bartx

Everything is on the pictures. Cooling: 1. RAM Pot (nickel plated base, anodized alu extensions), for Dominator mounting holes - 60 euro (4 pieces) 2. NB Pot (with bracket, backplate and mounting holes) - 40 euro (2 pieces) 3. CPU Mounting Kit for phase change - 50 euro (3 sets) 4. Anodized alu backplates - 10 euro (3 pieces) CPU: 1. E8400 Q820A http://hwbot.org/submission/2487642_bartx_superpi___32m_core_2_duo_e8400_8min_20sec_906ms Results has been done on autocascade in -70C temperature with poor old evap design. 50 euro + shipping 2. E5200 Q839B http://hwbot.org/submission/2452809_bartx_superpi___32m_pentium_e5200_8min_59sec_953ms Golden CPU, perfect for make some good LN2 runs. It has been delided (indium below IHS). I can make an IHS for it for the buyer (included in price) 50 euro + shipping RAM: 1. Corsair XMS3 1800MHz CL7 D9GTR - 50 euro + shipping 2. Geil Ultra 2x256MB PC4000 - 20 euro + shipping 3. OCZ PC3200 2x512MB Gold Edition, very low serial number, according to the info in the internet, Winbond BH-5 - 50 euro + shipping 4. Kingston HyperX PC3500 2x256MB Winbond BH-5 - 40 euro + shipping 5. Goodram Pro 2x512MB 533MHz CL4 Micron D9GKX - 30 euro + shipping All the markings on the IC are shown, you can find some info in the internet about those. Prices does not include shipping costs. I've got very good rates on overseas shipping (UPS), I can also ship via post. All items guarantee not DOA.

PM sent

I'm looking for dead Haswell/Devil's Canyon CPU or IHS only. Please send info on PM.

Pot customization for Direct Die

Due to some interest in direct die benching I made two direct die IHS last week to start this topic. Eventually I'd like to have this solution for Skylake-X, Kaby Lake-X and Coffee Lake (Kaby Lake and Skylake too). In this week I'm going to make another ones including the modification of the pot base. I'll keep this topic updated.

It should be always done like this.

Expansion tank - to keep 2nd stage static pressure in safe range.

Thanks Priceless

Hello everyone, Time to post something new in this section I'd like to show my latest cascade build. Took me a lot of time to make this, but finally build come to an end. It's big, noisy and powerful. I was able to reach -97C @ 360W load and -94C @ 400W. Should be enough for modern cpus... for some time Enjoy

Any missing components somewhere? I had H55N USB which worked only with i3 due to some missing parts of the bottom.

Sold, please move

Pending payment

Please send me a PM's, I won't get a notice if you only leave a reponse in a thread. Thanks

Gigabyte EP45-UD3R in mint condition, pulled from daily rig. Rev. 1.0 with latest F12 bios. Guarantee not DOA. Shipping worldwide. Paypal or bank transfer. 60 euro + shipping

sold, please move

Looks like GRIFF was first... (according to PM).

Rampage Extreme X48, all what I've got is on the pictures. Board has one little damage - one pin in the socket is broken (broken, not bent). I checked in datasheet, it's VID0 pin (see VID table), board works fine, set voltage is equal to the real voltage - no idea how it works, but it works. Board is not tested in terms on FSB, it hasn't ever been on sub zero, pulled from daily PC. I'm asking 90 euro + shipping, what is good price I think. Guarantee not DOA. Paypal preffered. Shipping via post or DPD (in EU).

bump, P5E3 Deluxe and 7900GS are gone

offers welcome

P5E3 Deluxe sold

2x2GB Dominator GT 2000MHz CL8 - PSC two sets, each 2x2GB for 30 euro + shipping from my experience, they're rather average, but I haven't tested them for clock capability. Guarantee not DOA. Modded 7900GS, mods list: - vmem mod - 8800GTX VRM with connected vsense directly to the back of the core - two additional capacitors - removed Primarion chip, which was responsible for OVP at ~1,8V One result, which I made on this card is below. Consider that, it has been done on HR-03 + 120mm fan Guarantee not DOA. 50 euro + shipping bartx`s 3DMark2001 SE score: 87060 marks with a GeForce 7900 GS 8800GTX vrms... 3 of them were made for my friends, who never picked it up... I'm looking only for return of my expenses. 30 euro/piece including wires (8GA) VGPU is working, VMEM needs removal of one resistor, which I'll do before shipping. They need vsense to be connected to the card - I'll provide the schematic. Boards don't have any short cicuits - cut using endmill on my CNC. 8GA wires - 2 euro/1m, I have couple meters I think P5E3 Deluxe @ 660 FSB, mods list: - vcore mod - cap mod on the back - P5E3 Premium bios - voltage display (very convinient, especially with P5E3 Premium bios, which can mess vcore) 75 euro http://hwbot.org/submission/2498457_bartx_reference_frequency_p5e3_deluxe_660.28_mhz Prices does not include shipping. Bank transfer preffered, paypal gift is fine too.

It can be done with 150$ hot air station and 25$ electric grill as a heater. Trust me Good flux, bunch of stencils and 60%tin/40% lead balls with proper diameter. It's not magic, just need some attempts and patience. Took me a month, day after day, to gain skills to resoldering gpus. Point is, that chips have factory defect. Reballing will help only for a while. That's why I forgot about it. You're doing the card and after a month it's a dead again. Sometimes it won't help at all.

I was doing it for some time, reballing and chip resoldering - couple years ago. Problem with those chips is, that chip is damaged itself, not balls below it. It may work for a week or two after this operation and die without any reasons. It would be better to replace chips from working reference cards...

Hi, I was wondering how much EP45T Extreme can be worth... I'll have one for sale in a few days. Any suggestions?

Me too I use Cu ETP, 99,9% pure copper. There is purer alloy CuOF (99,95%), but it's for sure more expensive and I'm almost sure that Intel won't use it in mass production due to price.