SuperPi 32M

[Broken APEX49]

I don't understand how to create an OS

[GtiJason]

On 3/28/2021 at 8:54 PM, GTI-R said:

I don't understand how to create an OS

Not sure what issue you are having, You said in message that you did get the OS installed ? What's an SDD ? a hard drive
The Acronis .tib image / OS ?
You followed this guide, using the file (AcronisTrueImage.zip) from my previous post. Extract that and use the .ISO file to make a bootable Acronis drive
You can do this using Rufus or another program of your choice
Then you would just copy the the .tib file from Antome/Barbonenet in the APEX XII thread.
Boot to the usb drive you just made and select the .tib file

"Extract this folder and use a program like Rufus to make bootable flash drive using this True Image recovery iso 
Add the .tib image from thread above to the bootable flash drive, change boot order in Apex XII bios
and boot to flash drive Acronis True Image interface
Select the XP.tib file and restore. "

[Broken APEX49]

What is a bootable flash drive?
Is USB okay? Do you need a DVD drive?

[Broken APEX49]

I have never had such work experience
I'm also investigating programs such as Rufus and how to use Acronis, but it's ambiguous.

Edited April 1, 2021 by GTI-R

[Broken APEX49]

Every time every time
It will stop at the basic installation method and operation method
As a reason, there are many parts that are difficult to understand in the translation part.

[GtiJason]

Yes, just a USB thumb drive that's like 8gb or 16gb
No DVD drive needed

 

https://imgur.com/a/fZSdNQT

984935621_ImgurAlbumInstallXPfromtib.zip

Edited April 1, 2021 by GtiJason

[Broken APEX49]

I'm sorry I can't understand from the middle

[Broken APEX49]

Hello
It's done up to Rufus
I don't know the future
How do you proceed?

[Broken APEX49]

[TerraRaptor]

Press start to create bootable acronis media. Then copy *.tib image to usb. Then boot from USB and once acronis true image is launched, recover *.tib image following wizard steps.

[Broken APEX49]

Where is the tib image?
What is copy to USB?
Is USB the one that created Acronis Media?

[Broken APEX49]

Created Acronis Media
The inside of usb looks like this
Is it correct so far?

[Broken APEX49]

I don't know what the next step is.

I'm ashamed of myself.

[GtiJason]

2 hours ago, GTI-R said:

I don't know what the next step is.

I'm ashamed of myself.

Don't be, and USB looks good.
Now just add the Acronis .tib file to the Root of the USB and boot to it

[GtiJason]

This one

Xp32bit_SPI32M_Z390allusb .tib

https://mega.nz/file/WVB1yaDL#H9NZEYW0sfm_JSLmKOzWCXPQyJ1uVMxgW1bMTngoQto

 

You can just copy it over, no need for special program
Just add the file, go into bios and change boot order to usb

Edited April 3, 2021 by GtiJason

[Broken APEX49]

Thanks to your help, I managed to boot XP.
However, the WAZA folder, etc. does not exist.
What should I do now?

Edited April 3, 2021 by GTI-R

[GtiJason]

The Run.bat file will start wahaha! then do waza cdt, c to d, d to c, c to d, d to c.
It should set affinity, set realtime, open Super Pi and close explorer

1) You need to copy wahaha!.exe to C:\Windows\System32
    It is included in Super Pi folder I uploaded

2) You can create Waza folder using OCX SPiTweaker 1.08 / also included
    Try 1200 C - D 1024

3) Remember you will need a 2nd partition for D:\ drive or a 2nd SSD / HDD

Control Panel -> Administrative Tools -> Computer Management -> Disk Management -> Select the empty partition immediately after the disk C : -> Right-click and create the new partition D : (it will be used for copywaza, if there is no empty partition you might need to shrink partition first ). 

Easy way to do this since the bench OS has most Services and Windows Features turned off is to connect this XP Bench drive to another computer. I like to use USB2.0/3.0 to SATA cable.
On this PC I'll have installed MiniTool Partition Wizard Free 9.1 (or similar) since it allows you to make whatever kind of changes you want

Super Pi.zip

Edited April 4, 2021 by GtiJason

[Broken APEX49]

I'm not sure I understand all of your explanation.
Do you boot into a system for OC with Windows 10 and then connect an SSD with Windows XP installed to use it?
By the way, I am using something like the picture.
I can connect the SSD externally via USB.
Is this okay?
And Mini tool Partition Wizard free9.1?

[GtiJason]

I only suggested using a daily OS something like windows 10 if you are having problems making a 2nd partition for waza
I also mentioned I prefer to do this using USB 2.0/3.0 to Sata (the Win XP ssd)

 

[GtiJason]

 

[Broken APEX49]

 Thank you for your consideration.

[Broken APEX49]

The 2nd.
The 3rd way can't be understood.
Work isn't developed.
A partition isn't understood in particular.
A D drive exists already.
Is it increased?
A D drive, two partition?
When can't it be operated?

[Broken APEX49]

[Broken APEX49]

also included
    Try 1200 C - D 1024？

This isn't also understood well.

[Leeghoofd]

its the value you can set in OCX SPi tweaker for the wazaa.

 

If ever you break a WR with the tips from GTIJason, I hope you will put his name in the comment box