miker2ka Posted May 11, 2019 Share Posted May 11, 2019 Looking for ab good a2 kit that can do 4266 12.11.11 1t GB 3 on air and on apex 11. Link to comment Share on other sites More sharing options...
Guest Posted May 11, 2019 Share Posted May 11, 2019 (edited) A not bad option is to buy a retail kit of 4133c17, as they usually are pretty good. Edited May 13, 2019 by AutisticChris Link to comment Share on other sites More sharing options...
Fasttrack Posted May 11, 2019 Share Posted May 11, 2019 A2 pcb layout kits and Apex Motherboards are a no-no combination even for 4133 /12-11. All apex boards ( IX, X, XI ) do not cooperate well with A2 memory. On the contrary A2 kits ( if good ) can do 4700 up to 4800 on air, 14-13-13-28-2T, at least on Apex XI. You have to search for very high binned A1 kit that can go to 4266 / 12-11 / 1T, provided you have the IMC to support it. Link to comment Share on other sites More sharing options...
Guest Posted May 11, 2019 Share Posted May 11, 2019 @Fasttrack safedisk seems to have no issue, I'd fb message him how he gets it to work. I know a few other people got it working for them. Link to comment Share on other sites More sharing options...
Fasttrack Posted May 11, 2019 Share Posted May 11, 2019 On Asrock Mocf. Not Apex Link to comment Share on other sites More sharing options...
Guest Posted May 11, 2019 Share Posted May 11, 2019 (edited) @Fasttrack no, on Apex XI and Gene XI. Here's a few people who managed 4133 12-11 1t proper or more. I do recall some of the people say that it is more difficult than with A0-pcb, but to others it is no issue. https://m.facebook.com/story.php?story_fbid=2889814827696102&id=100000028401166 https://m.facebook.com/story.php?story_fbid=2544445725566029&id=100000018793280 https://m.facebook.com/story.php?story_fbid=1161718644010486&id=100005170833640 Edited May 11, 2019 by AutisticChris Link to comment Share on other sites More sharing options...
Administrators websmile Posted May 11, 2019 Administrators Share Posted May 11, 2019 As usually, people always talk about half of the topic and do not go into details that things changed - 4133c12 now works 1t on new BIOS-versions with tight settings because there is a new option (trace centering), and if you work with bclk you can go higher. Boot at 4200 divider and higher dividers only works 2T with some workaround settings. On top, you need a decent imc especially for bclk oc or good rma connections. Searching for a 4266 12-11 1t a2 kit is useless because chances you get there are extremely low when you have to work up from 4133. If BIOS-Versions improve more, then it could make sense because imho very good kits which do 4266 12-11 gb3 2T now will also succeed 1T at better conditions 3 1 Link to comment Share on other sites More sharing options...
Fasttrack Posted May 11, 2019 Share Posted May 11, 2019 26 minutes ago, websmile said: As usually, people always talk about half of the topic and do not go into details that things changed - 4133c12 now works 1t on new BIOS-versions with tight settings because there is a new option (trace centering), and if you work with bclk you can go higher. Boot at 4200 divider and higher dividers only works 2T with some workaround settings. On top, you need a decent imc especially for bclk oc or good rma connections. Searching for a 4266 12-11 1t a2 kit is useless because chances you get there are extremely low when you have to work up from 4133. If BIOS-Versions improve more, then it could make sense because imho very good kits which do 4266 12-11 gb3 2T now will also succeed 1T at better conditions As usual, @websmile ( Michael ), put things in their right perspective. Need to update my bios versions Michael. Still at 0903. Still nothing can beat though the Galax set doing 4200++ ultra tight ( where tight timings are a must ). And it is A1 layout Link to comment Share on other sites More sharing options...
miker2ka Posted May 12, 2019 Author Share Posted May 12, 2019 10 hours ago, websmile said: On top, you need a decent imc especially for bclk oc or good rma connections. 103 bclk seams that farfetched to you? I used 103 on crappy non k skylake cpus and on 8400 and 8700k. I thought it was resonable to asssume that 9900k would have no problem with 103. Link to comment Share on other sites More sharing options...
Administrators websmile Posted May 12, 2019 Administrators Share Posted May 12, 2019 Well I did 350 bclk on Pentium 4400 - but that might be a bit different when you use 4133 divider with c12 and 49/50rtls plus not all apex xi for example like this a lot 1 1 Link to comment Share on other sites More sharing options...
Guest Posted May 16, 2019 Share Posted May 16, 2019 @Fasttrack @websmile Now, I know this is not a majority case scenario. But, is this an example of 4266 ratio 12-11 1t? If it is, can we figure out how to replicate it? Link to comment Share on other sites More sharing options...
Administrators websmile Posted May 16, 2019 Administrators Share Posted May 16, 2019 This is nothing new, and sadly nothing is cleared - you need a 9th gen cpu for this to work - same as on apex x and old version of xp bios with 4133 divider with any layout. I already talked to an asus guy about this and think this will not change. Basically any a2 kit capable of doing 4266 will do this because it seems to be an RTL and iol issue. Let me know when this topic is really cleared because I refuse to spend my cash on useless i9 as you know 1 Link to comment Share on other sites More sharing options...
dumo Posted May 17, 2019 Share Posted May 17, 2019 (edited) On 5/16/2019 at 5:52 PM, AutisticChris said: @Fasttrack @websmile Now, I know this is not a majority case scenario. But, is this an example of 4266 ratio 12-11 1t? If it is, can we figure out how to replicate it? You need capable sticks to do it. I only have 4 b-die kits and only this one can boot up with 4266 12-11-11 1T tight and 4933 14-13-13 It is the same story since sandy bridge and P67.. Edited May 23, 2019 by dumo 1 Link to comment Share on other sites More sharing options...
suzuki Posted May 17, 2019 Share Posted May 17, 2019 Bro,how you are able to bench in single channel with tight timings ? I thought that was not possible anymore since impact viii. Is there a trick ? Which slot works best? Link to comment Share on other sites More sharing options...
Recommended Posts