gwbgff Posted May 14, 2018 Posted May 14, 2018 Dear Goddy, I was getting all my systems parts information and by mistake my profile got set before I entered the details. I cannot find where I can edit my profile. If you could please tell me how to edit my profile to put in my parts information in, I would be grateful to you. My apologies for messing this up. Kind regards, Gerald Fleming Quote
Administrators websmile Posted May 21, 2018 Administrators Posted May 21, 2018 There is a small arrow next to your nickname on top. Click on this and you see options including profile. Quote
kubrhead1 Posted December 19, 2018 Posted December 19, 2018 Hello, I want to ask why I can not accept the challenges? Quote
Baddemichl Posted April 14, 2019 Posted April 14, 2019 Hi, when will be RTX mobile Cards online? Quote
Crew Antinomy Posted April 15, 2019 Crew Posted April 15, 2019 11 hours ago, Baddemichl said: when will be RTX mobile Cards online I'll add them this evening. Quote
Crew Antinomy Posted April 15, 2019 Crew Posted April 15, 2019 19 hours ago, Baddemichl said: RTX mobile Added Quote
Mishanya1344 Posted September 21, 2019 Posted September 21, 2019 Hi. I`m the founder of the ChemasOverclockingTeam team (https://hwbot.org/team/chemasoverclockingteam), now team has no captains assigned, so I`d like to regain captain privileges. Recently I moved to another team, but in the end I decided to return. Already several times wrote to the e-mail Christian and Michael but didn`t receive a response. Thanks. [img]https://i.imgur.com/nwA631G.png[/img] Quote
Crew Leeghoofd Posted September 22, 2019 Crew Posted September 22, 2019 reported to the programmers Mishanya1344 Quote
AteXIleR Posted November 26, 2019 Posted November 26, 2019 Could you add the new Kirin, Snapdragon and Exynos SoC iterations to the list of available processors in the submission section? I assume there are some who would be interested to upload his newer devices' scores onto the leaderboard. Please. Quote
Dirtydezzy88 Posted January 4, 2020 Posted January 4, 2020 I9 9900KS is not a valid selection in the processor section Quote
M1RROR Posted February 16, 2020 Posted February 16, 2020 problem with GTx8 results: https://ibb.co/qFrvPDd Quote
Crew Leeghoofd Posted February 16, 2020 Crew Posted February 16, 2020 seems to be a bug with DDR3 and this particular memory Quote
Fragmeister Posted February 22, 2020 Posted February 22, 2020 I joined a few days ago and was receiving points for submissions however in the past 5 days my total GTPP and HTPP points do not show or update on my profile page as well as cups and medals, can this be fixed? Quote
Crew Leeghoofd Posted February 22, 2020 Crew Posted February 22, 2020 I fear this page is partly broken since the classic update. HWBot is making a transition to a new owner and the code will be revised by a new programmer. meaning this will take a long time before it will get fixed as we need to addres issues with a higher priority Quote
Broken APEX49 Posted March 15, 2020 Posted March 15, 2020 About Cheapaz Chips Round 1 APU AMD 3000G FM / UL verification link is required ← How can I set it up? The link between 3DMark and HWBOT has already been established, but there is no submission item to HWBOT from the result screen Quote
cbjaust Posted March 15, 2020 Posted March 15, 2020 Copy and paste the url from the futuremark result to the compare url on the entry form 1 Quote
The Otherside Posted April 8, 2020 Posted April 8, 2020 Hello, i'm kinda new here, been hobbying pc's and hardware since 82 last century :)... so i made a profile, and submitted some scores, also fro xtu intel. Other submitted benches went ok, the xtu, was a bit figuring it out, and imo it worked, i submitted actual benches done on my pc, yesterday or the day before. Now when logging in and checking my profile, on top it says 3 submissions reported, so appearantly i must have done something wrong, also is it not possible to set my xtu profile 'public' ... at this moment when i go and check my profiles from xtu, they are gone, at the link on top where it says 'reported (3)' there is a sheet, where appearantly i must select a 'row' but it is complete blank, and cannot select anything, also an error message is posted in the sheet. In the comments is said that there are suggestions to alter my settings, so i loaded the profile in xtu, but it where the same settings... And my profile is unaible to make public for 'use of testing material and and some more things i should be using to do those benches' ... ehm shame i could not respond immediately to whoever decided that some settings could not even be made with my setup ... this is actually kinda weird, because the benches are just done on my pc, without help of any aftermarket super hardware testing rig ... but as said i am new here on site, so i probably must have done something wrong ... day 3 on the site, and i must say i am amazed that there is actually response to my scores, harder even, they get reported, or flagged automatically ... to be honest i have not gone through the hassle of reading every rule, because there are a lot of them, as i went to look at them a bit more euh focused. My personal goal is only to compare what i make with the settings of the hardware, and compare it with scores of other enthousiasts as to say... Can someone pls point me in a direction as maybe who to contact about the reported submissions. Because this community is for a third time visitor quite huge with a wide range of interest. So i understand there must be rules, not even arguing about that ... but being told i use special hardware and/or getting reported as such... So can someone pls enlighten me a little bit, i have no intentions what so ever to alter tests in my advantage being it with modded hardware or dodgy software, for the reason that i absolutely see no point in fooling myself. And for openers it would be nice if someone could just tell me what went wrong to begin with ;) ... Thanks in advance for taking your time reading this to begin with ... ;) peace out Quote
Splave Posted April 8, 2020 Posted April 8, 2020 (edited) Welcome, any questions you want to ask about rules feel free to make a thread with what you'd like to know. Not so bad once you get the hang of it. Don't take offense to reported submissions we all get them. Edit: you will need screen shot with info in picture I posted red boxes mandatory. Edited April 8, 2020 by Splave Quote
Crew Leeghoofd Posted April 8, 2020 Crew Posted April 8, 2020 If you have any speciific question you can contact me, Bilko or Georgestorm. Anyway quick update on the site for you: subbing for other benchmarks via the XTU profile will be disabled in the future: it gives not accurate info and user tend to forget HWBot requires a verification screenshot in 99% of the cases ( like Splave showed you ) Before you go into benching or comparing scores with other users always check out the rules at the frontpage. Click on Benchmarks, choose CPU, GPU or memory benchmarks, select the rules of the benchmark you want to run... Quote
The Otherside Posted April 8, 2020 Posted April 8, 2020 Hey hello, thanks for the replies, ;) was not offended, here to learn, and probably maybe even an automated reaction on one of the settings, so no offence taken at all, if my rig gets seen as 'engineering hardware' how can i even be offended ;) ... thanks Quote
The Otherside Posted April 8, 2020 Posted April 8, 2020 Oh and forgot to mention, it was not about other benchmarks through the xtu profile, but the xtu benchmark it self, every time ... Quote
Crew Leeghoofd Posted April 8, 2020 Crew Posted April 8, 2020 XTU competitive usage at HWBOT has been stopped a while ago due to the fact it is far from stable, newer versions gave way higher output messing up the rankings and last but not least it still can be seriously bugged in output (intentionally or not). Look at this score for instance: https://hwbot.org/submission/4385444_autolochus_xtu_core_i9_9900kf_39631_marks Lately we here that people are running into hardware detection problems (stating they have ES hardware), the output datafile is sometimes no longer compatible with HWBot, ... HWBot has a new owner and once the paperwork is completed we will discus if this bench still has a future here. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.