Jump to content
HWBOT Community Forums

SoF

Members
  • Posts

    1515
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by SoF

  1. I'm working on it have already a bit faster time but after a while the system always get's unstable and needs some rest. my biggest issue: high ram together with high MHZ gets me in trouble so I couldn't run my max of 5590 together with 2100+ yet...
  2. I got some new RAMs from a team-buddy and managed a new 32m stummerwinter screaming out of his window here (in that video if you don't understand: "Micha you *****hole wtf have you done bastard?!?!?!" the guy I got these rams is from AF also and called "micha" usually ) Sub 6min 9s...trying to get more ram-speed...seems sb likes ramspeed a lot for 32m...
  3. Core i7 2600K 5 pieces all batch: L040B165 Testing without internal PLL overvoltage: 1x 4700 1x ~4888 3x 5000 One of them wanted to boot 51x100 but couldn't fully manage it out of thoose 3x5000 with pll overvoltage 1x 5537 MHZ 32m 1x 5555 MHZ 32m 1x 5588 MHZ 32m ___________________________ Then we have a newer batch now coming which already did multiple 56x100 with pll overvoltage on water and air CPUz Batch: L040B307 56x100 1.572V
  4. Next round 1m 6.640s 32m 6min 12.750s My chips seems to degrade That 32m was the last I could pass on all cores - now it will mostly freeze near the end on core 2 & 3 5595 booting not possible anymore whaaaaa
  5. I just saw the title "Massman member discussion thread. " and thought "wooohoooo here is the place we are all bashing the lil' massi (another time)" but reading a bit what is it actually all about?! don't get the point...if somebody searches me - I am benching my shadyb1tch which seems to have degraded a bit
  6. oh while we are at it there was something I needed to ask about the blitz challenge: I have "normally" entered my results w/o photo of the system. now I would have to re-submit it into the challenge - can this cause any troubles with the points or so? well guess I simply should delete my scores first, or what ya say?
  7. can't run higher mem and I have the feeling the maximus is a tad faster in pi(fast) - will be hard to beat pifast, gave up on 32m for the moment
  8. seems to depend on the mobo not gpu - the more "unknown devices" shown in xp device manager the higher the probability of recieving the error...
  9. Hi all, today stummerwinter finally took an attack on my SandyBridge-Scores and gave me a lesson about how to run the new chip on 1m & 32m Stummerwinter's 32m 5537 MHZ 6 min 11s SoF's 32m 5347 MHZ 6 min 47s But then there came my time - wprime32m and this evening he told me "haha I got u" And there was my reply beating stummerwinter is just priceless Now I need to bench some 1m, 32m and pifast - a week holidays left so be sure I try everything on that baby...need more internal VPLL!!!!! did I mentioned he got that chip from my "pre-orders" ? damn he seems to got lucky regards SoF
  10. beating stummerwinter in wprime32m sandyb1tch - priceless!!!
  11. Hi, thought I'd post my findings with 5x 2600K here. First the CPUs: The results of 5 CPUs (4C/8T): 1 bad CPU 47x100 ~without internal PLL voltage override 50x100 ~1.48V no boot with PLLv tweak 1 ok CPU 49x100 ~1.38V without internal PLL voltage override 3 good CPUs 50x100 ~1.38V without internal PLL voltage override For finding good CPUs you need 50x100 with 1.4V or less booting then your chip has potential I would say. For all day find chips that run cool - I had differences of 5-10°C per Chip with same paste and cooler. But the cooler chips didn't ran that well Batch of all 2600K I had: L040B165 regards SoF
  12. hope I'll get a new card soon -.-
  13. yes the temps are right - when you have cold it would show 0° in realtemp.
  14. Here we go then Testing single stage maybe later...
  15. I just had the same - are you running "a new" platform? had this with 2600K and 465 GTX...
  16. I'm a small guy - when I cut off something of somebody it mainly will be his feet
  17. wow that is a lot of snow outside - half a meter?
  18. what kinda CPU is it 6C/12T? not heard of it yet but as long as there is something comparable why not using it
  19. temps gettin' nearly -20°C here currently and I am not at home - whish I could be on my balcony together with one of my sandybiatches and some old GPUs now
×
×
  • Create New...