Samsarulz

Replied: Here some 3D runs as proof with IHS + LM + Custom Watercooling setup: - 3D Vantage w/ GTX 970 - 4900 MHz 18/18 https://hwbot.org/submission/4082161_samsarulz_3dmark_vantage___performance_geforce_gtx_970_68667_marks - 3DMark Fire Strike w/ GTX 970 - 4800 MHz 18/36 https://hwbot.org/submission/4082162_samsarulz_3dmark___fire_strike_geforce_gtx_970_14647_marks - 3DMark Fire Strike Extreme w/ GTX 970 - 4800 MHz 18/36 https://hwbot.org/submission/4082167_samsarulz_3dmark___fire_strike_extreme_geforce_gtx_970_7120_marks Regards

Nice run mate!

Hola Overclockers! Would like to sell my current Skylake-X Core i9 7980XE retail full bundled CPU. Was used mostly for 2D Benchmarks and sometimes for 3D (GTX 970, 2080 Ti SLI and other sessions). On water it can do 4700-4800 Mhz @ 1.275-1.30v for CPU using LM for R15, GPUPi, etc (except X265). Mesh can go up to 3300 using close to 1.3V. DRAM con work with SPlave profile and maxmem using 3600 12 11 and even 3666 12 11 @ 1.8v. For LN2 have used the SK-X DirectDie stuff from Der8uer and CPU can do between 5500-5600 MHz @ 1.53V (haven't tried more volts) and 3600 MHz @1.425-1.45V for MESH. Used Kingpin KPx for all my sessions along TRex without issues. DIE is in good condition, didn´t lap it with any kind of grit. For 3D it can do 4800 MHz @ 1.275V using Custom WC and running all 36 threads for 3DMark FS/FSE/FSU/TS/TSE. For Vantage or older stuff can do 4900 MHz with same volts disabling HT. Here are some of my best submissions using this CPU: - R15: https://hwbot.org/submission/4216276_samsarulz_cinebench___r15_core_i9_7980xe_5574_cb - GPUPI 1B: https://hwbot.org/submission/4132698_samsarulz_gpupi_for_cpu___1b_core_i9_7980xe_55sec_126ms - X265 4K: https://hwbot.org/submission/4128788_samsarulz_hwbot_x265_benchmark___4k_core_i9_7980xe_46.321_fps (only 5400 MHz sub) - GB3 MC: https://hwbot.org/submission/4216279_samsarulz_geekbench3___multi_core_core_i9_7980xe_98882_points - GB4 MC: https://hwbot.org/submission/4216282_samsarulz_geekbench4___multi_core_core_i9_7980xe_83625_points CPU is Delidded and is being used with Kingpin KPx + IHS. Can run 4400/3000 (CPU/Mesh) @1.135/1.20V and temps go up to 70-75°C for hottest core usinga Custom WC (2x triplerad + EK Supremacy Full Nickel). Looking forward to get 1000 USD + PPfees (or F&F) + Shipping. For this item cheapest shipping rate is using "small packets" and the cost will be close to 10 USD to USA, Latam, and maybe Europe (haven´t send before there but I can quote). Regards

Was a las stand!. Good run mate.

Sub is incomplete, read the rules

Nice, i knew it wasnt going to last long haha.

Good score but might be better with more loops sometimes lucky run pops up

thats a great 9900K!

Great sub Ale!

Great work. NA sub lasted a lot!

Epic score. Now you need to redo following the rules. CPU and memory tab + R15 showing full render image (not blocking with something over).

Great CPU/score.

you know if it can handle a 9900K or only 8th gen?

Probably you could do 7000-7050 for R15, GPUPi and even GB3/4. Very strong CPU

Also RAM/IF running 1:1 but only 1066 MHz

Strong!

Good work

Monster Kill!

Killing spree

Great score, how did I miss this...

Great work

5400 MHz CPU and 3600 MHz (max oc) for Mesh. Both clocks go down while in idle. Seems I will have to redo just to be sure

But different versions of W10 give a huge boost with GB3 (specially last ones) , you have to check yourself too. I will redo myself without benchMate just to be sure. Also take in consideration Im running 3600 MHz of Mesh, dont know if Bruno is running at those 3200 Mhz or higher, this bumps a lot Integer sub score and a bit the FPoint one. In FP im scoring less since CPU is running 5400 MHz instead of 5600 MHz. Regards

Will do Leeg

W10 gives a good boost over W7 (even Emb) for GB3 specially in Integer subscore. Same behavior is shown in with Ryzen 3000 CPUs. Floating point is very similar between W7 Emb and W10.