mcmanus9442 Posted March 24 Posted March 24 I have a 12300 (ES) on my apex encore that gets stuck at post code 55. Works fine with any other CPU. Do i need a special bios or ME for this to work? This CPU previously worked fine on a z690 aqua. Quote
Mr. Fox Posted March 26 Posted March 26 Strange code to see... it is gnerally related to memory. 1 Quote
tomekmak Posted May 2 Posted May 2 Can some1 share working link to bios for Z790 Apex (not encore) with posibility to oveclock non-K cpu's ? Quote
Zeeray03 Posted May 3 Posted May 3 new to overclocking is this OC good? I think im running into issue with ram stability due to the board getting to cold what yall think? Quote
unityofsaints Posted May 17 Posted May 17 Memtweakit Dropbox link in the OP is dead, can it be reposted? Thanks. Quote
Seby Posted May 17 Posted May 17 28 minutes ago, unityofsaints said: Memtweakit Dropbox link in the OP is dead, can it be reposted? Thanks. https://drive.google.com/file/d/1ez7KYo6CGTkVmKIdGhS3EBokUuBO1N_q/view?usp=sharing Latest MemTweakIt (fixes 14700K) 1 Quote
Farjam Posted May 19 Posted May 19 Hi, Is there any non K overclock bios for Z790 Apex Encore? I mean I have checked the prev pages but the links are dead as me without a gallon of coffee Thank you. Quote
safedisk Posted May 24 Posted May 24 Z790 APEX ENCORE/ Z790 APEX TEST BIOS 9909 1. need ln2 mode enabled and mode2 if use gear 4 dont use mode 2 (Only used in xoc) 2. can switch 11F ucode in bios ROG MAXIMUS Z790 APEX TEST BIOS 9909 (Based on 2301) https://drive.google.com/file/d/15bS_sd5u9s22YBPoc7dRHqnqE2d28jJr/view?usp=sharing ROG MAXIMUS Z790 APEX ENCORE TEST BIOS 9909 (Based on 1301) https://drive.google.com/file/d/11iGXXHas5dq-gjjVG9cI0p20iVMOzonj/view?usp=sharing 1 2 Quote
safedisk Posted May 24 Posted May 24 On 5/20/2024 at 7:44 AM, Farjam said: Hi, Is there any non K overclock bios for Z790 Apex Encore? I mean I have checked the prev pages but the links are dead as me without a gallon of coffee Thank you. hey here https://drive.google.com/file/d/10RV0QoOnjAItzxW7xwmpU5wVKB5d5Cy3/view?usp=sharing 1 3 Quote
LunerK9 Posted May 27 Posted May 27 Is there a newer bios than 0070 for the Encore that supports 3 and 4 way xfire? No matter what version i try i get a d4 error Quote
Seby Posted May 27 Posted May 27 ROG MAXIMUS Z790 APEX 9909 for 3+ GPUS (Must use USB BIOS Flashback, rename to MZ790A.CAP) ROG MAXIMUS Z790 APEX ENCORE 9909 for 3+ GPUS (Must use USB BIOS Flashback, rename to A5470.CAP) Let me know if these work 1 1 Quote
LunerK9 Posted May 28 Posted May 28 The encore Bios doesnt work for me as im still getting the d4 error I used the flashback method, it did have the normal 9909 on there beforehand if that somehow causes an issue Quote
Seby Posted May 28 Posted May 28 Hmm okay, I will test it later today https://drive.google.com/file/d/15QqNswqx0Q9EClIuAq0ifLXyBItVasFJ/view?usp=sharing this one is known good, just wanted to make one based off the latest 1 1 Quote
LunerK9 Posted May 28 Posted May 28 25 minutes ago, Seby said: Hmm okay, I will test it later today https://drive.google.com/file/d/15QqNswqx0Q9EClIuAq0ifLXyBItVasFJ/view?usp=sharing this one is known good, just wanted to make one based off the latest Yes this one works for me, Thanks Seby Quote
Farjam Posted June 1 Posted June 1 On 5/24/2024 at 12:17 PM, safedisk said: hey here https://drive.google.com/file/d/10RV0QoOnjAItzxW7xwmpU5wVKB5d5Cy3/view?usp=sharing Thank you, Really helped me out 🙏 Quote
Farjam Posted June 24 Posted June 24 (edited) Hello again Is there is known issue with LN2 jumper on Z790 Apex encore? keep getting 55 code right after enabling it (no matter the temperature) or CPUs, tried 4-5 different BIOS with 14900k,14900kf and 13700k with no luck, only 5% of the times it boot to windows with LN2 jumper enabled but at the next restart it stuck on 55 again. Am I doing something wrong? Edited June 24 by Farjam Quote
