saint19 Posted September 22, 2012 Posted September 22, 2012 Polish energy drinks In otherd words...beer. Quote
Quake Posted September 22, 2012 Posted September 22, 2012 We tried new BIOSes yesterday, 1830/1770... Memory sucks Quote
matose Posted September 22, 2012 Posted September 22, 2012 That's not bad, it was full pot? How many volts in GPU and MEM? Quote
Quake Posted September 23, 2012 Posted September 23, 2012 Nope, it was at ~ -90, -100°C, 1.61v GPU, 1.72v MEM Quote
matose Posted September 23, 2012 Posted September 23, 2012 Tried higher vmem and check if you can go over 1800MHz? Quote
Xtreme Addict Posted September 23, 2012 Posted September 23, 2012 GPU not bad! but memories should be better Quote
Splave Posted September 23, 2012 Posted September 23, 2012 (edited) same here -115cb but mem goes just shy of 1900 somethings strange though with my card, I loose screen and bench continues like 7970 lol anyone else? @ 1.6v 1880/1880 seems to be about it for 11...cpu only at 5ghz so could be a bit lower max but not bad...sucks to be around -100c though Edited September 23, 2012 by Splave Quote
Crew Vivi Posted September 23, 2012 Crew Posted September 23, 2012 2000 / 1900 3d11 1.75v and -135 Too bad its not our moa card daaaamit Quote
Splave Posted September 23, 2012 Posted September 23, 2012 (edited) damn 1.75v!! crazy man you guys using the reactor? Edited September 23, 2012 by Splave Quote
Xtreme Addict Posted September 23, 2012 Posted September 23, 2012 2000 / 1900 3d11 1.75v and -135 Too bad its not our moa card daaaamit 1.75v is for GPU or memories? Quote
Crew Vivi Posted September 23, 2012 Crew Posted September 23, 2012 1,75 gpu ofcourse Reactor was used too Quote
Xtreme Addict Posted September 23, 2012 Posted September 23, 2012 I really surrender, how you enabled 1.75v when all we are limited to 1.62v? maybe only some batch of cards has this issue... Quote
Crew Vivi Posted September 23, 2012 Crew Posted September 23, 2012 What volt does your slider get stuck? Mine just keep going Quote
T0lsty Posted September 23, 2012 Posted September 23, 2012 my card can do 1800/1800 1.66V on gpu -90 1.75V dont help to go higher (( does anybody can launch NVIDIA Inspector and NVPMManage under XP ? Quote
Xtreme Addict Posted September 23, 2012 Posted September 23, 2012 I don;t get how you can set 1.75v... you need to install netframe 2.0 Quote
Xtreme Addict Posted September 23, 2012 Posted September 23, 2012 I hardmoded it and still 1.62v limit in abx... Quote
T0lsty Posted September 23, 2012 Posted September 23, 2012 (edited) not that mods than msi send us. just use VR on FB pin Edited September 23, 2012 by T0lsty Quote
Xtreme Addict Posted September 23, 2012 Posted September 23, 2012 You mean this pin 4 (that right pin from resistor which we had to desolder) to ground? Quote
Lucky_n00b Posted September 23, 2012 Posted September 23, 2012 @ T0lsty : If it's possible, can you please show me how did you do the mods? Is pin 4 of the chil 8318 responsible for the feedback? (it says 'vcpu" on the datasheet, not sure if i'm getting the right pin) Thanks, Quote
Massman Posted September 24, 2012 Posted September 24, 2012 somethings strange though with my card, I loose screen and bench continues like 7970 lol anyone else? Using VGA cable? Quote
Splave Posted September 24, 2012 Posted September 24, 2012 Using VGA cable? figured that one out lol dont worry about volts, the tool we get will provide infinite amount and you will just taint your GPU at home Quote
Crew Vivi Posted September 24, 2012 Crew Posted September 24, 2012 (edited) Drweez and I figured out the mod for our LOC. Its just a normal vmod. 1 trimpot and no other mods got us to 2000 so not sure why any other mods are needed for moa. Not sure why they going for laptops lol! We'll post it later today. Can go to 1.9 if you really want. No ovp, no ocp. Just vmod goodness Edited September 24, 2012 by Vivi Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.