Splave

KABY Updates BIOS http://picx.xfastest.com/nickshih/asrock/Z17MOCF721B.rar AFD http://picx.xfastest.com/nickshih/asrock/AFDSetup(v3.0.92.2).rar ASRock Offical Website ASRock > Z170M OC Formula NEWEGG ASRock Z170M Extreme4 LGA 1151 Intel Z170 HDMI SATA 6Gb/s USB 3.1 USB 3.0 Micro ATX Intel Motherboard - Newegg.com TOOLZ http://picx.xfastest.com/nickshih/asrock/Z170ocftool20160421.rar BIOS http://picx.xfastest.com/nickshih/asrock/Z17MOCF121B.rar http://picx.xfastest.com/nickshih/asrock/Z17MOCF131.zip Quick Tips (thanks for easier to read version gti) ::Cold Bug Killer Settings 1.6 VCORE 1.4 VCCIO 1.4 VCCSA 1.65 CPU PLL Voltage 1.4 VCCPLL 2.22vColdBugKillerVolt 1.5 DMI Voltage ^These settings work for %90 of CPUs IF you still have CB then raise VCCPLL to 1.5 then raise Cold Bug Killer Volt to 2.4. Some CPUs need up to 1.8 DMI Voltage for any issues with PCIE Gen 3 but try lower first. FIDINGS ::Setting RTL manually by hand is easy type in what you want. B-die 4000mhz C12 tCWL9 try 49/50/6/6 or 50/50/7/6 or 50/51/7/7 or 51/51/8/7 Troubleshooting ::Post codes 00 Cold boot bug, needs warmer -Seems most around -100c to -120c for CBB 00 RTL failed -AC Off and Clear CMOS 00 CPU dead -Buy a new one 19 RTL/Mem failure -Try different RTL / timing or different vdimm or VCCSA 23 RTL/Mem failure -Try different RTL / timing or different vdimm or VCCSA 32 RTL/Mem failure -Try different RTL / timing or different vdimm or VCCSA 35 RTL/Mem failure -Try different RTL / timing or different vdimm or VCCSA 55 RTL/Mem failure -Try different RTL / timing or different vdimm or VCCSA b2 RTL/Mem failure -Try different RTL / timing or different vdimm or VCCSA 78 RTL too tight or tRCD too tight on b-die -try looser memory or RTL ab After saving settings in bios -Just wait will take up to 10 seconds sometimes :: Dual Core Locked CPU Benching -Use Micro Code 2D or 74 in CPU Settings page -Boot BCLK as high as you can, you are limited by the amount you can raise in the OS -Best option is to save a profile around 130 bclk and apply it and go back to bios. Then cool down cpu in bios and apply your higher voltage and bclk only dont touch anything that will cause a full cold boot. When it fails pull the 24 pin and warm up to you CBB setting then plug 24 pin back in and go into bios. Load your 130bclk profile again apply and go back into bios and pull cpu back down again.

I still like to think of OC as helping to push main stream computing higher. Do you know when we were at intel and we played with their CPUs and found the best clockers that they had they scanned them into the computer and went back and looked at what attributes allowed them to be better overclockers. I like to think that that has helped push clock frequencies in the main stream but maybe im wrong. Anyways label it what you like. Arguments can go either way, its as much of a sport as gaming is Id say but its just harder to get to the top here with ln2 and sample accessibility. Its a mental sport not a physical one.

Good job

your score is rising bro

We need simple simple simple, the harder things are getting to understand the more new guys just move along and decide not to participate. IF you get samples and or have ES you are elite. IF not you are not. 2 leagues cut and dry. Majors and Amateurs. Cooling can be cheated so is irrelevant. Even if a device is developed for telemetry and temperature I'll stick the probe under the south bridge and run my cpu on ln2 lol. Dont make a league for something that cannot be policed. Back to new guys. So they come read the rules, you are an amateur unless you get hw samples and or choose to use ES or you just prefer to compete there if not you are amateur league. Not if you use and air cooler and you are 2 months old and have ginger hair then you are in the ginger amateur air leauge.

pizza power!

it is simply a heat limit, delid your cpu and change the TIM under the ihs and 4.9 should pass and max temp may closer to 75c.

did you try run as admin

I already messaged him where is beer power

will put on MOCF tomorrow hopefully 4900+ thanks guys not good at much but im ok at this i guess

Did you delid yet?

My birthday party?

I'll take a 680

Thanks guys!

so is XOC enabled okay or not? rules dont state that is not so I assume it is and that is why we have screenshot rule with SPD?

4 1/2 hours away no problem I'll be there

thanks for the fast shipping to the USA doug top notch seller

MY account is tied to my business and I rent 230L IDK if it will help over state lines and they didnt honor my pricing in las vegas (Cost of living/electric etc difference) but If it can help I dont mind using my account.

Impressive efficiency even at high clocks! EDIT:

I always just copy Hideo driver

Goodnwork