Seby Posted June 24 Posted June 24 (edited) Make sure RSVD_1 and RSVD_2 switch are set to Off Edit: Actually having it boot ever is weird if you were to have RSVD_2 enabled, I guess also make sure to not be using Maximus Tweak Mode 2, as this loads skews that only work well at ln2 temp. Edited June 24 by Seby 4 Quote
Farjam Posted June 24 Posted June 24 (edited) 2 hours ago, Seby said: Make sure RSVD_1 and RSVD_2 switch are set to Off Edit: Actually having it boot ever is weird if you were to have RSVD_2 enabled, I guess also make sure to not be using Maximus Tweak Mode 2, as this loads skews that only work well at ln2 temp. Thank you It's been a frustrating week as all my 14XX chips had cold bug around -100 (and even one around -80), after all maybe I can enjoy a full pot 13700k this week lol Edited June 24 by Farjam Quote
Seby Posted June 24 Posted June 24 12 minutes ago, Farjam said: Thank you It's been a frustrating week as all my 14XX chips had cold bug around -100 (and even one around -80), after all maybe I can enjoy a full pot 13700k this week lol Very warm hmm, try leave memory settings all auto, only set FLL OC Mode to Ratio OC, disable ecores, set vcore and core ratio, and apply settings when cpu is at -100 so that you don't change cpu temp too much after training mem. Then see how cold you can go in OS. If you have a cold bug, then raise CPU Input Voltage, first to 2.3 to see if it makes any difference. You can try up to 2.7 if it does help. 2 Quote
safedisk Posted June 27 Posted June 27 Z790 APEX ENCORE/ Z790 APEX TEST BIOS 9922 For XOC 1. need ln2 mode enabled and mode2 if use gear 4 dont use mode 2 (dont use ambient temp OC, only use to LN2 OC) 2. can switch 11F ucode in bios https://rog-forum.asus.com/t5/intel-700-600-series/raptorlake-resources/m-p/1025284/highlight/true#M23653 1 3 Quote
joe90br Posted June 30 Posted June 30 Hi, Is it possible to use Windosw Xp in Apex Encore? I connected ssd that used in my Z690 Apex, but freeze and show blue screen. Is it necessary change for other acpi.sys file? Quote
Seby Posted June 30 Posted June 30 49 minutes ago, joe90br said: Hi, Is it possible to use Windosw Xp in Apex Encore? I connected ssd that used in my Z690 Apex, but freeze and show blue screen. Is it necessary change for other acpi.sys file? Boot with Z690 Apex, open device manager, install these drivers to all devices that are missing drivers. Then boot with Z790 Apex Encore. You will need PS/2 probably to reinstall USB drivers. https://www.mediafire.com/file/dap6k6n96t27l1a/DP_Ported_DriversCollection_v24.7z/file Thanks to George King on MSFN 2 2 Quote
joe90br Posted June 30 Posted June 30 19 minutes ago, Seby said: Boot with Z690 Apex, open device manager, install these drivers to all devices that are missing drivers. Then boot with Z790 Apex Encore. You will need PS/2 probably to reinstall USB drivers. https://www.mediafire.com/file/dap6k6n96t27l1a/DP_Ported_DriversCollection_v24.7z/file Thanks to George King on MSFN Thanks for support! Have a nice day! 1 Quote
joe90br Posted July 3 Posted July 3 My Z690 Apex have one bug with memory frequency. I never got frequency above of 7000 with 14th generation and 6000 with 12th generation. I bought one Apex Encore and frequency 8000 is possible now. I want to use memory above of 8000. What the best voltage settings using only heatsinks and using LN2? Thanks! Quote
Seby Posted July 23 Posted July 23 (edited) UNOFFICIAL BIOS for Z790 Apex Encore and Z790 Apex I made to fix Multicore Enhancement not working on the laptop CPUs. Also adds AVX-512 Microcode for 12th gen, and fixes tri/quadfire. Must use USB BIOS Flashback - First boot might take a long time, I think it might be because of the custom bios name, but don't worry about it. If you get d4, just reboot. Z790 Apex Encore 9905 Laptop MCE Fix (Rename to A5470.CAP) Z790 Apex 9905 Laptop MCE Fix (Rename to MZ790A.CAP) Alternatively, you can use XTU to remove power limits. Edited July 23 by Seby 1 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.