Splave

the new gskill kits have folding dimms i heard? for smaller packaging just apply pressure lol

Rule benching company-CEO

What do they do r15 at voltage wise for 4.5ghz

CN is on the case seems you can bug xtu if its really unstable. That's why you see guys using air cooling and low cache If anyone can run 1800+ at any memory setting with core at 5ghz and cache under 4.9ghz I will eat my best chip.

That chip sounds pretty bad. I'd say 4.7-5.0 air then go cold

ah ok not that I know of will ask

timing config? or formula drive?

If you as in this thread OCF if you ask in asus thread impact quick tip if you are running 32m and pi window disappears try raising vccio first

Ready for broadwell-e party!

you can also clean the dimm gold fingers with alcohol they get dirty and signal is weaker

are those Popsicle sticks bro?

hey guys if you have random double booting or haning on 19 alot or full shut downs when you just change something like voltages and bclk try to reflash the MEI in the bios and should fix it. Gets corrupted sometimes it seems or maybe just me. lol

4800 done!

When you throw away video cards that work fine but dont have the right brand mem ic on it

booom!!!

Is that a Yukon Gold?

Pieter it's like eating your vegetables. No one wants to do it but it does the body good.

Invest in one of these makes it much easier

big board doesnt have those voltages mate, MOCF is better than big one by far

auto rules will switch it over to non K oc mode once you set over 103 bclk smart!

http://forum.hwbot.org/showthread.php?t=156368

$200

KABY Updates BIOS http://picx.xfastest.com/nickshih/asrock/Z17MOCF721B.rar AFD http://picx.xfastest.com/nickshih/asrock/AFDSetup(v3.0.92.2).rar ASRock Offical Website ASRock > Z170M OC Formula NEWEGG ASRock Z170M Extreme4 LGA 1151 Intel Z170 HDMI SATA 6Gb/s USB 3.1 USB 3.0 Micro ATX Intel Motherboard - Newegg.com TOOLZ http://picx.xfastest.com/nickshih/asrock/Z170ocftool20160421.rar BIOS http://picx.xfastest.com/nickshih/asrock/Z17MOCF121B.rar http://picx.xfastest.com/nickshih/asrock/Z17MOCF131.zip Quick Tips (thanks for easier to read version gti) ::Cold Bug Killer Settings 1.6 VCORE 1.4 VCCIO 1.4 VCCSA 1.65 CPU PLL Voltage 1.4 VCCPLL 2.22vColdBugKillerVolt 1.5 DMI Voltage ^These settings work for %90 of CPUs IF you still have CB then raise VCCPLL to 1.5 then raise Cold Bug Killer Volt to 2.4. Some CPUs need up to 1.8 DMI Voltage for any issues with PCIE Gen 3 but try lower first. FIDINGS ::Setting RTL manually by hand is easy type in what you want. B-die 4000mhz C12 tCWL9 try 49/50/6/6 or 50/50/7/6 or 50/51/7/7 or 51/51/8/7 Troubleshooting ::Post codes 00 Cold boot bug, needs warmer -Seems most around -100c to -120c for CBB 00 RTL failed -AC Off and Clear CMOS 00 CPU dead -Buy a new one 19 RTL/Mem failure -Try different RTL / timing or different vdimm or VCCSA 23 RTL/Mem failure -Try different RTL / timing or different vdimm or VCCSA 32 RTL/Mem failure -Try different RTL / timing or different vdimm or VCCSA 35 RTL/Mem failure -Try different RTL / timing or different vdimm or VCCSA 55 RTL/Mem failure -Try different RTL / timing or different vdimm or VCCSA b2 RTL/Mem failure -Try different RTL / timing or different vdimm or VCCSA 78 RTL too tight or tRCD too tight on b-die -try looser memory or RTL ab After saving settings in bios -Just wait will take up to 10 seconds sometimes :: Dual Core Locked CPU Benching -Use Micro Code 2D or 74 in CPU Settings page -Boot BCLK as high as you can, you are limited by the amount you can raise in the OS -Best option is to save a profile around 130 bclk and apply it and go back to bios. Then cool down cpu in bios and apply your higher voltage and bclk only dont touch anything that will cause a full cold boot. When it fails pull the 24 pin and warm up to you CBB setting then plug 24 pin back in and go into bios. Load your 130bclk profile again apply and go back into bios and pull cpu back down again.