November 23, 201113 yr 2700K seem to do very well - haven't seen a single one that wouldn't do 5.55 at least... ....so you can be pretty sure all new 2500 and 2600K are crap...(and after all these bad 2500k and 2600k in the last weeks that would make sense)
November 24, 201113 yr 2700k L046c072-a1205 : 54x L046c072-a0937 : 52x L046c072-a0779 : 53x Edited November 25, 201113 yr by Billy-The-Kid
November 30, 201113 yr Tested 35 2700Ks all from the same batch; L113b926 22x 54X 7x 55X 4x 56X 2x 57X
December 5, 201113 yr where did all the 58s and up go with sb? i haven't seen any from 2700ks nor any from the newer batches of 2600ks I am tired.. has anyone sold 6ghz chip yet? what is the price of such a chip?
December 5, 201113 yr I have 57X 2700 on air. Will be getting it cold this week and we'll see what happens.
December 5, 201113 yr I have 57X 2700 on air. Will be getting it cold this week and we'll see what happens. good luck mate... you usually have to get a gem for it to scale past or around -50C usually you end up with the same max multi + a few mhz on cold. Tested 4 58X multi chips.. got absolutely nowhere on it using DICE vs phase.. just got a few cold boots and instances where it would boot, but then when i'd get into OS nothing would work except my mouse.
December 8, 201113 yr 2700k batch 3128C083 sn 4768 max multi: 53 Cooled by SS -47C *probably the worst (in terms of max multi) 2700k on bot yes that is max multi it's low voltage 5ghz though.. maybe i'll test more on water/air
December 9, 201113 yr got 5 more 2600k from newegg at $299 not bad! 3x 3135B546 2x 3136A839 we'll see
December 9, 201113 yr I think my phase is broken or 2700ks just suck.. (evap reads -37C at load via fluke thermo.. 5ghz 1.385v... but OS says 30+C through real temp ) Batch 3126C259 sn: 0799 max multi = 52.. TERRIBLE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! so far 2700ks have average worst with max multi than 2600ks! FFFUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU Edited December 9, 201113 yr by badatgames18
December 20, 201113 yr Hi boys, someone has tested a 2500K with batch L130C519 ? I can buy it...I have had a 2600K with batch L133 but it reached only 4.9 GHZ with 1.45V under Phase Change Thanks Andrea
December 23, 201113 yr Hi all 2600K L125B419 #2475 100x51 OS ok L132B713#1 #1300 100x54 OS ok L132B713#2 #1654 100x49 OS ok wtf...... 2700k L131B552 #? 100x51 OS ok
December 30, 201113 yr Tested new cpu today L147B458 56X multi 5700 can do all benchmarks with HT on and 1.64V http://valid.canardpc.com/show_oc.php?id=2172774 Last cpu was 3006B202 57X Could do 2D at 5770-5780 and 3d 5750-5767 (check my hwbot profile)
December 31, 201113 yr 5x 3142B428 went x55 x54 x53 x53 x52 5x 3145B232 up next Very interested in the 3145B232 batch. I just got one of these today and have to wait a week before I can hook it all up. Would like to see what this batch is capable of.
January 4, 201213 yr 3145B221 http://hwbot.org/submission/2236956_wumpus_superpi_core_i5_2500k_6sec_599ms got another of the same batch waiting for testing as well
January 4, 201213 yr 2700K 3131B827 #0692 5590 max for benches, boot 5600 with a lot vccsa and vccio but not stable... Ok on air (5578 32m) but doesn't benefit from cold except you can run low volts...
January 10, 201213 yr I've been considering binning some 2600K's... Is there any point now that the 2700K has released? Are all the good 2600K's being binned as 2700K's?
January 11, 201213 yr 3145B221 http://hwbot.org/submission/2236956_wumpus_superpi_core_i5_2500k_6sec_599ms got another of the same batch waiting for testing as well 3145B221 serial no 2608 max multi =56x max mhz = 5724 3145B221 serial no 2448 Max multi = 56x max mhz = 5600 3147B095 to be tested tonight.
January 12, 201213 yr Mine 2500k L041C233 Max multi : x50 On my P67 Sabertooth it requires 1.425v in BIOS which drops to 1.38v under load with LLC set to high. The above is fully intel burn test.
January 14, 201213 yr heres mine # 3126C259 max multi 56x only have 212+ air cooler =( Edited January 14, 201213 yr by dVeLoPe
January 15, 201213 yr Splave has exceeded their stored private messages quota and cannot accept further messages until they clear some space. Pm me Splave,
January 20, 201213 yr Hy boys... I have tried a 2500K batch L130C519 with max 52X and i'm waiting a 2600K batch L041C232...Someone has tested it ? Thanks...I have used a GIGABYTE GAP67A UD3 but it had problems with ram so i ordered a ASROCK Z68PRO3 GEN3 with CRUCIAL BALLISTIX TACTICAL C8 @ 1.5V
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.