TheQuentincc

pmed

bump

pmed :)

I can ship it for about 15€, I just need to check the total weight, send me a pm directly if you are interested

bump

It's obvious all core can't clock the same, you can't call someone a "tryharder" only because he take some of his time to clock every core, one by one to get his best score, the time he used to validate his max freq should not be considered as wasted time, it take time to get the best result like with every other bench. Then validate the max freq using load is non sense since we have a lot of 2D bench to do so. CPU-Z max freq is also one of the only bench to be reported on media, higher the score is, higher the hype is and so the chance of seeing new face on the bot.

price drop for the pot

bump

price decreased a bit, kingston kit is sold.

Hi, there is some LGA1151 cpu on Aliexpress/Taobao that are ES laptop/BGA CPU soldered into an interposer that can be used in LGA1151 chipset 100-300, these are a lot cheaper than real LGA1151 cpu, I own one of them which is the "QQLS" model, an 8/16 unlocked that I got for less than 150€ (less than half the price of the 9900k...), there is a list of these cpu (other one are not ES and just laptop to desktop chip) : QNCT - 6 core die, 6/12 active, locked multiplier, "8th gen", U0 rev, similar to 8750H/8850H (I don't know their operating frequencies), + 4 bin oc up to 6 cores at 3.3GHz QQLT - 8 core die, 6/12 active, unlocked multiplier, "9th gen", P0 rev, similar to nothing (nothing is P0 and 6/12), cannot be a 8950HK because it's a 6/12 die QQLS - 8 core die, 8/16 active, unlocked multiplier, "9th gen", P0 rev, similar to 9900K (desktop), could not find P0 unlocked laptop chip, could be a 9980HK ES QTJ2 - 8 core die, 6/12 active, locked multiplier, "10th gen", R0 rev, similar to 9750H/9850H (I don't know their operating frequencies), oc up to 6 cores at 4.0GHz QTJ1 - 8 core die, 8/16 active, unlocked multiplier, "10th gen", R0 rev, similar to 9980HK or 9900K (desktop) Note that most of these cpu can't pass DDR4 3000MHz and timings cannot be push as low as on desktop cpu (I'm walling at 2933MHz cas 16 with b-die) The issue is, as far as I know, these cpu are detected by CPU-Z as this (my QQLS) : Giving this, there is no way to know which cpu they are matching with, also it looks like CPU-Z is having a hard time reporting memory/uncore frequency as well as timings (might be only my case that might be because of a broken bios on my Asus Z370-F Gaming). From my point of view, only the QQLT should not be benched on hwbot since we can't find any similar cpu (or we could say it's similar to 8700k, just to allow people benching them), for QNCT and QTJ2 it depend if their similar laptop counterpart can match their frequencies (just to be fair against them, if yes they should be allowed), for the QQLS and QTJ1 we need to discuss about which cpu they most likely match. As far as I know, benching ES cpu with point enabled is only possible by everyone (except Elite) if it's not a current gen ES cpu and if it's not for a competition. So are these cpu allowed on hwbot and if so which cpu do we associate them ? (please say yes so I can bench my GPU and get rid of them hehe)

added cpu pot

Yes still available No, 60 is already very low for this type of memory. 4x4 2400C10 G.Skill is sold.

Hi, selling from France, shipping to EU. LGA775 stuff : - DFI LANPARTY DK P35-T2RS, bundle in picture, nightmare OC, the box was in water at some point (not the board) - 50€ shipping excluded - Gigabyte EP35-DS4 bundle in picture - 15€ shipping excluded - 2x Asus P5E3 Deluxe with no bundle and I/O, one have a damaged (scrapped) NB but both are working - 60€ each shipping excluded - Gigabyte EP45-UD3 bundle in picture - 25€ shipping excluded Picture of board are available right there : https://drive.google.com/drive/folders/1gktYNvf_Kfk4AAw3OJ_KHK-COa69u28T?usp=sharing - Gigabyte GA-EP45T-UD3P, with I/O shield, works perfectly, the socket have no missing pin, one of the few board to run 775 quads above 550 FSB - 80€ shipping excluded AGP Video card : - MSI Geforce4 MX440 64MB - 20€ shipping excluded Laptop : - Dell Latitude E4200 with upgraded CPU (BGA) SP9600, 5GB DDR3 1066, mSata, 12.1" 800p, webcam, upgraded speaker, decent battery, 3G modem, 130W charger + spare parts from another E4200 (include working SU9600 motherboard) - 60€ shipping excluded - Acer 1622LM - Pentium 4 HT 3.06GHz - 2Go DDR1 - ATI Mobility 9700 64MB - empty PATA 44 2.5" bay (mounting present) - 15.0" 1024*768 - DVD player - Original battery + 2014 made battery - 180W charger - good overall shape - 40€ shipping excluded - IBM Thinkpad 390 et 600E for parts, both works but there is some missing parts or broken chassis, no battery, no charger - 20€ shipping excluded

bump

Turing issues are related to memory chip being bad.

That seems to be some sort of ASIC quality for cpu but only visible in Asus Bios

Hi, do we need to fill overall score or only GPU score in 3dmark11 ?

https://hwbot.org/news/884_application_12_rules/ result details is missing :)

might be good to make something like an "honorable mention" for best air/water/above zero user in each competion that include extreme cooling, so that everyone could have a goal ?

no restriction about temp ?

Hi, you don't have any I/O shield or more bundle for the #90: DFI LanParty UT P45-T2RS. ? And how much for shipping to france ? Thanks you

Hi, I want to buy at least two stick of Elpida Hyper or Micron D9GTR with "good" frequency capability in cas 4, 5 or 6, screenshot with voltage required needed, it's better if there is a spi32m completed in the screenshot Ship to France

Hi, where are you located for shipping ? How many with shipping cost to france ?

Do you still need high FSB EP45 board ?