More sharing options...
Mysticial Posted March 14, 2017 Author Share Posted March 14, 2017 I did actually make it in time. Version 0.7.2 has been released. Happy Pi Day everyone! This new version is faster than the previous version on pretty much all processors that I've tested on. For internal reasons, you are now required to use the latest submitter version (v0.9.6). Here are some submissions from the Ryzen build that I used to tune for Zen. Mysticial`s Y-Cruncher - Pi-25m score: 1sec 503ms with a Ryzen 7 1800X Mysticial`s Y-Cruncher - Pi-1b score: 1min 36sec 626ms with a Ryzen 7 1800X Mysticial`s Y-Cruncher - Pi-10b score: 22min 12sec 565ms with a Ryzen 7 1800X Quote Link to comment Share on other sites More sharing options...
Mysticial Posted March 23, 2017 Author Share Posted March 23, 2017 Has anyone ever seen a machine with 6TB of memory? Quote Link to comment Share on other sites More sharing options...
IanCutress Posted March 24, 2017 Share Posted March 24, 2017 (edited) No client version given, required version: 0.9.6 ?! Using 0.9.6.114, submit through the interface. Edited March 24, 2017 by borandi Quote Link to comment Share on other sites More sharing options...
Mysticial Posted March 24, 2017 Author Share Posted March 24, 2017 No client version given, required version: 0.9.6 ?! Using 0.9.6.114, submit through the interface. I'll investigate tonight. I pushed an update a few days ago, but it's certainly possible that I broke something. Quote Link to comment Share on other sites More sharing options...
Mysticial Posted March 25, 2017 Author Share Posted March 25, 2017 No client version given, required version: 0.9.6 ?! Using 0.9.6.114, submit through the interface. I can't reproduce the issue. Submissions work fine for me. Can you give me more information? Such a screenshot of the error? Quote Link to comment Share on other sites More sharing options...
Mysticial Posted July 2, 2017 Author Share Posted July 2, 2017 If anyone's wondering about AVX512. It's coming... No ETA yet since I've hit a number of unexpected snags. If you're wondering why the chip is underclocked. There's a reason for that. And it's a long story. Don't worry, it's much harder to fry your chip with AVX512 than I'm making it sound - unless you disable thermal protection... Quote Link to comment Share on other sites More sharing options...
Mysticial Posted July 7, 2017 Author Share Posted July 7, 2017 And version 0.7.3 is out. And here are the first few submissions on a Core i9 7900X @ 4.0 GHz (all-core AVX512) and memory @ 3200 MHz: Mysticial`s Y-Cruncher - Pi-25m score: 0sec 739ms with a Core i9 7900X Mysticial`s Y-Cruncher - Pi-1b score: 38sec 522ms with a Core i9 7900X Mysticial`s Y-Cruncher - Pi-10b score: 8min 51sec 111ms with a Core i9 7900X The AVX512 didn't bring as much of a speedup as I'd hoped. But it's still enough to beat all the Haswell and Broadwell HEDTs and come within arm's length of the dual-socket servers. Quote Link to comment Share on other sites More sharing options...
Mysticial Posted January 21, 2018 Author Share Posted January 21, 2018 (edited) Just a heads up, submissions are currently broken. The HWBOT API seems to have changed without any warning: http://forum.hwbot.org/showthread.php?t=175630 So until that gets resolved, no submissions will go through. Edited January 21, 2018 by Mysticial Quote Link to comment Share on other sites More sharing options...
Administrators websmile Posted January 21, 2018 Administrators Share Posted January 21, 2018 I will create an internal task for richbastard, we just implement a new server and hwbot revision, might be because of this Quote Link to comment Share on other sites More sharing options...
Mysticial Posted January 23, 2018 Author Share Posted January 23, 2018 (edited) This is getting fixed on both sides. richba5tard says a server-side push tomorrow will change the default from XML back to JSON. At the same time, I've updated the HWBOT Submitter to explicitly request JSON. Here the first submission of the new y-cruncher version that I released yesterday (and re-released just now with the fixed HWBOT Submitter): http://hwbot.org/submission/3766703_ Edited January 23, 2018 by Mysticial Quote Link to comment Share on other sites More sharing options...
P5ych0 Posted November 1, 2019 Share Posted November 1, 2019 (edited) HWBOT Submitter shows all time, no Benchmark found. Latest Version 0.7.8 Y Crunsher How to fix it ? Edited November 1, 2019 by P5ych0 Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted November 1, 2019 Crew Share Posted November 1, 2019 (edited) @P5ych0I found a workaround, here: 1) try to run manual once ( choose 0 -1- 1 ), 2) once it completed open the hwbot submitter , your previous result should be in there 3) Either press Run Benchmark or go to Options - Run a Benchmark - choose the 1B one 4) Select the run you want to submit - Submit to HWBot Edited November 1, 2019 by Leeghoofd Quote Link to comment Share on other sites More sharing options...
P5ych0 Posted November 3, 2019 Share Posted November 3, 2019 On 11/1/2019 at 9:19 PM, Leeghoofd said: @P5ych0I found a workaround, here: 1) try to run manual once ( choose 0 -1- 1 ), 2) once it completed open the hwbot submitter , your previous result should be in there 3) Either press Run Benchmark or go to Options - Run a Benchmark - choose the 1B one 4) Select the run you want to submit - Submit to HWBot Thanks Albrecht, i couldt fix it. WinRAR was the problem. Quote Link to comment Share on other sites More sharing options...
klopcha Posted April 27, 2021 Share Posted April 27, 2021 Problem with submit 25M ( but with 1B OK). Everything is correctly determined, but error with information: "Sorry, there are a few errors in the form. Please fix them and submit again. You are not using a compatible version of y-cruncher - Pi-25m: 1.0.2. You can download the latest version here: http://bit.ly/2l5VC1V" Try edit result and: "No client version given, required version: 1.0.1 1 Quote Link to comment Share on other sites More sharing options...
_mat_ Posted April 27, 2021 Share Posted April 27, 2021 (edited) 25m is no longer an active category on the bot. @Leeghoofd This question arises again and again. It might be best to enable 25M but don't give any points. Edited April 27, 2021 by _mat_ Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted April 27, 2021 Crew Share Posted April 27, 2021 It is in Beta ( so no points ) , but I'll contact you on discord Mat , I can manually submit the datafile , but not via the automatic uploader. EDIT: Small update on the HWBot API and it works, thx Mat 1 Quote Link to comment Share on other sites More sharing options...
klopcha Posted May 2, 2021 Share Posted May 2, 2021 On 4/27/2021 at 9:44 PM, Leeghoofd said: EDIT: Small update on the HWBot API and it works, thx Mat Thanks. It is working. But: the general problem is that the chipset detection is wrong. When submit 25M, the screenshot was taken incorrectly. Added the correct one manually. Quote Link to comment Share on other sites More sharing options...
_mat_ Posted May 2, 2021 Share Posted May 2, 2021 Please post the wrong screenshot so we can look into it. BenchMate doesn't show any chipset information. Where is that detection and what's wrong with it? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.