bartx Posted December 1, 2019 Share Posted December 1, 2019 (edited) #1 Asus P5E3 Premium. Pulled from old high end PC, I think it was never overclocked considering the dried thermal paste below the stock cooler. Full BOX, only manual is missing, but I guess you won't need that Board is able to run 2000MHz 7-7-7 on double sided memory, which actually better than most Rampage Extreme which I had (only one was able to do it). It needs 1,75-1,77V on NB and very good airflow on chipset, that's all - no magic. PL9 on 2:1, as you can see on the screens. Board doesn't need any special tricks for FSB, I set only 0,67 for both CPU GTL. Validation on 626FSB (probably end of the CPU, considering the fact that it can run 620MHz Cinebench). https://valid.x86.fr/ewp6ct 150 euro + shipping (about 15 euro to most countries) #2 E8400 E0 Q827. Pulled from the same PC In my opinion can be good candidate for some nice scores, 4650 @ 1,55V Superpi 32M, and 626MHz FSB Valid. 15 euro + shipping (about 5 euro to most countries) #3 Celeron 450. Delided, IHS is loose, Kryonaut below the IHS. Silicon core lost a corner, but works without any problem. 4030MHz on Air as you can see, scales to 1,65V on air and runs hot (high leakage I think). There are some mine old scores on hwbot - made on autoscade in around - 65/67C https://hwbot.org/submission/3061271_bartx_gpupi_for_cpu___1b_celeron_450_1h_4min_21sec_887ms I think it's possible to do 5GHz on this chip on LN2 and get all the gold cups 25 euro + shipping (about 5 euro to most countries) PayPal - friends and family. All items guarantee not DOA. Edited December 24, 2019 by bartx Link to comment Share on other sites More sharing options...
bartx Posted December 3, 2019 Author Share Posted December 3, 2019 (edited) Price drop for P5E3 Premium - 140 euro + shipping I added some CH-5/BH-5 based RAM. 256MB sticks only. I tested mostly on Spi 8M. #4 Kit1 - does 255 2-2-2-5 3.6V - 25 euro #5 Kit2 - the best, one BH-5 stick, one CH-5 - does 270 2-2-2-5 3,6V (passes 32M, look on screen) - 35 euro #6 Kit3 - does 255 2-2-2-5 3.6V - 25 euro #7 Kit4 - two single Vdata and Twinmos sticks, I haven't tested them in dual - 10 euro per stick This RAM is VERY hard to get, at least in EU at this moment. I kept for myself two 512MB (I've found only three in total) and I'm selling the rest. Not to mention about those which are suitable only for the recycling Edited December 24, 2019 by bartx Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted December 3, 2019 Crew Share Posted December 3, 2019 I'll take kit 2 Bart Link to comment Share on other sites More sharing options...
ViNG Posted December 3, 2019 Share Posted December 3, 2019 PM (e8400 & c450) Link to comment Share on other sites More sharing options...
bartx Posted December 4, 2019 Author Share Posted December 4, 2019 P5E3 Premium & E8400 payment pending DDR Kit2 payment pending Link to comment Share on other sites More sharing options...
bartx Posted December 5, 2019 Author Share Posted December 5, 2019 P5E3 Premium & E8400 - sold Celeron 450 - sold Link to comment Share on other sites More sharing options...
bartx Posted December 8, 2019 Author Share Posted December 8, 2019 (edited) Added two 512MB Twinmos sticks (Winbond CH-5). Board or CPU IMC ends on 262MHz, so Stick 1 might clock better. #8 Stick 1 260 1,5-2-2-2 3,6V - 20 euro #9 Stick 2 250 2-2-2-5 3,6V - 10 euro Edited December 8, 2019 by bartx Link to comment Share on other sites More sharing options...
bartx Posted December 13, 2019 Author Share Posted December 13, 2019 bump for DDR1 Link to comment Share on other sites More sharing options...
wytiwx Posted December 22, 2019 Share Posted December 22, 2019 Nice P5E3-P, but normal E8400 I think Link to comment Share on other sites More sharing options...
bartx Posted December 24, 2019 Author Share Posted December 24, 2019 #5 Kit2 of DDR1 sold, rest stil available. Link to comment Share on other sites More sharing options...
bartx Posted December 29, 2019 Author Share Posted December 29, 2019 All sold. Thanks for the space Link to comment Share on other sites More sharing options...
Recommended Posts