General hardware discussion

I have a new GPU that isn't on HWBot who do I need to contact to get it added?

i have a P4SC motherboatd,but i khan not find it on the asus site where khan i find drivers and bios for this bord this bord is used in a ASUS Terminator P4 PC Desktop the problems ar whit a Pentium 4 1800 Mhz the bord works but somtimes it reboot now and than whit a pentium 4 3066 Mhz the bord runs the cpu at 1600 Mhz max and it also reboot now and than and i have problems whit the onbord-sound

Please set this CPU, that i can Upload my Results, i can´t find it yet on hwbot...

Hi guys, in this last day are available the new xeon 1366 w3520 and w3540 Maybe is better insert it in the family of Core i7 thanks

hello whats wrong with 2x 4850 ranking in vantage http://hwbot.org/searchResults.do?direction=&applicationId=17&teamId=0&userName=&gpu=Radeon+HD+4850+(1599)&numberOfVideocards=2&cpu=&chipset=&model=&manufacturer=&minScore=&maxScore=&gpuId=1362&cpuId=0&chipsetId=0&modelId=0&manufacturerId=0&offset=0&displayAdvanced=false&countryId=0&dateFrom=&dateUntil=&minGpuCoreFreq=&maxGpuCoreFreq=&minGpuMemFreq=&maxGpuMemFreq=&minCpuFreq=&maxCpuFreq=&system=&minTotalPoints= hier it starts from 3rd place whats wrong here?

Heya Just read on VR-Zone that nvidia plans to rename the 9800GTX+ into GTS 250. They won't change any specifications. Will hwbot list the GTS 250 as 9800GTX+ or will it be a new category? Regards der8auer

Wondered why there was no listings for the BlackEd Athlon chips? Do we consider them, like, as a "normal" 5000+?

I have just tried to boot with my new QX9770 and DFI LT X48 board and this memory. No boot into BIOS with the stock voltages ... I have tried upping the NB and DRAM voltages, but still a no-go ... any ideas? I have posted over DFI-Club and will do so at OCZ, but just wanted to see if there is anyone here who has used this memory or has heard of a trick to get this RAM to post in a Intel X48 board ...

http://www.hwbot.org/compare.do?resultId=805093 Krokkato: reported by user due to lack of validation (GPU-z missing!!!), , -GPU-Z/ No support- lol : http://www.hwbot.org/compare.do?resultId=834184 :)

Which one is better?? What the different ? Give some reason.. Thanks..

http://valid.canardpc.com/show_oc.php?id=513469 here THL has done 5GHz+ OK here raja has the same result http://valid.canardpc.com/show_oc.php?id=505027 can anybody see the difference??? raja was using standart and lowest QPI multi avaiable =18X and THL? he has 12X???? how was that possible not even DFI club support can explain that http://csd.dficlub.org/forum/showthread.php?t=9755 raja has 238bclkX21@4.1GHz+ QPI its normal THL has 238X21@2.8GHz+ QPi its anomaly or just bugged THL: 238.63 bclk QPI 2863.6 lets calculate 2863.6/238.63=12X multi raja has lowest possible 238.48 bclk QPi 4292.6 4292.…

Hello guys, I´ve got a Celeron LGA775 330. CPU-Z says. Easytune by Gigabyte says it´s an 330J. hwbot has both. In the internet I read that the 330J has -Bit the 330 not. How can I differ them for uploading scores? greetz

Member, Phant0m: reported by user due to wrong hardware match (64bit, 128mb, for 5700VE, but in screen 128bit 256mb! it is 5700LE category !!!) not 5700LE it is 5700 VE http://www.hwbot.org/searchResults.do?direction=&applicationId=0&teamId=0&userName=&gpu=GeForce+FX+5700+VE+%2822%29&numberOfVideocards=0&cpu=&chipset=&model=&manufacturer=&minScore=&maxScore=&gpuId=880&cpuId=0&chipsetId=0&modelId=0&manufacturerId=0&offset=0&displayAdvanced=false&countryId=0&dateFrom=&dateUntil=&minGpuCoreFreq=&maxGpuCoreFreq=&minGpuMemFreq=&maxGpuMemFreq=&minCpuFreq=&maxCpu…

well i had a free time and i overclocked my E8400 E0 On Ninja 2 with Push Pins here is validation http://valid.canardpc.com/show_oc.php?id=525016 so what you will say ? is it normal overclock ?

9600GT με DirectX 11 σε Windows 7 Ultimate x64

hi all! i searched forum but found no answer,in which category to move my results,when you got 98gtx and 98gtx+,or gtx260 and gtx260+(216). there are a lot of points to gain when put in the other category. i did put my vantageresult with one old bfg98gtx and one new 9800gtx+ in "gtx" section. better place would be in "+" section. thanks for your help in advance

When you look at the results of this user here:http://www.hwbot.org/user.do?userId=16770 you can see that he is cheating. He has always the same results with an Xeon 2.4GHz and a Xeon 2.4GHz (fsb533) and also the Screenshoots are exactly the same, and also the CPU-Z Validation is not from him. Can anybody here from the Crew check this results?

hi all i wanted to compete to some core i7 940 extreme scores, but figured out, the cpu is only ES, not available to buy officially.... so why the cpu is listed in hwbot? thanks for explanation. (btw: this request has nothing to do with the people who published the scores - trust me: its nothing about you - im just curious how people should compete with you)

Hello guys! I got some questions witch i coudnt find using the search option, but will undoubtfull be somewhere in this forum. I hope one of you can help me awnser my questions. Ive got my E8400 running @525*8 4.2Ghz. Its Orthos stable for 6hours. thos my temps are according (taking an avarage) to Coretemp and Realtemp Max 67c. Is this to hot for a E8400 on Air?(Scyte Mugen). I got the NB on 1.45 and the vCore on 1.4500. Mem (OCZ Reapers CL5 on 5-5-5-15 2.1v). Trying to lower the vCore to get some lower temps tho. So, can i keep running those temps for 24/7? Are these some decent clocks? Thnx in advance.

I know its old hardware, but its still fun to overclock with. The only problem with Pentium 1 and AMD k6 is that the CPUz info changes if you overclock. So you can never be 100% sure its the CPU the say it it: http://valid.canardpc.com/show_oc.php?id=413751 Anyone knows what CPU this is ? So its a "heaven" for cheaters . Some overclockers already have a picture of the CPUs with there score's. So I don't know if we can make some kind of rule or something?

what do you know about this card? can you tell me something about the way that i am going to overclock it? baybe some tricks?

Hallo, leider finde ich keinen Ansprechpartner für mein Problem. Habe meinen AMD 6000+ (65nm) mit der Validation von CPUZ bei submit score eingetragen. Dieser steht aber in der falschen Liste, nämlich in der CPU Liste von der 6000+ (90nm) Reihe mit Windsor Kern!!!!! An wehm kann ich mich da wenden, oder bin ich hier sogar richtig?

http://valid.x86-secret.com/show_oc.php?id=451714 @ default.

Please add Core 2 Mobile T2410 CPU to database !!! Specs: 2x Merom core, 2000 MHz clock speed, 533MHz FSB speed, 2x1024Kb L2 cache, Socket P(478). Screen with CPUZ: http://valid.x86-secret.com/show_oc.php?id=449151

how come i dont get points for my i7 results? http://hwbot.org/result.do?resultId=789632 http://hwbot.org/result.do?resultId=789634