Gigabyte X99 SOC Force Champion -DDR4

[Doug2507]

So, anyone had a good play about with sammy e die on this and compared to mfr? Been away with work for a bit and will need to decide if it's worth keeping a quad set of e die at hand for x99.

 

And what would be the concensus on running 1.9 vdimm on x99.....?

Edited November 5, 2015 by Doug2507

[Leeghoofd]

Have some bend pins, triple channel only atm... can still be tightened

 

G.skill 3600C17 @ 3333C11-11-11-28 at 1.69Vdimm

 

Edited March 6, 2016 by Leeghoofd

[xxbassplayerxx]

Get dat C10 at 1.85V!

[Guest Bullant]

Looks good leeghoofd,think is quite good for w8 man,think b-die be good choice on X99

[Leeghoofd]

Get dat C10 at 1.85V!

 

Need to get that board fixed first...

[unityofsaints]

Reviving an old topic and switching from to B-die. Here's a 32M run on SS, far from maxed but gives you an idea that the Haswell-E IMC really isn't that bad:

1M passed 1800, pretty sure 32M would get there too. I don't even remember if maxmem was set as it's an old run.

Edited May 22, 2019 by unityofsaints

[Bullant]

Nice, all these old results were mfr Hynix mate....not great memory and needed them cold to get them moving, would of loved to try this platform with b-die back in the day. 

 

The mfr Hynix did do better on cold on z170 tho, still no match for b-die 

Edited May 22, 2019 by Bullant

[unityofsaints]

On 11/5/2015 at 5:52 PM, Doug2507 said:

So, anyone had a good play about with sammy e die on this and compared to mfr? Been away with work for a bit and will need to decide if it's worth keeping a quad set of e die at hand for x99.

 

And what would be the concensus on running 1.9 vdimm on x99.....?

Not sure if you're still interested after all these years but here's a LCC run on E-die:

https://hwbot.org/submission/2691736_dinos22_superpi___32m_core_i7_5960x_5min_55sec_922ms