Alex@ro

well done!

Np man,keep pushing

Weird,for me it worked first try,x86...

yes,did u updated the sata controller,have disk,overwrite ok,reboot back in os,then switch platform?

Broke hwbotprime, sadly failed saving the data file properly ) Will prepare better for next sessions Sent from my SM-N910F using Tapatalk

Thank you guys! Sent from my SM-N910F using Tapatalk

Crazy job, well done! Sent from my SM-N910F using Tapatalk

thanks guys

No you can't, you already have too much memory Sent from my SM-N910F using Tapatalk

Damn it,sad when things do not go smooth

After binning some dozen X1700X i have to share that about 15% of cpu's did not do 3200 divider and 10% would get stuck at 55 over 110 bclk,each cpu was tested after clear cmos with saved profile,same componentes,everything same.Also,most of x1700x did 4000-4050 cinebench,good pieces 4070-4100,best is 4150@ 1.42 llc2 R15 on ambient water. also , Malay or China it did not make a difference in oc ability.

beta bios with new agesa?

Can it run xp too? Sent from my SM-N910F using Tapatalk

I say under 10 ambient is extreme,over that it is ambient,ac at 16 degrees no way is extreme,some people live at 15-16 degrees ambient in room during winter,not big deal.In fact living at under 20 room temp in winter is far better than having 20-22+.

That is wrong,till 104.85 you have pci-e 3.0,then the pci-e drops to 2.0 but the pci-e clocks is still synced to REFCLK. Finishing my tests with Crosshair VI,limit here is 152 refclock(which is suicidal for some benches) however 150.77 could run realbench no problems. Also for @chew,VDDSOC might help when on on the edge of stability,for example in my particular case i did memtest DDR4-3550 14-15-15 which was attainable only after raising VDDSOC to 1.25,1.15 was instant fail and 1.20 failed like 10% progress. I don't know how safe this is,however imc showed no sign or degradation whatsoever after this session.

Like the good sticks 4200 12 11 11 32m from absolute zero binned 90 kits and can't match that, have to give up and find other hobby Sent from my SM-N910F using Tapatalk

good scaler!

I found out a quick way to recover will be to use safe mode,then quickly after it ramps up you press safe mode again and then a reset after second start,i did confront with your issues too but if i double safe-mode and a reset it always gets to boot again.

ban the optician

Try each stick separate,looks like a dead stick , had lots of DOA on ddr4 lately...

has anyon else found cpu's that do not like high voltage? I have one X1700X that over 1.4375 as soon as load starts it will blackscreen and 80 code,under this value it is ok.the other one will scale to 1.45V,1.50 is tolerated but no gains in clocks(under water cooling).

3200c15 can be hynix or even micron, or even double'sided &e-die, a pic with serial number or naked ic will help. Higher straps on bios 0902 are 2t,this is changed from previous bioses in order to help clocks and stability(according to asus). However since 0902 is the bios that fixes the EC corruption i would recommned you stay on this one for now. Sent from my SM-N910F using Tapatalk

For live,the last 6 contenders

Can we get an overview for the final prizes, will there be aditional memory that we keep beside the cash money? Sent from my SM-N910F using Tapatalk