Doug2507 Posted November 5, 2015 Share Posted November 5, 2015 (edited) So, anyone had a good play about with sammy e die on this and compared to mfr? Been away with work for a bit and will need to decide if it's worth keeping a quad set of e die at hand for x99. And what would be the concensus on running 1.9 vdimm on x99.....? Edited November 5, 2015 by Doug2507 Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted March 6, 2016 Crew Share Posted March 6, 2016 (edited) Have some bend pins, triple channel only atm... can still be tightened G.skill 3600C17 @ 3333C11-11-11-28 at 1.69Vdimm Edited March 6, 2016 by Leeghoofd Quote Link to comment Share on other sites More sharing options...
xxbassplayerxx Posted March 7, 2016 Share Posted March 7, 2016 Get dat C10 at 1.85V! Quote Link to comment Share on other sites More sharing options...
Guest Bullant Posted March 7, 2016 Share Posted March 7, 2016 Looks good leeghoofd,think is quite good for w8 man,think b-die be good choice on X99 Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted March 8, 2016 Crew Share Posted March 8, 2016 Get dat C10 at 1.85V! Need to get that board fixed first... Quote Link to comment Share on other sites More sharing options...
unityofsaints Posted May 22, 2019 Share Posted May 22, 2019 (edited) Reviving an old topic and switching from to B-die. Here's a 32M run on SS, far from maxed but gives you an idea that the Haswell-E IMC really isn't that bad: 1M passed 1800, pretty sure 32M would get there too. I don't even remember if maxmem was set as it's an old run. Edited May 22, 2019 by unityofsaints 2 Quote Link to comment Share on other sites More sharing options...
Bullant Posted May 22, 2019 Share Posted May 22, 2019 (edited) Nice, all these old results were mfr Hynix mate....not great memory and needed them cold to get them moving, would of loved to try this platform with b-die back in the day. The mfr Hynix did do better on cold on z170 tho, still no match for b-die Edited May 22, 2019 by Bullant 2 Quote Link to comment Share on other sites More sharing options...
unityofsaints Posted May 22, 2019 Share Posted May 22, 2019 On 11/5/2015 at 5:52 PM, Doug2507 said: So, anyone had a good play about with sammy e die on this and compared to mfr? Been away with work for a bit and will need to decide if it's worth keeping a quad set of e die at hand for x99. And what would be the concensus on running 1.9 vdimm on x99.....? Not sure if you're still interested after all these years but here's a LCC run on E-die: https://hwbot.org/submission/2691736_dinos22_superpi___32m_core_i7_5960x_5min_55sec_922ms Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.