luisxd Posted March 20, 2018 Share Posted March 20, 2018 Anyone else having issues when HPET is enable?, it causes my system to turn off after a few blackscreens even when i am doing nothing, just sitting in desk moving files. GPUPI and HWBOT x265 benchmark uses it so they ask me to enable it to be able to run the benchmarks. This seems to be new (at least on GPUPI) since i never had this problem before with GPUPI. I'm using Windows 10 x64. Any advice? Quote Link to comment Share on other sites More sharing options...
_mat_ Posted April 4, 2018 Share Posted April 4, 2018 What's your system hardware? Quote Link to comment Share on other sites More sharing options...
bolc Posted October 4, 2018 Share Posted October 4, 2018 (edited) Hi, I jump in regarding gpupi 3.3 and hpet activation in Win7 Pro 64 bits. Gpupi 3.3 detects a potential drift for my system and asks to activate HPET. I say Yes and reboot, but the HPET is inactive... hence remains a 3.58 Mhz timer written in x265, and RTC 1 ms in gpupi MB is MSI K8N Neo4 Platinum (also called Neo-F or MS 7125), nforce 4 chipset Cpu is Amd Dual Core Opteron 175 On the same setup, I had no issues with single cores Opteron 144 and 155, and no messages of a potential drift. What is happening...? I am using gpupi 3.3.2 legacy. cheers Edited October 4, 2018 by bolc Quote Link to comment Share on other sites More sharing options...
bolc Posted October 4, 2018 Share Posted October 4, 2018 I have removed the opteron 175 and put a 3700+ single core, and no pb, rtc 1ms, no display of possible drift hpet is not active but it allows benchmarking. Quote Link to comment Share on other sites More sharing options...
yosarianilives Posted October 4, 2018 Share Posted October 4, 2018 58 minutes ago, bolc said: I have removed the opteron 175 and put a 3700+ single core, and no pb, rtc 1ms, no display of possible drift hpet is not active but it allows benchmarking. Did you make sure that HPET is also enabled in BIOS? Quote Link to comment Share on other sites More sharing options...
havli Posted October 4, 2018 Share Posted October 4, 2018 I'm not really sure... but isn't s939 too old to support HPET? AM2+ boards definitely support it, never tried it on older platforms. Quote Link to comment Share on other sites More sharing options...
cbjaust Posted October 5, 2018 Share Posted October 5, 2018 would the AMD Dual Core Optimizer be required? AMD utilities page Quote Link to comment Share on other sites More sharing options...
bolc Posted October 6, 2018 Share Posted October 6, 2018 On 10/4/2018 at 10:42 PM, yosarianilives said: Did you make sure that HPET is also enabled in BIOS? there is no such option in the bios 1 Quote Link to comment Share on other sites More sharing options...
bolc Posted October 6, 2018 Share Posted October 6, 2018 On 10/5/2018 at 5:05 AM, cbjaust said: would the AMD Dual Core Optimizer be required? AMD utilities page to be tried i used clockgen and memset but no amd software since AOD was not supporting nfroce4. I am unsure that AMD DCO will support nfroce4 chipset though... Quote Link to comment Share on other sites More sharing options...
cbjaust Posted October 6, 2018 Share Posted October 6, 2018 the dual core optimiser is a driver for windows, and nothing to do with the chipset. Quote Link to comment Share on other sites More sharing options...
Mr.Scott Posted October 6, 2018 Share Posted October 6, 2018 Pending the OS used, it may or may not be needed. I believe the optimizer was included in XP SP2 on up. Quote Link to comment Share on other sites More sharing options...
bolc Posted October 6, 2018 Share Posted October 6, 2018 (edited) thanks but no imprivement with dco. and on a am2 / 790x chipset, gpupi 3.1 or 3.3.2 legacy will simply not start (appcrash)... existing scores were made on 2.x only. no gpupi then and yep. 2.3.4 runs fine. ok so no more gpupi on am2 (but on 939 is fine... perhaps I should put hpet off and see if gpupi 3.x starts on am2...) Edited October 6, 2018 by bolc Quote Link to comment Share on other sites More sharing options...
havli Posted October 6, 2018 Share Posted October 6, 2018 GPUPI 3.x is a hit or miss it seems. Today I was running it on C2D and always appcrash when saving data file. On the other hand, A64 AM2 was running just fine http://hwbot.org/submission/3927537_havli_gpupi_for_cpu___100m_athlon_64_le_1640_(orleans)_8min_27sec_791ms 2 Quote Link to comment Share on other sites More sharing options...
bolc Posted October 10, 2018 Share Posted October 10, 2018 (edited) the appcrash on saving, I had this too ibeleive on 3.1.x or 3.2 but not on 3.1 hence i stuck with 3.1 for the 3.x and with 3.3.2 legacy for the 3.3.x... u tried 3.1 i guess? I still have to try this : put hpet off in the bios and the os and see if gpupi 3. xcan start on am2... Edited October 10, 2018 by bolc Quote Link to comment Share on other sites More sharing options...
havli Posted October 17, 2018 Share Posted October 17, 2018 Actualy I didn't try versions other than 3.2 and 3.3.2. Those behaved the same - appcrash. Thanks fro the tip, I'll try the 3.1 next time. Quote Link to comment Share on other sites More sharing options...
_mat_ Posted October 21, 2018 Share Posted October 21, 2018 Use Windows 7 for old hardware, it will allow RTC because there is no drift possible there. GPUPI follows the rules of HWBOT there. As for the hardware detection bug on old hardware, I will look into it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.