flanker
Members
-
Joined
-
Last visited
Everything posted by flanker
-
Ha, so this is the reason of my issues tight timings and no post on 3866/3733 (without 2T). 1T only up to 3666 MHz -
-
Nice, the same "issueL TRAS in on M12A. I can not set lower than 28 (if I set 24 or 22, it was still 28 in Windows) Can you ask Shammy, if this will be also in any Apex XII Bios?
-
no, PBO for benchamrking no needed. PBO is for daily type of cooling and 24/7 (optimized with curve optimizer) But for 32M U will need disable the cores and hyperthreading and push CPU to 5 GHz (propably best way boot on lower clocks and set higher value in OS) And of course, a lot playing with DRAM timings and IMC (SOC voltage etc)
-
solid result
-
-
-
Thanks, but Il give it up, waiting for Alder Lake and Apex and Zen4 Need spent some money again.
-
how u can compare Apex12 with Apex13?
-
-
-
-
this is propably not in 5GHz challenge (max CPU clock 5600MHz), this is only 5GHz challenge thread
-
-
slightly better, but are steps by 0.05s to 0.1s :D... https://hwbot.org/submission/4734729_flanker_superpi___32m_with_benchmate_core_i9_11900k_5min_9sec_776ms?recalculate=true
-
-
-
nice! How good was on air? Or any comparison with binning what u did compared 4 others chips?
-
-
-
I think, IMC is OK as most of chips (better than average). Depends on your voltages. I use IO MEM 1.45V and SA voltage 1.5V. Propably I will need more for 3866 MHz tight timings (I got only cycles without right post) With more weak timings and 2T chip working up to 1900 MHz. So this is propably almost best what I can do with 3600 MHz (tomorow I will try lower TRFC and RAS) And after I will try 3866 C12 or Windows 7 OS
-
better than previous two BIOSes?
-
-
-
Propably also this card: https://www.techpowerup.com/281394/amd-radeon-rx-6900-xtx-engineering-sample-pictured
