Christian Ney Posted April 19, 2011 Author Posted April 19, 2011 And don't forget to CLEAR CMOS BTW yamahar1's submissions have been blocked or removed, why OcGenie's ones not ? Quote
yamahar1 Posted April 19, 2011 Posted April 19, 2011 in the oc genie video the yellow worlds oc enable on start up does not exist. can you see that? is valid? Quote
Massman Posted April 19, 2011 Posted April 19, 2011 Clear CMOS is not necessary. On my board, OC Genie changed my overclocked settings. Quote
yamahar1 Posted April 19, 2011 Posted April 19, 2011 And don't forget to CLEAR CMOS BTW yamahar1's submissions have been blocked or removed, why OcGenie's ones not ? yes. Quote
Massman Posted April 19, 2011 Posted April 19, 2011 in the oc genie video the yellow worlds oc enable on start up does not exist. can you see that? is valid? OC Genie button is enabled, but OC Genie didn't overclock the system because it can only do so after power off/on. Quote
LeGaL^CriMeR Posted April 19, 2011 Posted April 19, 2011 Congratulations to Christian Ney:) As I wrote on the back, it is impossible the same processor clock them differently! People like yamahar1 should be removed from HWBOT. Quote
yamahar1 Posted April 19, 2011 Posted April 19, 2011 Clear CMOS is not necessary. On my board, OC Genie changed my overclocked settings. do you have 875k? Quote
Christian Ney Posted April 19, 2011 Author Posted April 19, 2011 Clear CMOS is not necessary. On my board, OC Genie changed my overclocked settings. Ok maybe, I don't know I haven't tested myself but anyway it's better to be legit. And you do it on your video so... Quote
Massman Posted April 19, 2011 Posted April 19, 2011 And don't forget to CLEAR CMOS BTW yamahar1's submissions have been blocked or removed, why OcGenie's ones not ? My apoligies, just removed the questionable results. Quote
LeGaL^CriMeR Posted April 19, 2011 Posted April 19, 2011 Now having looked in the video posted by OcGenie, I noticed that he also has not given CLR_CMOS. Or at least to load settings from BIOS default. If wrong correct me. Quote
Christian Ney Posted April 19, 2011 Author Posted April 19, 2011 Yes he didn't but as massman said it's ok OC Genie take the advantage and do the overclock himself without CLR_CMOS My apoligies, just removed the questionable results. My bad, I haven't seen that those were other results than the one we talked before, so you removed the good one :thumbsup: Quote
Massman Posted April 19, 2011 Posted April 19, 2011 Is it normal that in OcGenie's video there is no message visible that OC Genie is enabled when the full logo is disabled? Quote
Christian Ney Posted April 19, 2011 Author Posted April 19, 2011 On the 2 other videos I ''approved'' the OC Genie logo is showed... Will check again the new OcGenie's video Quote
Massman Posted April 19, 2011 Posted April 19, 2011 Looks like he disabled OC Genie functionality in the BIOS before taking the video. Pressing the OC Genie button if you have disabled OC Genie functionality has no effect, but I think P55 boards show it in the full logo anyway. Quote
Christian Ney Posted April 19, 2011 Author Posted April 19, 2011 (edited) Hum, imo as he hasn't filmed the full monitor, the logo is out of his video camera ? At the bottom EDIT: And according to other videos, his computer boots very fast like there is no OC Genie tests ... (aka time that OC Genie find the best values to overclock the rig) Edited April 19, 2011 by Christian Ney Quote
LeGaL^CriMeR Posted April 19, 2011 Posted April 19, 2011 (edited) When I was stopped when the option from the BIOS (OC GENIE), even if it is pressed, your logo is normal and is off option ocgenie But in the case of "OCGENIE", he neither set of BIOS defaults, neither shows the inscription that appears after activating ocgenie. I do not know whether it is in the rules but is full of darkness. Also as seen from my clip, then press the button and start OCGenie system has at least 10 seconds while waiting OCgenie overclocking the CPU. Edited April 19, 2011 by LeGaL^CriMeR Quote
johnamd Posted April 19, 2011 Posted April 19, 2011 my frieds use intiliti (controlcenter)look it please massman (two reboot don t yellow oc genie .look) I tried with 875k Quote
johnamd Posted April 19, 2011 Posted April 19, 2011 The member oc Genie is out of rules again. because he doesnt clear mos. we can see this on first boot, the frequency on the system is 4.180ghz and he don't ghange the controler IDE=> AHCI. im sorry for all this!!!! Thank you! Quote
04ahgy Posted April 21, 2011 Posted April 21, 2011 Hello! Having problems submitting for stage 2. Pressing submit button gives error message (all required fields are filled, double checked) competition limitation: your submission is incomplete Youtube video is required. ???en.exception_unkown.youtube.movie??? message appears near the youtube URL textbox. But I have a valid Youtube video, here: It seems that HWBOT engine does not like the URL for some reason. Please help me. HGyu Quote
LeGaL^CriMeR Posted April 21, 2011 Posted April 21, 2011 @04ahgy Sorry but. The two videos that you did not have the rules Quote
04ahgy Posted April 21, 2011 Posted April 21, 2011 It worked with the CPU-Z submission? Yes, it worked. The Stage 2 one not worked. The procedure was the same, OS linux kernel 2.6.26.1, debian etch, firefox 3.5. I will try it using some win machine later. @LeGaL^CriMeR: Please tell me the very exact details, what rules are violated. Lets focus on the first video, the only one (for just now) valid submission. Rules are: # The video must show the entire overclocking process, including: — power off - true. Can be clearly seen that CLRCMOS jumper had been shorted, system boots at default settings, claiming at the post screen: CMOS Settings wrong. Entering setup, disabling full srceern logo, saving. After booting, poweroff occurred via touch button. — pressing OC Genie button - clearly visible the pressing, and pressed button. — post (with displaying operating frequency!) - poweron via touch button, system waits for about a dozen of seconds, post occurs at OCGenie managed frequency. — boot in windows - The whole time visible. — clearly show official Wallpaper + CPU-Z tabs (CPU, mainboard and memory) - The whole time visible. — (for SuperPI-32M: clearly show first 5 loops and while CPU-Z CPU tab is open)- The whole time visible. Quote
04ahgy Posted April 21, 2011 Posted April 21, 2011 @04ahgySorry but. The two videos that you did not have the rules Sorry to mention that, it seems you have some misunderstandings about the competition and the stages. At my submission into Stage1, you commented: "LeGaL^CriMeR: No results from Super PI!!! " Of course, not. That stage is about CPU-Z valid. Second stage is about SuperPi. There is no rule, mentioning that all of the two stages have to be submitten simultaneously. Quote
LeGaL^CriMeR Posted April 22, 2011 Posted April 22, 2011 (edited) Sorry my mistake:) Obviously the first stage and can no super pi. But I think it is good to have it both and the clip is the same. Because we are all uploaded the same clip, and so easy anyone can upload a fraud if a different clip. ---------------- for your problem. Otherwise, and I had problems with uploading video and score at the second level, I wrote a little further back how I fixed the problem. Edited April 22, 2011 by LeGaL^CriMeR Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.