TheGamingBarrel

What if I use LHe instead?

I have been trying to get memory as stable as my Impact, using 2 different kits, this is the level I am trying to reach But with normal RTL's and IOL's, I have tested my SA Volts from 0.9 to 1.2, finding that 1.125 To be the sweet spot with my CPU, I am also running +.25V on both IOA And IOD, I have also found that I cannot run full tight, or even get into windows at 8-12-8 2600, needing 8-13-9 To get into windows at higher volts than the impact and still not passing what would at tighter timings, for reference on the Impact I was able to run 4-5-4-15-4-4-4-4-11-11-1, on this MPOWER I am only able to run 4-5-4-15 With the rest on auto, I will upload some BIOS Screenshots in a bit

Sorry what? I can't hear you over my "0MHz" CPU

In the top right of the submission, click edit, then on the very top, where it says score, change it to 996.

Can someone please tell me if those RAM slots are hanging off? The socket was damaged yes, but causing me to wait those many months while you seemingly twiddled your thumbs and got on with other work, despite that I have paid you to get the board back, I have gotten the shipping return but feel that I am entitled to get the board or at least a partial refund of the board. Andrew, I fully understand he is busy, but no one should be made to wait as many months as I did, whenever I get something damaged in shipping, for example when I sold @Samzarulz a part that got damaged, I had to pay him out of my pocket, excluding the shipping, hoping that my claim would be accepted because its important to get that money back in their hands, or a working product. I was also promised a board by you, but did not receive it, why go back on your word? Doesn't help your case at all.

The more the merrier!

Destroyed a slot on it, are you bonkers? I have pictures somewhere that I will attach of the board before I sent it, I told you about the socket pins and you said that you will definitely get me an new board since you are on good terms with the giga reps, a week passed and you message me saying that "I have a board for you from gigabyte" "your board could not be repaired" which implies pretty strongly that you have my original board, in a non functioning state, I proceed to muster up the money for a repair to that board, so about a month later I ask about someone at OCUK repairing it, I get told that it is not in a broken state, so I pay postage to get it here, 4 Months pass and still no board, every month I ask about the board, to no reply, to the point where I am driven to making this post,, to where I instantly get a response. Will upload pics of the board later.

I am trying to contact with the user 8 Pack as I wish to finish a deal that was started a while ago I wont go into details, but it is an RMA That hasn't quite got here All I ask is for him to finish the deal as I know he is a good person and I need a board to bench cold with. I have attempted to contact him via PM on skype, only to receive no reply.

What I went through last year We had Rauf and Luumi come in from Sweden and Finland respectively

Where is it? If it's any further north than last year, it may be hard for me to come

Probably will spill more beer than LN2 Knowing Gav

But are you a RESPONSIBLE adult?

Awwwwwww, now it's illegal for me to go! Now it depends on when in the year

I shouldnt need to provide pics, my scores are already slow enough

@K404 Happy birthday mate!

Idle -30, the compressor has no branding on it that I can find.

How about we go and do an LN2 Day and see who gets most points? I think I have enough GPU's

Looking at the state of the UK Scene, I might actually be there soon

Not a little devil, but this is with the temp sensor built into the evap head, I don't know who made this sadly.

-33 Idle with both my 4770K Set up and just having it sit there while powered up it is still -33C.

http://i.imgur.com/nCIrmNK.jpg Here is a picture of this specific phase unit under load with a 3570K At 5.8, noting that its at -39 with load, I recently bought it and when it arrived I decided to do a test power up, it doesnt get anywhere below -30, which is... almost 20 Degrees off of what it should be at idle,I decided to leave it a day and retry, now it hits -33 which is better... But not what it was doing before, I left it another day since I was at school and it is staying at -33, does anyone happen to know what could be the cause of this? It was shipped a few hundred miles inside the UK, but surely the gas would be fine from that, would it not?

Ln2 Also works if you try hard enough.

Its kind of weird that it isn't just in the advanced suite. Would make more sense.

Isn;t time spy still a paid upgrade?

That is like what? 5.1-5.2 Haswell? Been keeping up with your FB Posts breaking 10M Current CPU's